Dissertation > Excellent graduate degree dissertation topics show

Numerical Simulation of Aerodynamic Performance of the Compressor’s Typical Stages

Author: HuangZuo
Tutor: HanWanJin
School: Harbin Institute of Technology
Course: Power Machinery and Engineering
Keywords: Numerical Simulation Axial flow compressor Type surface static pressure Aerodynamic performance Unsteady Flow
CLC: TK473
Type: Master's thesis
Year: 2010
Downloads: 30
Quote: 0
Read: Download Dissertation

Abstract


As an important component of gas turbine, compressor plays a decisive role on the efficiency and power of gas turbine. Modern high-power gas turbine sets higher requirements on performance of compressor, such as high pressure ratio, high speed, high efficiency, but requires high reliability, long life and low weight.Based on the comprehensive research on simulation of aerodynamic performance of axial multistage compressor at home and abroad, the current developing status of numerical simulation of axial multistage compressor was reviewed. This paper gave a brief introduction about CFD chief characters and application in our country at present.In order to study the aerodynamic performance and configuration of axial multistage compressor, Numeca was used to carry out three-dimensional numerical simulation at No.14, 15, 16 stage of the multi-stage axial compressor. The meshes were generated by IGG, and used the single equation Spalart-Alimaras model to numerically simulate three stages of the compressor in FINE.Through three-dimensional numerical simulation of three stages of the axial compressor, total performance analysis for the stages of compressor was carried out firstly; analyzed blade design feature through studied profile static pressure, profile limit streamline, as well as the entropy contours on S3 section in three compressor operating conditions: design condition, surge condition, and choking condition.The three stages of compressor were studied by unsteady numerical solution of Harmonic method which applied for multi-stage axial turbo machinery. The unsteady flow field of the 14, 15, 16 stage was analyzed. The interference between the blades under unsteady condition and periodicity changes of the aerodynamic loads on blade surface were studied by contrast entropy and pressure in a cycle. This paper calculated aerodynamic load on each blade, analyzed the fluctuations and amplitude of the changes of aerodynamic force, aerodynamic torque and aerodynamic angle in different times in a cycle.The result showed that with the increase of the outlet pressure, the flow got more complex. Because of large negative incidence in inlet the of stator , rotor and stator matching should be improved in design. The flow of the end-wall deviated from the design condition because of the role of viscous friction and flow of the previous stage accumulation, so total performance could be improved by better match of flow angle between stages. Pressure fluctuations induced by the wake and the potential flow would clearly reflect in unsteady fluctuations of the aerodynamic load on the blade.

Related Dissertations

  1. The Setting Bases of Working Pressure in LNG Systems and Orthogonal Experiment Design of Heat Exchangers,TQ051.5
  2. Study on Springback of High-Strength Steel Stamping,TG386
  3. Numerical Simulation and Experiment on Hydroforming of Cups with Controllable Radial Pressure,TG386
  4. Research on Technology and Mechanism of Joining Cemented Carbide to Carbon Steel,TG454
  5. Numerical Study of the Effect with Straight and Bowed Stator in Different Axial Gaps,TH45
  6. Numerical Simulation of Film Cooling in Turbine Cascade with Non-Axisymmetric Endwall Method,V231.3
  7. High Speed Aerodynamic Convection and Coupled Heat Transfer of Complicated Bodies,V215.4
  8. The Analysis on Characteris of Vibration Source about Vertical Vibration of Surrounding Environment Induced by Rail Transit,U211.3
  9. Study on the Heat Transfer Characteristics of Particle Cluster in Circulating Fluidized Bed,TK124
  10. Numerical Simulation of SNCR Process of a 600MW Utility Boiler,TK222
  11. Numerical Simulation of Biomass Direct Reburning,TK16
  12. Numerical Simulation on Pulverized Coal Combustion Process in a 670T/H Tangential Firing Furnace,TK224.11
  13. Numerical Simulation on the Combustion Process in the Furnace of a 1000MW Lignite-Fired USC Boiler,TK224.11
  14. Study on Gas-Solid Two-Phase Flow in Spouted Beds,TK173
  15. Experimental Study and Numerical Simulation on Aerodynamic Field of Tangential Bias Swirl Burner,TK223.23
  16. Characteristic Study of Combustion in Central Reverse Flame Chamber,TK223.21
  17. Numerical Simulation and Contrastive Analysis of Labyrinth Seals and Leaf Seals,TK263.2
  18. Numerical Study on Phosphorus Distribution in Water Environment of the Three Gorges Reservoir,X832
  19. The Design and Performance Simulation of External Valve Small Displacement Pump,TE933.3
  20. Analysis of the Impact of Tailings Dam Stability under Seepage Role,TV649
  21. Study on Hydraulic Fracturing of Low Permeability Reservoir,P618.13

CLC: > Industrial Technology > Energy and Power Engineering > Internal combustion engine > Gas turbine ( gas turbine ) > Structure
© 2012 www.DissertationTopic.Net  Mobile