Dissertation > Excellent graduate degree dissertation topics show

Study on Mechanical Properties of Starch-PVA Blend Film for Warp Sizing

Author: ShaoZhengPing
Tutor: ZhuZhiFeng
School: Jiangnan University
Course: Textile Engineering
Keywords: phosphorylated starch(SPH) acetylated starch(SA) PVA blend film mechanical properties
CLC: TS103.846.1
Type: Master's thesis
Year: 2008
Downloads: 207
Quote: 1
Read: Download Dissertation

Abstract


The main aim of the paper is that natural starch sizes were modified by chemical method in order to enhance its sizing properties. Two kinds of esterification starch sizes were prepared by using sodium tripolyphosphate and vinyl acetate as esterifying agent respectively. And the starch esters with different degree of substitution were obtained by varying the feed ratio of esterifying agent to cornstarch. The dependences of molecular structure of PVA, modification extent of phosphorylated starch, the blending ratio of phosphorylated starch to PVA on mechanical properties of starch-PVA blend film were investigated. The experimental results demonstrate that the molecular structure, modification extent, and the blend ratio show evident influences on mechanical properties of the film. For the phosphorylated starch, as the degree of substitution increases, the breaking elongation increases, while the breaking strength of the film increases initially and then decreases. A maximal strength appears when the degree of substitution is 0.016. As the content of starch in the film rises, the breaking elongation decreases, whereas the breaking strength initially decreases and then increases. Maximal breaking strength is obtained when the content is 50 percent. Increasing the molecular weight and degree of hydrolysis of PVA favors enhancing the mechanical strength and bent-fatigue resistance of the film. For the acetylated starch, as the degree of substitution increases, the breaking strength, the breaking elongation and flexibility increases, while wear loss of the film decrease. As the content of starch in the film rises, the breaking elongation and flexibility decreases, whereas wear loss of the film increases. Maximal breaking strength is obtained when the content is 50 percent. Increasing the molecular weight and degree of hydrolysis of PVA favors enhancing the mechanical strength and bent-fatigue resistance of the film.

Related Dissertations

  1. Reactive Hot-Pressing and Mechanical Properties of （ZrB2-ZrO2）/BN Composites,TB332
  2. Research on Welding Characteristics of CO2 Laser-GMA Hybrid Welding for Ultra-Low Carbon Bainitic Steel,TG456.7
  3. Microstructure and Mechanical Properties of Mg-Zn-Y-Zr Alloys,TG146.22
  4. Technology of Filling Clearance and Optimizing the Bonds during Ultrasonic Brazing,TG454
  5. Flow Field Numerical Simulation and Performance Analysis for the Conical Hydrostatic Bearing,TH133.36
  6. Numerical Simulation of Film Cooling in Turbine Cascade with Non-Axisymmetric Endwall Method,V231.3
  7. Research on the Dynamics of Rotor-Cylindrical Bearing System and Rotor-Elloptical Bearing System,TK263.6
  8. Research of the Performances of Ferroelectric Film and Compositional-Graded Ferroelectric Film,TM221
  9. TV drama fashion element,J905
  10. A Feasibility Study of IMRT Dosimetric Verification Using Radiochromic Film,R815
  11. Study on the Recycling of Post-Consumer Polyester Textiles,X791
  12. Fabricationand Properties of SiC-AlN Multiphase Ceramics Prepared by Gelcasting,TQ174.62
  13. Study on the Mechanical Properties of Pva-high Toughness Cementitious Composites,TU528
  14. Synthesis of Polysulfones and Modification for Epoxy Adhesives,TQ433.437
  15. LSGM electrolyte thin films and electrochemical properties of,TM911.4
  16. Research on Spinning Performance of Collagen and PVA Composite Solution,TQ340.64
  17. Modification for PVA-Based Composite Packaging Material with Nano-SiO2 and Its Influence on Fresh Preservation Effect of Salted Duck Eggs,TS253.46
  18. The Preparation and the Properties of the Composite Films from Cassava Starch and Guar Gum,TS236.9
  19. Preparation of Bio-material Liquid Film and Its Applying Effects,S316
  20. Studies on the Physiology and Biochemistry Characteristics and Fresh Keeping Technology of Post-Harvest in Pleurotus Eryngii,S646
  21. Research on the Effectively Blend in Career Planning Education and Ideological and Political Education of University Students,G641

CLC: > Industrial Technology > Light industry,handicrafts > Textile industry,dyeing and finishing industry > General issues > Textile industry machinery and equipment > Textile accessories, equipment and auxiliary materials > Auxiliary materials > Slurry > Starch
© 2012 www.DissertationTopic.Net  Mobile