Dissertation > Excellent graduate degree dissertation topics show

Design and implementation of a novel CPLD-based multi-channel data acquisition card

Author: GongPing
Tutor: HuangZuo
School: University of Electronic Science and Technology
Course: Signal and Information Processing
Keywords: DAQ embeded system programmable logical device PCI bus
CLC: TP274.2
Type: Master's thesis
Year: 2008
Downloads: 390
Quote: 2
Read: Download Dissertation

Abstract


DAQ(Data AcQuisition) system has been widely used in the field of industrial control&testing and signal processing. The complexity of testing environment and the intrinsic nature of signals have always been the major concerns in DAQ system designing. In most traditional multi-channel DAQ systems, it could easily be noticed that not only all the input channels must be in working state when the device is on, but they also have to work in the same sampling frequecey at a time. However, this is not the case in many situations, although one had to admit it is a very convenient way of designing. Sometimes, when the input signals are in different frequency domains, or the number of actual signal signals is less than the total number input channels provided by the DAQ system, there could be a great waste of system resource due to the limited input bandwidth. This article comes up a noval method of eliminating the defects of traditional DAQ system. The DAQ system discussed in this paper could sample signals in different frequency domain at a time, and could also be configured to accommodate input channels according to actual situation. With these characteristics, this DAQ system could maximize the usability of the input bandwidth and is suitable for most data acquisition cases.The DAQ system discussed in this paper is brought up by an ongoing project, and system flexibility is the main focus. The background and the current status of the project have been discussed in the first chapter. In chapter two, the hardware schematic and the devices used have been generally introduced. Chapter three mainly focus on CPLD programming and its internal module designing. The essences of this paper:“the preepmitive channel scaning algorithm”has been thoroughly covered in this section. After that, how to develop a PCI device driver on Windows system is dicussed in the next chatpter. In the end, system debugging and testing is applied to evaluate the overall performance of the DAQ system.

Related Dissertations

  1. Application of AWG in Decoy Protection Equipment,TN97
  2. Design and Implementation of Communication System between Double-chips Based on PCI Bus,TN47
  3. The Design and Application of PXI/PCI Bus Device Driver,TP336
  4. Interface Driver Design and Realization of Mutiple-dsp Parallel Processing for Route Planning System,TP368.12
  5. Train Communication Network in research and development related interfaces,TN915.852
  6. Data Acquisition System Based on PCI Bus Research and Design,TP274.2
  7. The Research and Application of Fuzzy Neural Networks in Adhesive Production Process,TP183
  8. Design on Smart Test Diagnosis Technology of Electirc Control Box,TM507
  9. Design and Realization of Launcher Integrated Test System Based on DSP and FPGA,TJ06
  10. The Research of Large Screen LED Display System Based on Embedded Technology,TN873
  11. Study on MgB2 Supperconducting Receiving Coil,O482.531
  12. The Research of Impact Test System Control and Data Acquisition,TH87
  13. Based on Virtual Technology biochemical analyzer,TP274
  14. Research on the Control and Daq for a Doppler Wind Lidar,TN958.98
  15. Development on Scanning A/D Mudule Based on LXI,TP274
  16. Design of Test and Control System for Drilling Rig Hoisting Laboratorial Platform,TE928
  17. Research on MES Techniques of Automobile Assembly Line,TP311.52
  18. The Research and Application of Electronic Information Experimental Platform Based on Virtual Instrument,TN0-4
  19. The Design of Embedded Encryption Card Based on PCI Bus,TP309.7
  20. Study on the Monitoring of the SBS Modified Asphalt’s Manufacturing Process,U414
  21. The Design of Auto-feeding System of Numerical Control Punch Based on ARM,TG385.9

CLC: > Industrial Technology > Automation technology,computer technology > Automation technology and equipment > Automation systems > Data processing, data processing system > Data collection and processing systems
© 2012 www.DissertationTopic.Net  Mobile