Dissertation > Excellent graduate degree dissertation topics show

Overall Cost Control Analysis for Thermal Power Plant Engineering Construction Project

Author: ZhouZhenSheng
Tutor: HuangWenJie；WuLianGui
School: North China Electric Power University (Beijing)
Course: Industrial Engineering
Keywords: thermal power plant engineering cost control management analysis
CLC: F284
Type: Master's thesis
Year: 2008
Downloads: 294
Quote: 6
Read: Download Dissertation

Abstract


This article focally analyze present status of all cost control management for thermal power plant engineering, all factors management of all cost control management for thermal power plant engineering, all team cost management for thermal power plant engineering, all risk control and method of all cost control management for thermal power plant engineering. According to Datang Taiyuan Second Thermal Power Plant 2X300MW Project (Phase VI), this article summarizes the detail method of cost control at each stage for thermal power plant engineering. In fact, the all cost control management of engineering is a kind of dynamic management process in all process, all factors, all risk and all team management. Base on all process management, four important points that be paid attention to are design, inviting bidding, contract management and budget control management. Accordingly, it can make sure that the target of cost control management for thermal power plant engineering is in the control. This is the final conclusion of this article.

Related Dissertations

  1. Research on Developmental Strategies of Commercial Fitness Clubs in Nanning Based on SWOT Analysis,G80-05
  2. Quantitative Analysis of Pyrolysis Component of Typical Low Volatile Coal of Chinese,TQ530.2
  3. Research on Mechanism Analysis and Modeling Simulation of Horizontal Well Tractor,P631.83
  4. Research on the Mainframe System of Powder Mixed EDM and the Craft Experiment,TG661
  5. Image Analysis System of Metal Transfer of Gas Metal Arc Welding,TG444
  6. EDM Electrode Wear Mechanism and Control Research,TG661
  7. The Effect of Composite Additive on the SNCR,X701
  8. Tooth Profile Modeling and Machining Error Analysis of the Face Gear,TH132.41
  9. Finite Element Analysis and Structure Optimal Design for Combined Seal at Normal Temperature and Low Temperature,TH136
  10. Error Analysis and Measurement Method Design for the Hemispherical Resonator Gyro,V241.5
  11. Pattern Classification of Combustion Modes in Scramjet,V235
  12. Temperature Drift Modeling and Compensation of Fiber-Optic Gyroscopes,V241.5
  13. Simulation Analysis on Temperature Stress of RCC Arch Dam and Its Construction Joints Design Research,TV642.2
  14. Analysis and Study of Abutment Stability in Concrete High Arch Dam by Three-Dimensional Nonlinear Finite Element Method,TV642.4
  15. Key Technologies of Dam-break Life Loss Risk Assessment Research,TV122.4
  16. The Research on the Architectural Adumbral Method of Building,TU226
  17. Based on Nonliner Finite Element Analysis of the Infilled Wall Frame Structure,TU323.5
  18. Study on the Improvement Depth of Dynamic Consolidation by Methods of Mathematical Physics,TU472.31
  19. The Flow Theroy Investigation of Compressor Cascade with Split,TK474.8
  20. Transient Thermal Analysis of Multi-Body System with Complicated Boundary Conditions,TK124
  21. Research on Testing and Analyzing Technology for Time Parameter of Aerospace Relay,TM58

CLC: > Economic > Economic planning and management > Infrastructure the economy > Organization and management of infrastructure
© 2012 www.DissertationTopic.Net  Mobile