Dissertation > Excellent graduate degree dissertation topics show

Sensitivity Analysis on Controlling Factors of Water Inrush

Author: JiBaoJing
Tutor: LiuWeiZuo
School: Shandong University of Science and Technology
Course: Safety Technology and Engineering
Keywords: depth of destroyed floor sensitivity orthogonality analysis method FLAC3D numerical simulation
CLC: TD745
Type: Master's thesis
Year: 2008
Downloads: 55
Quote: 1
Read: Download Dissertation

Abstract


Mine water disaster is one of the biggest obstacles affecting and restricting China’s coal production. Only the floor karstic water threats about 42 percent China’s coal base. Therefore, the research on water invasion regularity of coal floor has an important practical and theoretical significance for the coal mine safety production.In this paper, FLAC3D finite difference software is used to simulate the depth of destroyed floor in different working face length, mining depth, exploiting thickness, water pressure and floor lithology. Then, simulation results are calculated by variance analysis method. On the basis of that the sensitivity of main controlling factors is determined. Firstly, according to the actual production experience and results of previous studies, main influence factors of floor water invasion and action principles of these factors are discussed. Then, combining geological conditions of this study, the controlling factors are determined. On the basis of "down three zone" theory, using rock fracture mechanics theory, the formation mechanism and calculation formula of the down three zone are analysis, and dynamic mechanism of floor water invasion is revealed. All of that provides a theoretical basis for sensitivity analysis of floor controlling factors. Then, according to the actual conditions, simulation geological condition is set. Meanwhile, combination experimental conditions, level values of controlling factors are determined. In order to reduce workload, author identified test plan using orthogonal test, and did the numerical simulation by FLAC3D. Through the work of before, the depth of destroyed floor under different controlling factors are determined. Eventually, using orthogonal analysis, charts and linear regression method, further discussed floor water invasion regularity and the sensitivity of main controlling factors. It’s useful for preventing water invasion. And it provides a theoretical guidance for coal mine safety production.Water-inrush is the result of many factors working together. So water-inrush mechanism is very complicated. This paper presents a simple water-inrush law under the ideal geological conditions. In the actual production, coal mines should be based on the specific circumstances of water-inrush simulation to determine water control measures.

Related Dissertations

  1. The Setting Bases of Working Pressure in LNG Systems and Orthogonal Experiment Design of Heat Exchangers,TQ051.5
  2. Study on Springback of High-Strength Steel Stamping,TG386
  3. Numerical Simulation and Experiment on Hydroforming of Cups with Controllable Radial Pressure,TG386
  4. Research on Technology and Mechanism of Joining Cemented Carbide to Carbon Steel,TG454
  5. The Effect of Composite Additive on the SNCR,X701
  6. Numerical Simulation of Film Cooling in Turbine Cascade with Non-Axisymmetric Endwall Method,V231.3
  7. High Speed Aerodynamic Convection and Coupled Heat Transfer of Complicated Bodies,V215.4
  8. The Analysis on Characteris of Vibration Source about Vertical Vibration of Surrounding Environment Induced by Rail Transit,U211.3
  9. Study on the Heat Transfer Characteristics of Particle Cluster in Circulating Fluidized Bed,TK124
  10. Numerical Simulation of SNCR Process of a 600MW Utility Boiler,TK222
  11. Numerical Simulation of Biomass Direct Reburning,TK16
  12. Numerical Simulation on Pulverized Coal Combustion Process in a 670T/H Tangential Firing Furnace,TK224.11
  13. Numerical Simulation on the Combustion Process in the Furnace of a 1000MW Lignite-Fired USC Boiler,TK224.11
  14. Study on Gas-Solid Two-Phase Flow in Spouted Beds,TK173
  15. Experimental Study and Numerical Simulation on Aerodynamic Field of Tangential Bias Swirl Burner,TK223.23
  16. Characteristic Study of Combustion in Central Reverse Flame Chamber,TK223.21
  17. Numerical Simulation and Contrastive Analysis of Labyrinth Seals and Leaf Seals,TK263.2
  18. Numerical Study on Phosphorus Distribution in Water Environment of the Three Gorges Reservoir,X832
  19. The Design and Performance Simulation of External Valve Small Displacement Pump,TE933.3
  20. Analysis of the Impact of Tailings Dam Stability under Seepage Role,TV649
  21. Study on a Pneumatic Manipulator Clamping Force Control System Based on H ∞ Control Theory,TP241

CLC: > Industrial Technology > Mining Engineering > Mine safety and labor protection > Mine drainage and water shutoff > Prevention and treatment of mine flood
© 2012 www.DissertationTopic.Net  Mobile