Dissertation > Excellent graduate degree dissertation topics show

Fabrication and Characterization of Powder SiOC Micro-/Mesoporous Ceramics from Silicon Resin

Author: DuanLiQun
Tutor: MaQingSong
School: National University of Defense Science and Technology
Course: Materials Science and Engineering
Keywords: SiOC porous ceramic silicon resin micro-/mesopore post treatment thermal-stability
CLC: TQ174.1
Type: Master's thesis
Year: 2010
Downloads: 51
Quote: 2
Read: Download Dissertation

Abstract


Due to unique combination of pore structure and excellent performance of ceramic, SiOC porous ceramics show great potential for a number of industrial applications such as separation, gas storage, catalysis and removal of pollutants and so on. In this dissertation, novel methods of fabricating SiOC porous ceramics from silicon resin were studied, and the results are as followed.Powder SiOC porous ceramics were synthesized from commercial silicon resin （SR249）. Components and pore structures of the pyrolysates were systematically studied by some testing methods such as N2 adsorption, X-ray diffraction, IR, element analysis, SEM and so on.Fabrication Study of powder SiOC porous ceramics was conducted according to pyrolysis behavior of silicon resin in the begingning. The result shows powder SiOC porous ceramics majored in mesorporosity are obtained by pyrolysis between 1250℃and 1450℃. The pore volume and BET surface area can reach to as high as 0.214cm3/g and 65.696m2/g respectively, with the pore size distribution in the range of 0nm up to 30nm.To improve BET surface area and pore volume of the pyrolysates, post treatments were adopted from the scaffold structure of the SiOC ceramics, and the results are as followed.By HF （hydrofluoric）-acid etching for more than 5 hours, powder micro and mesoporous SiOC ceramics （rich in free carbon） were synthesized using the pyrolysates above. The BET surface area and pore volume can each reach as high as 1148m2/g and 0.608cm3/g respectively, with the pore size distribution in the range of 0nm up to 6nm. This kind of porous ceramics with free carbon may show great potential in sorption, separation areas and so on for their good thermal-stability in Ar atmosphere below 1600℃.By oxidation in air at 650℃for more than 4 hours, powder mesoporous SiOC ceramics （without free carbon） were synthesized using the etched products above. The surface area and pore volume can each reach as high as 204.017m2/g and 0.58cm3/g respectively, with the pore size distribution in the range of 4nm up to 12nm. This kind of porous ceramics without free carbon may show great utility value as catalyst supports area in harsh condition.

Related Dissertations

  1. Thermal Stability of Complexes of Chitosan Quaternary Ammonium Salt and Metal Ion,O634
  2. Synthesis and Application of the chloro- methoxy fatty acid methyl esters,TQ414.8
  3. Syntheses, Structures and Properties of Metal-organic Frameworks Based on Dicarboxylate Ligands,O621.13
  4. Imidazolium ionic liquids Thermal Analysis,O626.23
  5. Research and Engineering Improvement of Gelatin一based Gummy on Its Thermodynamie Stability,TQ461
  6. Screening Mutational Sites That Enhance Protein Thermostability by High Temperature Molecular Dynamics Method,Q51-33
  7. Study of SiN x -Doped SbTe Phase-Change Materials for Phase-Change Random Access Memory,TP333
  8. 10kV grounding resistor Thermal Stability,TM862
  9. Lactic acid -based copolymer / vermiculite ceramic composites and properties of,TB332
  10. A novel organic-inorganic hybrid mesoporous materials synthesis and for PC / ABS flame retardant research,TB33
  11. Fabrication and Characterization of Highly Porous SiOC Ceramics from Silicone Resin,TQ174.1
  12. Study on Solid State Reaction of Metal/SiGe and Its Contact Characteristics,TN304
  13. Stability of Recombinant Enzyme Preparation of α-CGTase,Q814
  14. Purificiation of Cryptococcus Laurentii Lipase and Rapid Measurement of Lipase Thermostability,Q78
  15. Bioploymer/Layered Double Hydroxide Nanocomposites: Preparation, Structure and Properties,TB383.1
  16. Fabrication and Properties of Titania Nanotube Arrays by Anodic Oxidation,TB383.1
  17. Study on Microstructure and Properties of Deformation Processed Cu-Fe in Situ Composites,TB331
  18. Preparation and Study of a Kind of Anion Exchange Membrane with Ether Bond,TB383.2
  19. Synthese, Structureand Characterization of Transition Metalcomplexes with Heterocyclic Carboxylic Ligands,O621.13
  20. Novel Phosphalated Phosphazene: Research in Their Preparation and Properties,O627.51
  21. Study on Synthesis and Property of Water-soluble Polyelectrolyte,O631.3

CLC: > Industrial Technology > Chemical Industry > Silicate > Ceramic Industry > Basic theory
© 2012 www.DissertationTopic.Net  Mobile