Dissertation > Excellent graduate degree dissertation topics show

Automobile Clutch Cover Assembly Detecting Machine Structural Error Analysis and Synthesis

Author: WangJuTao
Tutor: ZhaoLianYu
School: Tianjin University of Technology
Course: Mechanical and Electronic Engineering
Keywords: clutch test deformation finite element structure optimization
CLC: U467.4
Type: Master's thesis
Year: 2010
Downloads: 21
Quote: 1
Read: Download Dissertation

Abstract


Automobile clutch cover assembly detecting machine is a special-purpose equipment in automobile clutch industry, there isn’t mature approved product for the industry. It is not a general-purpose equipment, and the price of imported equipment is extremely expensive. But in order to ensure the quality of the clutch to avoid safe accident, the detecting equipment is necessary. Therefore, the research and development of high-performance, high-precision clutch cover detecting machine is the current market need and it has a high value in project application.The development of the detecting machine at domestic and abroad is described firstly with explanation of each characteristic. According to the technical requirements, various options and feasibility analysis are put forward to determine the form of the main structure. So the assembly drawings can be completed. And the paper provides the analysis of the possibility factors, which affect the machine testing accuracy. Component and part’s deformation are taken into account as priority. And besides, the relations between deformation and load are analyzed. ANSYS software is used to simulate and raise some optimization program or model, which will be re-analyzed in order to achieve the desired results. When the structural deformations are reduced, structure simplification and cost reduction are taken into account. With this comprehensive analysis, the guiding principles of structural improvement and optimization are given. This can achieve improving checked accuracy of the machine ultimately.According to the conclusion of this research, a testing machine was designed and manufactured. The machine satisfied the manufacturer requirements, and worked stably with high testing precision. This research achieves the expected results successfully.

Related Dissertations

  1. Research on the Mainframe System of Powder Mixed EDM and the Craft Experiment,TG661
  2. EDM Electrode Wear Mechanism and Control Research,TG661
  3. Research on the Structure and Characteristics of Permanent Magnetic Coupling,TH139
  4. Finite Element Analysis and Structure Optimal Design for Combined Seal at Normal Temperature and Low Temperature,TH136
  5. Simulation Analysis on Temperature Stress of RCC Arch Dam and Its Construction Joints Design Research,TV642.2
  6. Simplified Analysis of Semi-Rigid Steel Frames under Vertical Loading,TU391
  7. Based on Nonliner Finite Element Analysis of the Infilled Wall Frame Structure,TU323.5
  8. Stability Analysis of Roller Compacted Concrete Gravity Dam Based on Time-history Method,TV642.2
  9. Study on the Design and Biomechanical Behaviors of Individualized Artificial Knee Joint,R318.1
  10. Rock-fill Concrete Experiments on Comprehensive Properties and Studies on Thermal Stress,TU528
  11. Design of Testing Equipment for Electronic Products,TN06
  12. The Research of Technology for 3D Fashion Virtual Distortion and Display,TS941.26
  13. Solid Oxide Fuel Cell ferrite connect the material properties of,TM911.4
  14. S-lay Installation Analysis for Deepwater Pipeline,TE973
  15. The Research of Land-Use Optimization Approach Based on Non-Point Source Pollution Controlled,X24
  16. Research on Intelligent Aerial Bomb for Forest Fire Fighting,S762
  17. Multi-pin Internal Fixation of Calcaneal Fractures in Finite Element Analysis,R687.3
  18. The Analysis and Comparison of Adjacent Segment Degeneration of the Finite Element Caused by Three Posterior Lumbar Fusion Style,R687.3
  19. The Establishment and Preliminary Application of the Three-dimensional Finite Element Model of Ankle Joint,R687.3
  20. The Influence on the Dimensional Stability and Elastic Deformation Caused by Two Types of Disinfectant Solution to Different Impression Material,R783
  21. Different Bottom Structure of Dental Brackets Affect the Adhesiveness-Three Dimensional Finite-element Analysis,R783.5

CLC: > Transportation > Road transport > Automotive Engineering > Vehicle test > Parameters of the instruments and technology
© 2012 www.DissertationTopic.Net  Mobile