Dissertation > Excellent graduate degree dissertation topics show

Effects of γ-RAY Irradiation on T700 Carbon Fiber and Its Composite Interface Performance

Author: MaYueXin
Tutor: HuangYuDong
School: Harbin Institute of Technology
Course: Polymer Chemistry and Physics
Keywords: T700 carbon fiber γ-ray irradiation Mechanical properties of the interface Composite
CLC: TB332
Type: Master's thesis
Year: 2010
Downloads: 102
Quote: 1
Read: Download Dissertation

Abstract


In recent years, T700 carbon fiber has become increasingly received attention because of its excellent performance such as high strength and high modulus. However, the fiber surface is so smooth that the interface properties of composite materials have been limited. In this paper, 60Coγ-ray irradiation graft technology was used in order to enhance the interface properties of the indigenous T700 carbon fiber reinforced epoxy composite.The tensile strength of single fiber of untreated and irradiated T700 was tested, and the statistical average strength was calculated using two-parameter Weibull distribution method. The results indicate that the effect ofγ-ray irradiation on the strength of T700 carbon fiber body is not obvious. The interfacial properties of T700 composites were evaluated by the interlayer shear strength （ILSS）, interfacial shear strength （IFSS） and flexural strength. The results show that the optimum irradiation condition should be nitrogen atmosphere and epoxy chloropropane used as grafting solution under the irradiation dose of 30kGy. It is found thatγ-ray irradiation can make the fractography of T700/epoxy resin composite more smooth, and the adhesion between fiber and resin is increased effectively. The hydrothermal aging property of T700/epoxy composite material was investigated, and it is shown thatγ-ray irradiation can deduce the damage of ILSS and flexural strength caused by ernvironment.The morphology of T700 was characterized by scanning electron microscopy （SEM） and atom forced microscopy （AFM）, respectively. The fiber surface roughness was increased, and the mechanical engagement between fiber and matrix resin was enhanced. The contact angles between T700 and three kinds of liquid, such as water, ethylene glycol and diiodomethane, were measured to calculate the fiber surface energy. The results show that the contact angles decreased because of theγ-ray irradiation, and the fiber surface energy has different levels of increase with the improvement of wettability. The surface chemical elements and functional groups of untreated and irradiated T700 were observed by photoelectron spectroscopy （XPS）. The results show that the value of O/C and the quantity of oxygen functional groups on T700 surface were enhanced efficiently after treatment byγ-ray irradiation graft technology. The reaction ofγ-ray irradiation grafting T700 was studied according to the results above.

Related Dissertations

  1. Study on Theory and Experiment of Wire Drawing with Composite Ultrasonic Vibration,TG663
  2. Technology of Filling Clearance and Optimizing the Bonds during Ultrasonic Brazing,TG454
  3. Study on Preparation of Composite Cross-linked Modified Modified Potato Starch,TS236.9
  4. Municipal tourism land use planning environmental impact assessment,X820.3
  5. The Combined Effect of Several Environmental Factor on Fertilization, Hatching and Juvenile Growth of Nile Tilapia,S917.4
  6. Research on the Theory of the Transmission-line Metamaterials and Their Applications,O441.6
  7. Of Bi N Co-doped TiO \u003csub\u003e 2 \u003c/ sub\u003e of the preparation and performance,O614.411
  8. Preparation and Characteration of Composite Microspheres with Dual-, Triple- Responsive Properties,O631.3
  9. Development of Functional Automotive Interior Textiles,TS106.6
  10. Adjustable composite element frequency selective surface design,TN713
  11. Coal miners and practice unsafe behavior measurement,X936
  12. Nano LaFeO 3 Controllable Synthesis and TiO 2 bridged construct composite photocatalyst,O643.36
  13. PVA / Polystyrene Composite Nanofibers Preparation and Characterization,TQ340.1
  14. With shape memory alloy (SMA) fiber composite box driven nonlinear deformation of thin-walled beams,TB33
  15. Composite fiber BiVO 4 Preparation and visible light photocatalytic properties of dyeing wastewater,X791
  16. Properties on Aramid 1313 Fabric and the Compound Silastic Rubber Composite Material with This Fabric,TB332
  17. Preparation of Composite Nanofibers Via Elecrtrospinng,TB383.1
  18. Preparation of Surface-functionalized Graphene and Its Influence on the Mechanical Properties of Nanocomposite Materials,TB332
  19. The Suppression Method on Timing Jitter of High Rate Solitons Transmission System,TN929.11
  20. The Study of Forming Process and Properties of PTT/PET Skin-Core Composite Monofilament with Large Diameter,TQ340.64
  21. Study on Properties of Compound Dynamic Damper,TB535.1

CLC: > Industrial Technology > General industrial technology > Materials science and engineering > Composite materials > Non-metallic composite materials
© 2012 www.DissertationTopic.Net  Mobile