Dissertation > Excellent graduate degree dissertation topics show
Application of Artificial Neural Network in Simulation of Extractive Distillation and Reactive Distillation
Author: FengGuoHong
Tutor: SongHaiHua
School: Tianjin University
Course: Chemical Engineering
Keywords: Extractive Distillation Reactive Distillation Simulation Artificial Neural Network Amendatory BP algorithm
CLC: TQ028.31
Type: Master's thesis
Year: 2007
Downloads: 163
Quote: 1
Read: Download Dissertation
Abstract
|
Extractive distillation and reactive distillation have been widely used for their low cost, low energy consumption and high separating efficiency. However, as the special distillation processes, the simulation of extractive distillation and reactive distillation is comparatively complicated and is of a lot of shortages. As a result, a simulation method which is simple and more efficient is significant for reducing cost and enhancing efficiency.In this dissertation, artificial neural network (ANN) model which is trained by momentum back propagation with variable learning rate are presented to simulate extractive distillation and reactive distillation without the consideration of the specific process and mechanism in the columns. The results indicate that excellent effects can be achieved by ANN models with high simplicity. The feasibility of CHEMCAD for simulating extractive distillation and reactive distillation is validated by comparison of the simulated data and experimental data. So CHEMCAD can be used to provide sufficient data for ANN to make up the shortage of experimental data when setting up ANN models. Then by comparing the different predicted results of the training set and testing set to establish the optimal structure of ANN models, which the different predictive results are produced by ANN with different transfer function and nodes in hidden layer.In this thesis, the extractive distillation for separating methanol-acetone mixture and reactive distillation for synthesizing of methyl acetate are taken as examples to demonstrate the simulation method, and the results show the ANN models trained by momentum back propagation with variable learning rate has higher precision and less training time than the ANN which be trained by common BP algorithm for simulating this two processes.
|
Related Dissertations
- The Setting Bases of Working Pressure in LNG Systems and Orthogonal Experiment Design of Heat Exchangers,TQ051.5
- Study of Interaction between Epoxy Molecules and Carbon Fiber Surface with Molecular Simulation,TB332
- Research on Mechanism Analysis and Modeling Simulation of Horizontal Well Tractor,P631.83
- Study on Springback of High-Strength Steel Stamping,TG386
- Numerical Simulation and Experiment on Hydroforming of Cups with Controllable Radial Pressure,TG386
- Research on Technology and Mechanism of Joining Cemented Carbide to Carbon Steel,TG454
- The Brake Performance of Hydraulic Retarder and Simualtion Research on Its Application for Aircraft Arrestment,TH137.331
- Development of the Platform for Compressor Optimization Design and Aerodynamic Optimization Design in the Transonic Compressor,TH45
- Satellite Attitude Determination Based on Gyro and Star Sensor,V448.2
- Numerical Simulation of Film Cooling in Turbine Cascade with Non-Axisymmetric Endwall Method,V231.3
- Research on Orbital Control Method for Space Rendezvous and Docking,V526
- High Speed Aerodynamic Convection and Coupled Heat Transfer of Complicated Bodies,V215.4
- The Analysis on Characteris of Vibration Source about Vertical Vibration of Surrounding Environment Induced by Rail Transit,U211.3
- Single Neuron PID Control for Electro-Hydraulic Servo Unit of Ship Rudder,U666.152
- Simulation Analysis on Temperature Stress of RCC Arch Dam and Its Construction Joints Design Research,TV642.2
- Study on the Heat Transfer Characteristics of Particle Cluster in Circulating Fluidized Bed,TK124
- Numerical Simulation of SNCR Process of a 600MW Utility Boiler,TK222
- Numerical Simulation of Biomass Direct Reburning,TK16
- Numerical Simulation on Pulverized Coal Combustion Process in a 670T/H Tangential Firing Furnace,TK224.11
- Numerical Simulation on the Combustion Process in the Furnace of a 1000MW Lignite-Fired USC Boiler,TK224.11
- Study on Gas-Solid Two-Phase Flow in Spouted Beds,TK173
CLC: > Industrial Technology > Chemical Industry > General issues > Chemical processes ( physical processes and physical and chemical processes ) > Separation process > Single-phase system liquid mixture separation process > Distillation and rectification
© 2012 www.DissertationTopic.Net Mobile
|