Dissertation > Excellent graduate degree dissertation topics show

Numerical and Physical Study on Flow Control Devices and Its Application on Four-strand Round Tundish for Panchenggang

Author: PengKeDiao
Tutor: WenGuangHua；LiuQi
School: Chongqing University
Course: Metallurgical Engineering
Keywords: four-strand tundish flow control device numerical and physical simulation cleanness
CLC: TF777
Type: Master's thesis
Year: 2008
Downloads: 73
Quote: 1
Read: Download Dissertation

Abstract


In order to improve the continuous casting (CC) efficiency and satisfy the requirement of high qualitative products, in recent years, the metallurgists have taken a serious action on strengthening and enlarging the metallurgical function of a tundish. One of the important measures was that the appropriate flow control devices were installed to form the reasonable flow pattern, which not only made the inclusions floatation but also created the advantageous condition to uniform the liquid steel temperature and composition.The four- strand round bloom caster tundish at Chengdu Iron and Steel, Pan Steel Group was the objects for investigation in the dissertation. The best flow control device in the tundish had been chosen used by the numerical and physical simulation. The experiment model was made of Plexiglas, which was 1/3 of the prototype. The experiments had been carried into execution based on the Froude similarity by similarity principle. The numerical model that describing the flow phenomena in the tundish was established according to the continuity equation, momentum equation and energy equation, meanwhile the FLUENT commercial software was used to calculate.Some conclusions could be drawn according to the study on the tundish. When no flow control devices were equipped, obvious short-circuited flow and large dead region existed in the tundish, the flow and temperature field were not uniform and the inclusions were difficult to be removed. When case 11 had been used, the average residence time of molten steel could be prolong marvelously, the dead region decreased , the piston flow region increased, the inclusions were easy to be removed and the flow and temperature filed were more uniformly distributed. Consequently, case 11 was recommended for industry producing at Chengdu Iron and Steel, Pan Steel Group.When used the recommended flow control device in trial, the baffle and dams hadn’t been destroyed on the whole and the shape of holes remained intact after casting. The temperature discrepancy of different flow was below 5℃in the tundish, and the temperature distribution was uniform. The inclusion content that the size was larger than 100μm in the casting bloom was not found, and the average steady non-metal inclusion content decreased 41.1%, and the total oxygen content had decreased 30.7% in the tundish. The A、B、C、D rating results of the non-metal inclusion of the tubing were in the range of 1.0 level. The flow control device had an better effect on metallurgical functions in the tundish.

Related Dissertations

  1. Optimization of Flow Field of Slab Mold Using Numerical and Physical Simulation Method,TF777
  2. The Preliminary Study Andapplication of Reflection Seismic Exploration Technique Applied in Coal Mine Underground,P631.4
  3. Research on Different Harbor Scales Effect to the Wave Distribution in Harbor,TV139.2
  4. The Analysis of Seismic Dynamic Response of Slopes in Mountains with Complex Geological Backgrounds,P315.9
  5. The Stability Study at the Middle of Auxiliary Hole of Jinping in Yalong River,TV221.2
  6. A Study on the Fluid Entry Profile Reverse of Polymer Injection Well and Its Enfluence on Flooding Effect,TE357.46
  7. Optimization of Tundish Structure in Four-Strand Billet Continuous Caster by Physical Modeling,TF341.6
  8. Physical and Mathematical Simulation on the Tundish and Mould for 4-Strand Bloom Continuous Caster in Panzhihua Steel,TG23
  9. Research on Stress and Deformation Analysis and Structure Optimized Design of Flat Receptacle,TB121
  10. Study on Deoxidation by Hydrogen and Natural Gas in Molten Steel,TF704.1
  11. A Priliminary Study of Splitting Extrusion on Spur Gear,TG61
  12. Reciprocating extrusion of AZ31 magnesium alloy simulation of coupled thermo,TG146.22
  13. Influence Pattern of Navigation Channel and Breakwater Gap Upon Wave Propagation,U612.23
  14. Laboratory evaluation for usage of producing mud from reservoirs in SaBai area of Daqing oil field,X741
  15. Simulation Study and Application of the Submerged Entry Nozzles in Mold at Chonggang Slab Continuous Casters,TF341.6
  16. Preliminary Study on Forming Laws of Cuspidal Splitter Split-extruding Rectangular Slot,TG306
  17. Theory & Technology of Rock Mass Hydraulics in Coal Mining Above Aquifer,TD745
  18. Research on Void Evolution in Large Ingot during Hot Forging,O344
  19. Research on the Forming Process Simulation and Die Wear of Semi-Hot Temperature Range,TG301
  20. Mathematical and Physical Modeling of Supersonic Coherent Jet Behavior from Oxygen Lance for Converter Steelmaking,TF711

CLC: > Industrial Technology > Metallurgical Industry > Steelmaking > Ingot > Continuous cast steel,near net shape casting
© 2012 www.DissertationTopic.Net  Mobile