Dissertation > Excellent graduate degree dissertation topics show

Research and Application of High Efficiency Mining Technique of Fully Mechanized Top-Coal Caving with Large Mining Height in Deep Mine

Author: HuShanChao
Tutor: GuoZhongPing
School: Shandong University of Science and Technology
Course: Mining engineering
Keywords: fully mechanized top-coal caving mining large mining height numerical simulation overburden caving parameter
CLC: TD823
Type: Master's thesis
Year: 2011
Downloads: 128
Quote: 1
Read: Download Dissertation

Abstract


The feature of fully mechanized caving itself determines that caving coal process will inevitably lose some coal, so it has great significance to research of coal and rock caving law and coal caving technological parameters to improve caving coal recovery. Comprehensive research means including theoretical analysis, numerical simulation, similar material test and industrial experiment are used in this paper to study the overburden movement rules and caving coal technological parameters under the condition of fully mechanized caving mining.Through theoretical analysis, assessment methods and influencing factors influencing top coal caving property are obtained. UDEC is used to analyze the effect of different mining heights to the advance pressure in top coal and bottom coal, and the different mining height peak stress and position are obtained. Proper mining height is determined with the overburden stress behavior. Considering the peak stress and security support comprehensively, the reasonable mining height of the face is determined. Using the means of discrete element software to research overburden strata movement rules of top coal caving face, the existence of arch structure above goaf, and main roof in the arch structure forming transfer rock beam are confirmed. Through similar material experiment method, the coal rock caving and flowing laws are obtained. With the statistics of recovery and rate of gangue,0.8m is determined as the reasonable coal drawing pace. The caving effect of different caving methods is analyzed with the application of PFC2D soft, and the optimal caving method of one round caving in order is selected based on the results. A new method of improving recovery of top coal in primary mining is put forward. The industrial experiment is conducted in 1301N face with the research conclusions, and good production and social effects are obtained, which verifies the rationality of the research.

Related Dissertations

  1. The Setting Bases of Working Pressure in LNG Systems and Orthogonal Experiment Design of Heat Exchangers,TQ051.5
  2. Study on Springback of High-Strength Steel Stamping,TG386
  3. Numerical Simulation and Experiment on Hydroforming of Cups with Controllable Radial Pressure,TG386
  4. Research on Technology and Mechanism of Joining Cemented Carbide to Carbon Steel,TG454
  5. Numerical Simulation of Film Cooling in Turbine Cascade with Non-Axisymmetric Endwall Method,V231.3
  6. High Speed Aerodynamic Convection and Coupled Heat Transfer of Complicated Bodies,V215.4
  7. The Analysis on Characteris of Vibration Source about Vertical Vibration of Surrounding Environment Induced by Rail Transit,U211.3
  8. Study on the Heat Transfer Characteristics of Particle Cluster in Circulating Fluidized Bed,TK124
  9. Numerical Simulation of SNCR Process of a 600MW Utility Boiler,TK222
  10. Numerical Simulation of Biomass Direct Reburning,TK16
  11. Numerical Simulation on Pulverized Coal Combustion Process in a 670T/H Tangential Firing Furnace,TK224.11
  12. Numerical Simulation on the Combustion Process in the Furnace of a 1000MW Lignite-Fired USC Boiler,TK224.11
  13. Study on Gas-Solid Two-Phase Flow in Spouted Beds,TK173
  14. Experimental Study and Numerical Simulation on Aerodynamic Field of Tangential Bias Swirl Burner,TK223.23
  15. Characteristic Study of Combustion in Central Reverse Flame Chamber,TK223.21
  16. Numerical Simulation and Contrastive Analysis of Labyrinth Seals and Leaf Seals,TK263.2
  17. Numerical Study on Phosphorus Distribution in Water Environment of the Three Gorges Reservoir,X832
  18. The Design and Performance Simulation of External Valve Small Displacement Pump,TE933.3
  19. Analysis of the Impact of Tailings Dam Stability under Seepage Role,TV649
  20. Study on Hydraulic Fracturing of Low Permeability Reservoir,P618.13
  21. Numerical Simulation and Experimental Study of Air-Assisted Sprayer of Orchard,S491

CLC: > Industrial Technology > Mining Engineering > Mining > Coal mining > Underground mining methods
© 2012 www.DissertationTopic.Net  Mobile