Dissertation > Excellent graduate degree dissertation topics show

50 automatic high temperature reverse bias test bed hardware and software design

Author: LiJiaHong
Tutor: KangBo;HuZe
School: University of Electronic Science and Technology
Course: Software Engineering
Keywords: current detection programable high voltage DC power supply complex programmable logic device (CPLD) digital / analog converter analog / digital converter
CLC: TM933.1
Type: Master's thesis
Year: 2010
Downloads: 9
Quote: 0
Read: Download Dissertation

Abstract


As the key components of energy-saving lamps (including electronic ballasts), The power switch transistor plays a key role in energy-saving lamp life.The most important Parameter of transistor is Leakage current in high temperature. Different manufacturers are in addition to the factory of the leakage current characteristics at room temperature under the testing, companies set aside a certain proportion of the high temperature reverse bias test, the test equipment early have a simple function and complicated designed. Application of modern industrial computer and Complex programmable logic device and new DAC / ADC, as same time of simplify the design, increases the stability and multiple functions of equipment while simplifying design.This paper is the product reliability requirements for the company, with modern automatic control technology and chip technology, designed as a fully automatic high-temperature reverse bias of 50 experimental units. The main designs are:1、Precision current detection, the detection range 0-9.999mA;2、Multi-function testing bridge converter;3、Programable high voltage DC supply, voltage range: 0~1000V/500mA;4、50 Road automatic inspection control;5、16-bit high precision D / A, A / D conversion control;6、The software of automatic control and inspection records;There are altogether 50 groups of current detectors, 4 branches each group. The detectors employ negative feedback current detection technique, composed of high precision metal film resistors, micro relays and operational amplifiers. In the multi-functional transforming test bridge high voltage micro relays are used, which can automatically connect or disconnect each pin of the DUT according to the purpose of tests, and therefore increases flexibility of the instrument. Mainly providing a reverse bias for the DUT, programmable high voltage DC supply produces an output which satisfies the design requirements by raising output voltage and current of the operational amplifier in a linear way. Meanwhile, the efficiency of the linear supply is improved by reducing its heat dissipation through controlled input voltage. The automation unit is an industrial computer which controls various functional modules through extended ISA bus and I/O interfaces. The architecture of the circuit is greatly simplified through the application of I/O extension, digital control logic and programmable CPLD.

Related Dissertations

  1. Both the DC bias and harmonic compensation device key problems,TM761.1
  2. Implantable enzyme sensor tag system architecture and chip design research,TP212.3
  3. Submerged arc furnace unbalanced three-phase symmetrical component analysis method,TM933.1
  4. Automatic 50 high temperature reverse bias experimental system software design,TM769
  5. Tamping automatic guidance system design and implementation,U216.6
  6. Research on Single-Phase Parallel Active Power Filter,TN713.8
  7. Research on the Control Module of a Multi-network Gateway and the Bandwidth Measurement Technology,TN915.05
  8. Research on Closed-Loop Control Strategy of Harmonic Current of APF,TN713.8
  9. Study on the Application of Harmonic Detection Technology to Active Power Filter,TN713.8
  10. Study on Current Detection Method and Control Technology of STATCOM Based on Instantaneous Reactive Power Theory,TM761
  11. Research of Harmonic Current Detection Method Based on Instantaneous Reactive Power Theory in STATCOM,TM76
  12. The Design of Analog to Digital Conversion Circuit in Speech Recognition System,TN912.34
  13. Harmonic Detection and Simulation of Active Power Filter Based on Hilbert-Huang Transform,TN713.8
  14. The Research of Pulsed Eddy Current Testing Technology,TH878
  15. Design of Reactive Power Compensator Based on DSP,TM761.1
  16. Design of the Low-Pass-Filter for Harmonic Detecting in Active Power Filter,TN713.4
  17. Study on Engineering Application of PMSM Precision Servo,TM341
  18. Development of 7KVA Three-phase/single-phase Inverter,TM46
  19. The GMM-FBG Current Transformer and Its Application Technology,TP212
  20. Design and Research on Shunt Active Power Filter,TN713.8

CLC: > Industrial Technology > Electrotechnical > Electrical measurement techniques and instruments > Power the number of measurements and instrumentation > Current measurement and instrumentation
© 2012 www.DissertationTopic.Net  Mobile