Dissertation > Excellent graduate degree dissertation topics show

Experimental Study on Mechanical Performance of Block Masonry with Reinforced Block under Axial Compression

Author: WangShiLei
Tutor: JiangHongBin
School: Harbin Institute of Technology
Course: Structural Engineering
Keywords: reinforced block masonry shear wall restraint flange member failure model bearing capacity ductility
CLC: TU364
Type: Master's thesis
Year: 2007
Downloads: 61
Quote: 0
Read: Download Dissertation

Abstract


The reinforced concrete masonry shear wall has many merits as a new structural style, and been used more and more recently. As the main load-carrying and lateral force resistant member, the performance of shear wall’s end decides the earthquake-resistance performance of the building. Code for Design of Masonry Structures (GB 50003—2001) only defines transverse restrain of the reinforced concrete masonry shear wall structurally. In order to spread this structural style, it is necessary to study the end resistant of shear wall.In order to improve the mechanical performance of the end of the shear wall, a neotype concrete block in which reinforcement is layout is developed and used in the specimen. The mechanical behavior of the restraint flange member is analyzed by using the specimen under axial compression to simulate it.Firstly, the problem of low reinforcement ratio is solved by the development of the neotype block. The experiment in which there are 7 specimens and 1 unrestraint comparative specimen was performed in the paper. The result of the experiment shows: concrete is confined adequately by the reinforcement of the neotype block. The failure model of specimen with confined reinforcement under axial compression becomes better than that of comparative specimen because of the effective restrain action of confined reinforcement. And the ductility and bearing capacity are improved. Based on the comparison of experimental data, the specimen with circular reinforcement has a better performance than those with rectangular reinforcement on bearing capacity and deformation. The reinforced concrete masonry shear wall with the neotype block can be spreaded in the high earthquake intensity area.Secondly, the effects on the bearing capacity and deformation resulted from several factors such as the volume reinforcement ratio, the style and the space of reinforcement are investigated in this paper by analyzing experimental data. The formulas for calculating the maximum stress and maximum strain of the specimen are offered in this paper. And what’s more, a stress-strain curve equation of restraint flange member is concluded, showing that theoretical curve gets a good agreement with experimental one. Finally, Experimental conclusion is verified by ANSYS with reasonable model and parametric selection, and an extensive parametric analysis is performed finally based on the verification.

Related Dissertations

  1. Study on the Environmental Cost on the Basis of Environmental Systems Reproduction Theory,F406.72
  2. Experimental Studies on High Temperature Material、 Carbonization and Flexural Behavior of Flexural Member of RAC,TU528
  3. Study on Shear Bearing Capacity of HRBF500-Reinforced Concrete Beams,TU375.1
  4. Mechanical Property Analysis on Concrete Short Columns with Strengthened Style Hoop,TU375.1
  5. Study on Development Model under the Environmental Carrying Capacity Constraint,X26
  6. Study on the Ductility of Reinforced Concrete Special-shaped Columns with Different Design Parameters,TU375.3
  7. Stirrups confined concrete performance Size Effect,TU375
  8. Lining the structure carrying capacity study tunnel fire,U451
  9. Experimental Investigation and Study on the Bridges Strengthened Using Steel Plate and Concrete Composite Strengthening Technique,U445.72
  10. Rapid Evaluation Methods and Analysis Program Development of the Bearing Capacity for Reinforced Concrete Girder Bridge,U441
  11. Active Bridge Section Consolidation Method Increases,U445.72
  12. Flexural Strength and Ductility of Hybrid Girders Fabricated from High Performance Steel,U448.36
  13. A Study on the Relationship between Land Environmental Bearing Capacity and Scale of Pig-Farm Pig-Farm,S828
  14. Experimental Study on Basic Mechanical Properties Short of Columns with Strengthened Style Hoop,TU375.1
  15. Experimental Study on Mechanics Capability of Concrete-Filled Square Thin-Walled Steel Tube Short Columns,TU398.9
  16. The Research of Bearing Capacity and Influence Factors of Steel-tube Truss Nodal Using Screw,TU392.3
  17. A Study on Eurocodes about the RC Elements Design and Comparison between Eurocodes and Chinese Codes,TU375
  18. Experimental Study on the Seismic Behavior of the Walls Made of Sintered Shale Porous Bricks,TU364
  19. Performance Analysis of ZW Shear Wall Under Low Cyclic Loading Based on ANSYS,TU398.2
  20. Experimental Study on Dynamic Performance of Eroded Layered Steel Fibre Reinforced Concrete Beams,TU375.1
  21. The Analytical Study on the Node of Steel Frames with Reduced Beam Sections,TU391

CLC: > Industrial Technology > Building Science > Building structure > The structure of the soil, brick, stone,bamboo,wood > The structure of the large brick block structure and a large wooden partition ( Wall )
© 2012 www.DissertationTopic.Net  Mobile