Dissertation > Excellent graduate degree dissertation topics show

The Numerical Analysis and Engineering Application Study on the Mechanism of Bolt Support and Bolt-Grouting Support in Soft Rock Roadway

Author: ZhaoHengBo
Tutor: WangZaiQuan
School: Qingdao Technological University
Course: Engineering Mechanics
Keywords: Soft Rock Roadway Bolt Support Bolt-grouting Support FLAC Numerical Simulation Large Deformation
CLC: TD353
Type: Master's thesis
Year: 2008
Downloads: 146
Quote: 0
Read: Download Dissertation

Abstract


The support for soft rock roadway is one of the main issues for coal industry.This question has not been solved,because of the complicated mechanical property of soft rock.And the underground pressure is obviously appeared.Thus it has caused stability control difficulty for the roadway.These problems have seriously affected the production of the mining area.Moreover,there also presents some "exceptional" phenomenon,such as the effect of supporting is not obviously,even deteriorated after increasing the length and cross-area for bolt.Therefore,the thesis carries through the following research work aiming at study on the soft rock roadway support in Longkou Mining Area by theoretical analysis,on-site data analysis and numerical simulation.1.The Longkou mining area has the typical characteristics of the soft rock.So it has very vital practical significance to the soft rock roadway support research.In this paper,through analyzing the measured data of Longkou mining area in the second chapter,the basic rule of the underground pressure appearance for the soft rock roadway is obtained.These mainly include the rule about deformation of the roadway,the damage characteristics of the roadway and so on.2.A key question of research soft rock roadway support is the mechanical properties of soft rock.Therefore,the third chapter of this article had started from the concept and characteristic of the soft rock.And the third chapter had studied the soft rock roadway’s failure mechanism and support’s principle.Besides,it has proposed two support and pretect structures.And it had described the supporting mechanism of these structures in detail.3.On the basis of theoretical analysis,the fourth chapter had made the simple introduction about the FLAC.According to the actual situation of Longkou Mining Area, the numerical simulation model and the plan had been determined.And the FLAC had been used to carry out the numerical simulation.Then there analyzed the results.Finally, the chapter had carried on the analysis about the application situation in Longkou mining area.4.Through the research of the strength reduction theory,the fifth chapter had introduced the theory and the function in FLAC.The numerical simulation results in the fourth chapter had been carried on the intensity discount by the order of SOLVE FOS in FLAC.The safety factor of soft rock in the roadway had been discussed. 5.In the conclusion part,the principle of design and construct in soft rock roadway’s support had been proposed.This part had carried on the quality synthetic evaluation to these structures,and explained the unusual condition of soft rock roadway support in the Longkou mining area.This part had also made the summary for the numerical simulation and the safety factor solution research in soft rock roadway’s support.In addition,in this part had proposed the forecast for the soft rock roadway’s support question.

Related Dissertations

  1. The Setting Bases of Working Pressure in LNG Systems and Orthogonal Experiment Design of Heat Exchangers,TQ051.5
  2. Study on the Heat Transfer Characteristics of Particle Cluster in Circulating Fluidized Bed,TK124
  3. The System Design and Computational Fluid Dynamics Simulation for Chemical Looping Combustion,O35
  4. Numerical Simulation of Radio-frequency Dielectric Barrier Atmospheric Pressure Glow Discharges,O461.2
  5. Ship Numerical simulation of bubble wake,U674.701
  6. 1500 m water depth tension leg platform motion and mooring Numerical and Experimental Study,U661.7
  7. New Marine gas turbine exhaust ejector research,U674.703.5
  8. Water-rich sand and gravel formations Shield Excavation Numerical Simulation of surface subsidence caused by,U455.43
  9. High efficiency and low noise centrifugal fan Numerical Simulation and Optimization,TH432
  10. Grid ring and compact spinning agglomeration process simulation study generated additional twist,TS104.77
  11. MW-class wind turbine hub ductile iron QT350-22LT high- cycle fatigue properties of,TG255
  12. Submerged arc welding heat source magnetron roll Numerical simulation and experimental study,TG455
  13. Under the electric field strength electrothermal effect of metallic materials,TG111
  14. Die-cast magnesium alloy automotive steering column bracket CAE,TG249.2
  15. 7200 tons of water pressure on the lower beam of the casting process,TG24
  16. Magnetic field double wire submerged arc welding heat Numerical simulation and experimental study,TG445
  17. Cutting Slope Quasi Presplit Blasting Technology Research,U416.113
  18. Modeling Theory and Experiment Research for Flexible Multibody System with Large Deformation,TB122
  19. Continuous hot dip galvanized strip stable transmission , heat transfer and organizational change behavior,TK124
  20. Typical coal and mixed coal on NOx emissions and boiler slagging Numerical Simulation,TK227.1
  21. Pull off pieces of structural damage to buried nonlinear analysis numerical simulation,V222

CLC: > Industrial Technology > Mining Engineering > Mine the pressure and support > Mine support equipment > Roadway support
© 2012 www.DissertationTopic.Net  Mobile