Dissertation > Excellent graduate degree dissertation topics show

Flow simulation based on network analysis of diesel engine lubrication system

Author: ChouYuLin
Tutor: BiYuHua
School: Kunming University of Science and Technology
Course: Power Machinery and Engineering
Keywords: Diesel Engine Lubrication System Simulation Experimentation
CLC: TK423
Type: Master's thesis
Year: 2009
Downloads: 85
Quote: 0
Read: Download Dissertation

Abstract


Well-lubricated system of the diesel engine has the functions of lubrication, cooling, anti-rust, cleaning and others. Besides the functions above, the design of modern internal combustion engine lubrication system also need to meet the ever-increasing emission regulations, especially the regulation on the limit of diesel PM emission. Therefore, the reduction of oil consumption will inevitably become a very important aspect in the research and development of internal combustion engine.This paper took the lubrication system of four-cylinder diesel engine as research subject, analyzing the lubrication system with one-dimensional flow simulation based on the network analysis method and doing experiment on the lubrication system of diesel engine. It introduced the research method and simulation software about lubrication system, and the flux of main circuit and the temperature, pressure of the key components in lubrication system were tested with the appropriate method which the paper designed. Also the testing results were analyzed, and the one-dimensional model of CAE simulation for a four-cylinder diesel engine was established based on the actual performance of circuit size and components, simulating the lubrication condition of each part in lubrication system realistically. The model’s accuracy was proved through comparing the simulation data with the testing data.Through comparing the simulation analysis with the actual testing results, the results are concluded that the design of lubrication systems for the diesel engine is reasonable, and the friction parts can be sufficiently lubricated. But there are also some places that need optimization. First of all, the pressure loss is very serious in the oil circuit of the lubrication system. At the maximum speed, the pressure loss in the oil cooler reaches to 0.052 Mpa, and the pressure loss in oil filter reaches to 0.085Mpa, while the pressure loss of the oil pump outlet to the main oil circuit even reaches 0.222Mpa. So it can be considered that the oil cooler and oil filter should be redesigned or new oil filter which can meet the EuropeⅢemission regulations. Through comparing the minimize film thickness at maximum speed and maximum torque with the allowable film thickness given by the Technical research institute of Liszt at Austria, the surface of main bearing formed a fluid dynamic lubrication,and the engine main bearing is reliable;Thirdly, when compared with the calculation results of experience formulas, the oil quantity of cooling nozzle is a little inadequate. Through increasing the diameter of cooling nozzle orifice from 1mm to 1.05mm, the injection quantity of cooling nozzle meeting the needs of experience formulas can be achieved, guaranteeing the heat releasing balance of piston group.

Related Dissertations

  1. The Setting Bases of Working Pressure in LNG Systems and Orthogonal Experiment Design of Heat Exchangers,TQ051.5
  2. Study of Interaction between Epoxy Molecules and Carbon Fiber Surface with Molecular Simulation,TB332
  3. Research on Mechanism Analysis and Modeling Simulation of Horizontal Well Tractor,P631.83
  4. Study on Springback of High-Strength Steel Stamping,TG386
  5. Numerical Simulation and Experiment on Hydroforming of Cups with Controllable Radial Pressure,TG386
  6. Research on Technology and Mechanism of Joining Cemented Carbide to Carbon Steel,TG454
  7. The Brake Performance of Hydraulic Retarder and Simualtion Research on Its Application for Aircraft Arrestment,TH137.331
  8. Satellite Attitude Determination Based on Gyro and Star Sensor,V448.2
  9. Numerical Simulation of Film Cooling in Turbine Cascade with Non-Axisymmetric Endwall Method,V231.3
  10. Research on Orbital Control Method for Space Rendezvous and Docking,V526
  11. High Speed Aerodynamic Convection and Coupled Heat Transfer of Complicated Bodies,V215.4
  12. The Analysis on Characteris of Vibration Source about Vertical Vibration of Surrounding Environment Induced by Rail Transit,U211.3
  13. Single Neuron PID Control for Electro-Hydraulic Servo Unit of Ship Rudder,U666.152
  14. Simulation Analysis on Temperature Stress of RCC Arch Dam and Its Construction Joints Design Research,TV642.2
  15. Study on the Heat Transfer Characteristics of Particle Cluster in Circulating Fluidized Bed,TK124
  16. Numerical Simulation of SNCR Process of a 600MW Utility Boiler,TK222
  17. Numerical Simulation of Biomass Direct Reburning,TK16
  18. Numerical Simulation on Pulverized Coal Combustion Process in a 670T/H Tangential Firing Furnace,TK224.11
  19. Numerical Simulation on the Combustion Process in the Furnace of a 1000MW Lignite-Fired USC Boiler,TK224.11
  20. Study on Gas-Solid Two-Phase Flow in Spouted Beds,TK173
  21. Experimental Study and Numerical Simulation on Aerodynamic Field of Tangential Bias Swirl Burner,TK223.23

CLC: > Industrial Technology > Energy and Power Engineering > Internal combustion engine > Diesel engine > Structure
© 2012 www.DissertationTopic.Net  Mobile