Dissertation > Excellent graduate degree dissertation topics show

The Design and Realization of Ultrasonic Generator

Author: WangRong
Tutor: LiZeXiang
School: Harbin Institute of Technology
Course: Control Science and Engineering
Keywords: Ultrasonic generator Current closed-loop control Impedance matching Optimum matching inductor
CLC: TG439.9
Type: Master's thesis
Year: 2010
Downloads: 171
Quote: 0
Read: Download Dissertation

Abstract


Thermo-sonic wire bonding is a vital technology in semiconductor packaging industry. Nowadays, a welding spot is completed in about 20 ms, and high consistency of all welding spots is demanded by semiconductor packaging industry. Traditional ultrasonic wire bonding devices only have harmonic frequency tracing function, so its amplitude of ultrasonic vibration rises slowly and unstable. This kind of ultrasonic bonding devices cannot keep up with the development of semiconductor packaging industry.By analyzing the equivalent electrical model of ultrasonic transducer, this thesis proved that the vibration amplitude of ultrasonic transducer is proportional to drive current and the better matching inductor matches ultrasonic transducer, the bigger the ratio is. Based on the conclusion mentioned above, an experimental method was proposed to find optimum matching inductor. Furthermore, equivalent electrical model of transformer was analyzed to get equivalent inductance of transformer winding. Optimum matching inductor and equivalent inductance of transformer winding make it possible to get optimum impedance matching network.Based on the proportional relationship between the vibration amplitude of transducer and drive current, an advanced ultrasonic generator with current closed-loop control was designed and realized by this dissertation. It also prevents ultrasonic generator from failing to trace harmonic frequency and eliminates the mutual influence between PLL and current closed-loop. In contrast to traditional ultrasonic generator, the rise time of drive current is shortened from 4 ms to 2 ms.

Related Dissertations

  1. X, Ku band microwave front-end key technology research,TN722.3
  2. Research new broadband microstrip antennas and arrays,TN822
  3. MEMS-based silicon substrate dual band microstrip antenna array Research,TN822
  4. Traction substation transformer protection research,TM407
  5. The Design of Receiving and Emission System for Cable Faults’ Non-destructive Examination,TP274
  6. The Design for Examination Equipment of Temperature and Humidity,TP21
  7. Distill and Analysis of Defect Signial in Active Infrared Nondestructive Testing,TH878
  8. The Research of CMOS RF Mixer for UWB,TN773
  9. Development on High Power Ultrasonic Generator and The Experimental Rsearch on Utrasonic Emulsifying,TB559
  10. Theoretical analysis and experimental study of the C-band dual- gap output cavity,TN61
  11. Research on Design of PLC Noise Filters in HVDC Systems,TN713
  12. Design of Differential CMOS Low Noise Amplifier,TN722.3
  13. Front sonar system interference analysis and phased array receiver design,U666.7
  14. Design and Implementation of Ultrasonic Generator Used for Coalbed Methane Extraction Experiment,TD842
  15. The Study of Absorption Theory for Macromolecule Functional Material,TB34
  16. S-band coupled-cavity TWT plasma coupling structure design and test theories,TN124
  17. Development of Coupe Filter for Power Line Communication Based on Impedance Matching,TM73
  18. Study Ultrasonic in the Cleaning Technology,TB490
  19. Research and design of the wire bonding frequency ultrasonic generator,TB517
  20. Impedance Matching Balance Transformer Protection,TM41
  21. RF power supply with automatic impedance matching technology research,TN86

CLC: > Industrial Technology > Metallurgy and Metal Craft > Welding, metal cutting and metal bonding > Welding equipment > Other Welding Equipment
© 2012 www.DissertationTopic.Net  Mobile