Dissertation > Excellent graduate degree dissertation topics show

Hydrothermal Synthesis of LiTaO3 Nanopowders and Dielectric Properties of Their Sinters

Author: MaShouTao
Tutor: ChenZhenNing
School: Harbin Institute of Technology
Course: Chemical Engineering and Technology
Keywords: Lithium tantalite Hydrothermal synthesis method Ceramic Doped Dielectric properties
CLC: TB383.1
Type: Master's thesis
Year: 2007
Downloads: 170
Quote: 1
Read: Download Dissertation

Abstract


LiTaO3 is an important piezoelectric and ferroelectric material. As the competition of lead-free piezoelectric ceramics in investigation and exploiture increasingly vehement, the excellent properties of LiTaO3 ceramics are far-ranging cared by scholars. The ceramic powders made by hydrothermal synthesis are symmetrical component, small grain size, high purity, no agglomerated or less agglomerated and its shape and size can be controlled. Especially, it does not need high temperature to calcine, so it avoids grain growth, defect-forming and impurity introduction. For these reasons, the powder has high sintering activity.In the thesis, LiTaO3 nanoparticles were synthesized by hydrothermal method. The influences of several factors, such as starting materials, temperature and reaction time on microstructure of resultant products, were investigated in the hydrothermal process by means of X-ray diffraction （XRD）, infrared spectroscopy （FT-IR） and scanning electron microscopy（SEM）. The optimal conditions of synthesis are obtained as following: reactants are Li2CO3 and Ta2O5, reaction temperature is 240℃and reaction time is 12h. The powder under optimal conditions was characterized by thermal analysis （TG-DTA）. The average particle size and morphology were studied by transmission electron microscopy （TEM）. TEM and X-ray powder diffraction data show that the average size of particles was about 30nm. The Curie temperature is between 630℃and 720℃.Under the definite reaction condition, Fe-doped,Ce-doped and Cu-doped LiTaO3 nanoparticle ceramic powders were studied. The results indicated that, the lattice parameters and crystal volume turned small when doped iron or cuprum. The lattice parameters and crystal volume became large when cerium-doped.The ceramic powders synthesized by hydrothermal method were sintered as starting materials. Structure and morphology of LiTaO3 sinters in different ion-doped and sintered at different temperature were investigated by means of SEM. And then dielectric properties of the samples were measured by wide-band LCD digital electric bridge. The result indicated that LiTaO3 sinters with high density and quality can be obtained at 1000℃. The sintering temperatures had obvious effect on both the room-temperature relative dielectric constant and dielectric loss. Dielectric property of the sinter obtained at 1000℃was better than other temperatures. The room-temperature relative dielectric constant of LiTaO3 sinters were increased due to cerium-doped as well as dielectric loss were decreased to some extent, while the room-temperature relative dielectric constant and dielectr- ic loss of LiTaO3 sinters were decreased due to iron-doped.

Related Dissertations

  1. The Preparation and Thermoelectric Properties of Rare Earth Subsituted Ag Composite Ca3Co4O9-Based Oxides,TQ174.1
  2. Recovery Whey Soy Protein by Microfiltration and Development of Whey Powder,TQ936.2
  3. Preparation of Micro-Arc Oxidation Ceramic Coating on Mg Alloy and the Research of Galvanic Corrosion,TG174.453
  4. Studies on Synthesis, Characterization and Properties of Fe-V Co-doped TiO2 Catalyst,O614.411
  5. Of Bi N Co-doped TiO \u003csub\u003e 2 \u003c/ sub\u003e of the preparation and performance,O614.411
  6. Investigation of Fabrication, Characterization and Property of Fuctional Titanium Dioxide Nanoporous Materials,TB383.1
  7. Investigation of Preparation and Properties of Ordered Porous TiO2,TB383.2
  8. Iron-doped SnO \u003csub\u003e 2 \u003c/ sub\u003e ceramics and thin films research,TQ174.6
  9. Anterior crowns analysis of the clinical effects,R783.4
  10. The Effect of Core:veneer Thickness Ratio on the Flexural Strength of Layered Zirconia and Porceplain Dental Ceramic Materials,R783.1
  11. Total doped TiO 2 Visible Preparation, Characterization and Properties,O643.36
  12. Modification of Thermosetting Resins by High Performance Liquid Crystalline Epoxy Resin,TQ323.5
  13. Research of the Microstructure and Properties of B4C and ZrB2/B4C Ceramic Material by Hot-pressure Sintering,TQ174.1
  14. Synthesis of N-doped ZnO Nanorods by Sol-gel and the Study of Its Capability,TB383.1
  15. Prepared ZnO and Znx Mg1-x Micro/nano-powders by Ultrasonic Spray Pyrolysis,TB383.1
  16. Visible oxide catalyst with high activity and mechanism of Design and Synthesis,O643.36
  17. The Study on the Electrical and Optical Properties of Sm3+ Doped CeO2 Ion Conductor with Different Dopant Concentration,TM911.4
  18. Study on Design and Improvement of Mycophenolic Acid Extraction Process,TQ921
  19. CdSe/ZnS Quantum Dot Doped Fibers and the Gain Performance,TN253
  20. Study on the Preparation of the Oxyfluoride Glass-ceramics/Silicon Dioxide System for LTCC and Tape Casting,TQ174.6
  21. PbSe Quantum Dot-Doped Silicate Fiber Materials by Melting Method,TN304

CLC: > Industrial Technology > General industrial technology > Materials science and engineering > Special structural materials
© 2012 www.DissertationTopic.Net  Mobile