Dissertation > Excellent graduate degree dissertation topics show

A Numerical Simulation Study on Piston Skirt Profile Design

Author: HouYaWei
Tutor: XieWeiSong
School: Tianjin University
Course: Basic mathematics
Keywords: Piston Skirt Profile Designing Lubricating Galerkin FEM
CLC: TK403
Type: Master's thesis
Year: 2010
Downloads: 67
Quote: 0
Read: Download Dissertation

Abstract


The piston skirt surface design is a particularly important part of the pis-ton design in modern high-speed and advance-performance engines.It directly impacts on the formation and maintenance of oil film,as well as the piston fric-tion.And thus,it could determine the efficiency and lifetime of the engines.In this essay,the tangential movement of piston was first analysized from the perspective of tribology, And Reynolds equation describing the piston movement was given.Secondly,the sencond-order equation of the piston transverse movement was concluded through the analysis on the lateral force which is exerted on the piston.And then,the mathematical model of piston movement inside the cylinder was established.Then by respectively calculating in the method of Galerkin finite element and Runge-Kutta,a series of data showing the influence on the oil film thickness,piston friction and the extent of piston lateral swing,which will be the basis to optimize the skirt surface design,were got.Numerical experiments show good results and verify the correctness of the algorithm mentioned above.

Related Dissertations

  1. Study on Contact Fatigue Life Based on Grease Variation with Temperature,TH117.22
  2. The mechanical hydraulic Confined Piston Engine multidisciplinary collaborative optimization design support environmental research,TP311.52
  3. Differential engine rotor assembly Structural Design and Analysis,TK403
  4. Research on the Structural Emission Noise of Axial Piston Pump,TH137.51
  5. Analysis and Simulation of Piston-exhausting Air-powered Engine,TK402
  6. Automotive engine piston pin anti- friction and wear properties of,U464.13
  7. Noise and Vibration’s Optimization of Rotary Compressor,TB652
  8. Lubrication and Friction Analysis of Diesel Engine Piston Skirt and Optimal Design,TK421.9
  9. The Design and Analysis of Hydraulic System for the Weapon Bay Door of An Aircraft Based on AMESim,V223
  10. Digital hydraulic components and hydraulic control system,TH137.5
  11. Control Charateristic Research on Axial Variable Displacement Piston Pump with Displacement-Force-Feedback Principle,TH322
  12. Multi-Paprameter Detection System Design for Lubricating Oil Based on J1939 Protocol,TM311
  13. Diesel engine piston assembly dynamics influencing factors,TK421
  14. Piston pump rotor squeeze cast hanging forming process simulation and optimization,TG24
  15. Oil Consumption and Piston Ring Adherence with the Cylinder Liner Distorting,TK401
  16. CAN Bus-Based System for Monitoring the Excircle Diameter of Piston Pin,TP274
  17. Preparation of Ethylene-Propylene Copolymer Lubricant Viscosity Index Improver,TE624.82
  18. Free piston Stirling generator control system of permanent magnet linear,TM31
  19. Heat Transfer and Pressure Drop Characteristics of R410a-oil Mixture Flow Condensation Inside 5mm Horizontal Enhanced Tube,TK124
  20. Radial variable piston pump / motor with a high-speed switching valve and solenoid research,TH134

CLC: > Industrial Technology > Energy and Power Engineering > Internal combustion engine > General issues > Structure
© 2012 www.DissertationTopic.Net  Mobile