Dissertation > Excellent graduate degree dissertation topics show

Some Analytical Analysis of Flow and Heat Transfer Behavior in Injection Molding

Author: MengRuiYan
Tutor: LiuChunTai
School: Zhengzhou University
Course: Materials Processing Engineering
Keywords: injection molding analytical solution flow and heat transfer
CLC: TQ320.662
Type: Master's thesis
Year: 2010
Downloads: 25
Quote: 0
Read: Download Dissertation

Abstract


Injection molding is the main processing method in batch production of 3D exact complex plastic part. It produces more than one third of all plastic product. Injection molding is a complex procedure of flow and heat transfer, as the melt’s procedure of flow and heat transfer in the filling system and cavity are very complex. Though numerical method makes much progress in the analysis of velocity field, temperature field and pressure field in injection molding, numerical simulation lacks exact descriptions of variety of physics fields in molding procedure are very short in the numerical simulation. Hence, realizing the analytical analysis of flow and heat transfer problems in injection molding becomes an effective method by which variety of physics fields in molding procedure are realized and understand in detail.Therefore, to realize the scientific understanding of injection molding procedure, detailed analysis for the classical flow and heat transfer problems in filling process of injection molding is made based on the analytical thinking.Firstly, for the flow and heat transfer problems of feeding system, based on Ellis model and governing equations in One-dimensional cavity, analytic calculation the variation of pressure field, flow rate and temperature in changes with different process conditions. Meanwhile, the effects of the heat conduction, thermal diffusion and shear heating thermal convection on flow and heat transfer behavior were investigated.Secondly, for the injection molding of regular-sized plastic parts with microstructure is a specific flow and heat transfer problem with multi-scale geometric structure. A hybrid method combined numerical simulation and analytical solution was used to analyze the flow behavior of this multi-scale geometric structure. Finite element/finite difference method was carried out to simulating the filling processing in macro cavity, and the profile of pressure at entry of microstructure is obtained. Meanwhile, an analytical model is formulated to correlate the injection distance in the microstructure with entrance pressure, micro geometric dimensions, flow rates and material properties.Lastly, in connection with the temperature profiles of forming process, similar solutions with differential equations theory was used to analysis the effects of the thermal convection, heat conduction between the melt and the wall, viscous heat consumption on temperature profiles. And then, discussion the effects of different process parameters on the temperature field in thickness direction.This thesis is supported by the National Natural Science Foundation (10872186).

Related Dissertations

  1. Analysis of the Injection Molding and Mold Design of the Small Car Plastic Parts,TQ320.662
  2. Injection Process Analysis and Optimized Deign of MP4 Product Based on the Moldflow Software,TQ320.662
  3. Three-dimensional unsteady heat conduction boundary element method and numerical systems development,O241.82
  4. Design and Implementation of the Process Monitoring and Fault Diagnosis for Injection Molding,TQ320.5
  5. Within the connection developed to detect its mechanical properties of zirconia abutment,R783.6
  6. Numerical Study of Heat Transfer Enhancement in the Tubes,TK124
  7. Research on Surface Quality Improvement of Microcellular Foam Injection Molding Parts,TQ320.662
  8. Solver based on single epoch of GPS technology research orientation,P228.4
  9. Metal powder injection molding computer simulation,TF124.39
  10. Study on the Processing Parameters on Mechanical Properties of Microcellular Injection Molded Parts,TQ320.662
  11. Study of Flow and Heat Transfer Characteristics under Flow Fluctuation Condition,TK124
  12. Numerical Simulation on Three Dimensional Heat Transfer and Flow of Supercritical Hydrocarbon Fuel,TK124
  13. Plate-fin Heat Exchanger Performances Under Variable Medium Thermodynamic Properties,TK172
  14. The Lattice Boltzmann Simulation of Gas Flow and Heat Transfer in Compact Porous Media,TK124
  15. Analysis of Runner System of Injection Mold Design for Wheels of Minicar with CAE Technology,TQ320.66
  16. Research of Predictive Control for Injection Velocity Control on Injection Molding,TQ320.662
  17. Simulation and Optimization of Process in Injection Molding for TIR-R Lenses,TQ320.662
  18. Effects of Pipe Diameter and Dynamic Load on the Flow and Heat Transfer Characteristcs of Two-phase Boiling Flow,TK124
  19. Car engine cooling water jacket steady flow and heat transfer simulation,U464.138
  20. Research on Injection Foaming Molding of Polypropylene (PP)/Wood-Flour Composite,TB332

CLC: > Industrial Technology > Chemical Industry > Synthetic resins and plastics industry > General issues > Production process and production technology > Forming > Injection molding
© 2012 www.DissertationTopic.Net  Mobile