Dissertation > Excellent graduate degree dissertation topics show

Research on Mine Hoist with Three-level Inventer’s Speed-adjustable System of Variable Frequency

Author: GuoXiWen
Tutor: ZhuLongJi
School: Anhui University of Technology
Course: Power Electronics and Power Drives
Keywords: mine hoist inverter svpwm direct torque control fixed synthesizing vectors
CLC: TM464
Type: Master's thesis
Year: 2008
Downloads: 418
Quote: 4
Read: Download Dissertation

Abstract


With the rapid development of power electric & elctronic devices, microelectronic technique and modern control theories, AC drive has made great progress. Mine hoist AC speed-adjustable control which is one of an important application of AC drive has received wide attention.Mine hoist AC speed-adjustable system of high performance not only conserves energy, but also improves the running performace of high-power synchronous motor remarkably. At the same time, due to the multi-level inverter circuit’s remarkable advantage (for example:less output harmonic & on-off frequency, etc.), it should be the preferred scheme which controls the main circuit of mine hoist speed-adjustable by using frequency conversion. Therefore, this paper which is based on mine hoist by using three-level & synchronous motor drive system, aimming at the studies of the diode-clamped three-level inverter system by using frequency conversion.In this paper, mine hoist electric dragging scheme, topology structure, control method for mine hoist inverter circuit and high-power devices have been summed up firstly. then, it has discussed the characteristics of mine hoist’s journey control & craftwork requirement. The speed setting mode has been analysed and contrasted with the rotate speed-adjustable close-loop system. And, it has expounded the complex control theroy’s practical meaning. Secondly, bacing on them, the SVPWM control strategy of three-level inverter has been studied stressfully. This section has analysed the production of seven segment vector method in reference voltage vector, its sectors, the judgement of small triangle area and other key taches surrounding by the space voltage vector figure. It has also analysed the three-level inverter’s neutral-point voltage excursion producing mechanism simultaneously, giving a maths solving method.Since there existed some relationship between the diode-clamped three-level inverter’s neutral-point voltage excursion and the output currents, it is necessary to build an universal model. This whole maths model was constructed inα-βtwo-phase stationary reference frame. On the basis of the space vector of fixed synthesizing vectors which the pre-researcher has brought forward, this paper has explored the three-level & synchronous motor DTC control strategy elementary and designed the system design figure as a whole, combining with two-level DTC control method. And, the corresponding simulative model has been established, which confirming the validity of academic production. Finally, it has also designed and studied the system’s key taches such as inverter, excitation rectifying device and main control fibre-optical communication, combining with ACS6000 hoist drive. Through the debugging software DriveWindows, locate debugging has been carried through. Contrasted with locate debugging waveform shape, it also confirm the correctness of the given simulation scheme which this paper has done. It has also suggestted that the drive system worked reliably and satisfied with the manufacture craftwork’s desire.

Related Dissertations

  1. Study on Drive and Control System of Five-Phase PMSM Based on FPGA,TM341
  2. Simulation Research on Compound-Structure Permanent-Magnet Synchronous Machine System Used in Hybrid Electric Vehicles,TM341
  3. Control System Design for Position Sensorless Permanent Magnet Synchronous Motor,TM341
  4. Study of Low Speed Control Strategy on Induction Motor Speed Sensorless,TM343
  5. Research on Solar Energy Photovoltaic Grid-connected System,TM615
  6. Research on the Grid-connected Photovoltaic System Based on Cascaded Multilevel Inverter,TM464
  7. The Research of Wind Power Generation System Based on DFIG,TM614
  8. FPGA-based motion control system design,TM341
  9. A Project about Intergrative Control System of Elevator Drive and Power Feedback,TP273
  10. Single phase photovoltaic grid-connected inverter control technology research,TM464
  11. Control Strategy for Single-Phase Grid-Connected Inverter with LCL Filter,TM464
  12. Design and Implementation of Centralized Controller for Modular Photovoltaic Inverter,TM464
  13. The Research on Distribution Network Protection Strategy Based on the Analysis of Fault Characteristics of Inverter-based Distributed Generation,TM77
  14. Development of Electric Actuator Servo System,TM921.541
  15. Application of Frequency Conversion Transformation in Shajiao a Power Plant #5 B Condensate Pump,TM921.51
  16. Research on Phase-lock Loop and Current Control Technologies of Grid-Connected Inverters in Conditions of Voltage Dips,TM464
  17. Design of Inverter Control System for Low Speed and High Torque Compound PMSM,TM341
  18. Research on DC1500V Metro Auxiliary Power Supply System,TN86
  19. FPGA-based motor motion controller design and implementation,TM301.2
  20. Brushless doubly- fed wind generator Direct Torque Control Technology,TM315
  21. 10kW single-phase photovoltaic inverter system and control technology research,TM615

CLC: > Industrial Technology > Electrotechnical > Transformers, converters and reactors > Converter > Inverter
© 2012 www.DissertationTopic.Net  Mobile