Dissertation > Excellent graduate degree dissertation topics show

Study on the Technology of Waste Bamboo-plastic Composition

Author: YangBao
Tutor: YuYunShui
School: Central South University of Forestry Science and Technology
Course: Wood Science and Technology
Keywords: Bamboo / plastic composites Waste plastics Quadratic orthogonal rotation combination design Waste bamboo plywood template
CLC: TS653
Type: Master's thesis
Year: 2008
Downloads: 65
Quote: 0
Read: Download Dissertation

Abstract


In this paper, bamboo and scrap and thermoplastic waste plastic as the main raw material , manufactured by hot pressing bamboo and scrap / thermoplastic waste plastic composites . Thesis Bamboo Particle Surface Modification impact on the physical and mechanical properties of the composites and composite material made ??to take the best process parameters ; waste bamboo plywood template bamboo and scrap / waste plastic composite materials manufacturing process explore . A comparative study of the the bamboo the SCRAP surface modified approach : maleic anhydride and phenolic resin , bamboo and scrap handling was better . However , based on the production cost considerations , this paper with phenolic resin as a modifier for the surface treatment of the bamboo SCRAP , and conducted a process parameter optimization of the modified phenolic resin processing bamboo SCRAP : The results show that the phenolic resin added in an amount of 3.8% , bamboo and scrap and waste plastic mixing ratio of 8:2, and the hot press temperature of 196 ° C , the the preparation sheet density 1.02g/cm3 24h thickness swelling of 5.72% , the bending strength 19.1MPa elastic modulus 2894MPa, tensile strength 9.7MPa ; waste Bamboo Plywood template with waste plastic to take composite material technology , through the experiment showed that the optimum process parameters : temperature 195 ° C , the mixing ratio of 7:3 , the particle size of 14 mesh to 40 mesh. Experimental research in the maximum bending strength of 19.1MPa, the maximum elastic modulus reached 2419MPa , the maximum tensile strength of 9.3 MPa ; studied bamboo strips and sacks enhancement processing of composite materials , the test results show that : by phenolic resin treated the bamboo composites enhance better . System reinforced composite material , thickness swelling 24h 4.03% , density 1.11g/cm3 static bending strength 42.77MPa , elastic modulus 3831MPa, tensile strength 24.9MPa .

Related Dissertations

  1. Business Plan of Environment-friendly Packaging Materials,F426.8
  2. Environmental Safety Assessmental of Waste Plastic Recycling Products,X705
  3. Environmental Risk Assessment and Control of Waste Plastic Recycling Products,X705
  4. Study on the Modified Asphalt by Recycled Plastic,U414
  5. The Design of Sorting Recycled PET/PVC Plastic Waste Based on Near-infrared Sensor,TQ320.7
  6. Effects of Fertilizer on Yield、 Nutrition and Cation-Anion Balance of Alfalfa,S541.9
  7. Study on the Preparation and Properties of Wood-Plastic Composites,TQ320.6
  8. Study of the Pyrolysis Kinetics of Several Typical Waste Plastics,X705
  9. Study on the Technology of Preparing RDF by Waste Plastic Packaing Film,X705
  10. Optimization of Single Cell Protein by Quadratic Orthogonal Rotation Combination Design,S816
  11. Study on Compatibility of Wheat Straw Fiber, Waste Plastics and Polypropylene,TB332
  12. Development of a catalyst in cracking waste plastics -to-oil process,O643.3
  13. Study on the Rearing Condition and Bioenrichment to Zinc of Tenebrio Molitor L,S899
  14. Environmental behavior of polymer materials and additives in water,TB324
  15. Three kinds of single plastics and mixed plastics degradation in supercritical water,X705
  16. Waste plastic film , dry cleaning and equipment,TB43
  17. The research and development of the conductive polymer - based composite material of the waste,TB332
  18. Fundamental Study on Co-Coking with Blend Coal and Waste Plastics,TQ520
  19. Primary Study of Recycling Waste Plastic Films to Produce Anti-slipping Panel and Pipes,X705
  20. Waste plastics and waste oil catalytic cracking of research to take fuel oil,TE667

CLC: > Industrial Technology > Light industry,handicrafts > Wood processing industry,furniture manufacturing industry > Processing > Wood-based panel production
© 2012 www.DissertationTopic.Net  Mobile