Dissertation > Excellent graduate degree dissertation topics show

Research of the Improvement of a Small Gasoline Engine Based on CFD

Author: XuJingZhao
Tutor: ZhangBaoHuan
School: Tianjin University
Course: Power Machinery and Engineering
Keywords: Internal Combustion Engine CFD Intake System Numerical Simulation
CLC: TK412
Type: Master's thesis
Year: 2010
Downloads: 86
Quote: 0
Read: Download Dissertation

Abstract


In the internal combustion engine, the cooperation of the intake system and the shape of combustion chamber has a significant on the intake charge、the mixture formation and the combustion process, so it is important to design of the intake system and the combustion chamber in the engine. The calculation of the flow system in the internal combustion engine has developed uncommonly with the development of computational fluid dynamics (CFD)、computer technology and the other related disciplines .CFD is an effective means in the process of engine research and design , because it can provide more information than experiment. It can also identify the key control variables out of the many factors more easily, so it benefits to reduce the cycle and the cost in the research and design of the engine.First of all , This paper improved its intake system based on the research of relevant literature both domestic and abroad, as well as referenced to the experiences of others. and then set up the three dimensional models and conducted the three dimensional numerical simulation to the engine using the UG and AVL FIRE software whose intake system has improved. In order to make the intake tumble better, the piston top shape was also changed on the foundation of the previous simulation.The experiment of the engine intake system which has been improved was done in order to measure the inlet flow under the different valve lift . At the same time, the comparison with the simulation value was carried . And the result showed that the flow coefficients coincide with each other in different valve lift , which proved the correctness of the three dimensional numerical simulation. The simulation of the engine which was improved was also done so as to comprehend the details of the spatial distribution flow in the intake and compression processes and theirs changes with crank-angle , focusing on analysis of the changes of the law of evolution and the flow characteristics in the“Inlet-Valve-Cylinder”flow field through improving. Simultaneously, in order to understand the differences on the torque and fuel consumption between the improved engine and the previous engine, the experiments on the two engines were done too.

Related Dissertations

  1. The Setting Bases of Working Pressure in LNG Systems and Orthogonal Experiment Design of Heat Exchangers,TQ051.5
  2. Study on Springback of High-Strength Steel Stamping,TG386
  3. Numerical Simulation and Experiment on Hydroforming of Cups with Controllable Radial Pressure,TG386
  4. Research on Technology and Mechanism of Joining Cemented Carbide to Carbon Steel,TG454
  5. Numerical Simulation of Film Cooling in Turbine Cascade with Non-Axisymmetric Endwall Method,V231.3
  6. High Speed Aerodynamic Convection and Coupled Heat Transfer of Complicated Bodies,V215.4
  7. The Analysis on Characteris of Vibration Source about Vertical Vibration of Surrounding Environment Induced by Rail Transit,U211.3
  8. Study on the Heat Transfer Characteristics of Particle Cluster in Circulating Fluidized Bed,TK124
  9. Numerical Simulation of SNCR Process of a 600MW Utility Boiler,TK222
  10. Numerical Simulation of Biomass Direct Reburning,TK16
  11. Numerical Simulation on Pulverized Coal Combustion Process in a 670T/H Tangential Firing Furnace,TK224.11
  12. Numerical Simulation on the Combustion Process in the Furnace of a 1000MW Lignite-Fired USC Boiler,TK224.11
  13. Study on Gas-Solid Two-Phase Flow in Spouted Beds,TK173
  14. Experimental Study and Numerical Simulation on Aerodynamic Field of Tangential Bias Swirl Burner,TK223.23
  15. Characteristic Study of Combustion in Central Reverse Flame Chamber,TK223.21
  16. Numerical Simulation and Contrastive Analysis of Labyrinth Seals and Leaf Seals,TK263.2
  17. Physically Based Real-Time Fluid Simulation Technique,TP391.41
  18. Numerical Study on Phosphorus Distribution in Water Environment of the Three Gorges Reservoir,X832
  19. The Design and Performance Simulation of External Valve Small Displacement Pump,TE933.3
  20. Analysis of the Impact of Tailings Dam Stability under Seepage Role,TV649
  21. Study on Hydraulic Fracturing of Low Permeability Reservoir,P618.13

CLC: > Industrial Technology > Energy and Power Engineering > Internal combustion engine > Gasoline > Design, calculation
© 2012 www.DissertationTopic.Net  Mobile