Dissertation > Excellent graduate degree dissertation topics show

Studies on the Interaction of Ultra-short Laser with Transparent Medium

Author: ZhangZuo
Tutor: XuZhiZhan；SunZhenRong
School: East China Normal University
Course: Optics
Keywords: femtosecond laser micromachining damage threshold transparent medium fused silica Ti:Sapphire ultrashort laser pulse
CLC: TN24
Type: Master's thesis
Year: 2005
Downloads: 304
Quote: 4
Read: Download Dissertation

Abstract


The interactions of ultra-short lasers with transparent medium and femtosecond micromachining have been intensively studied with the rapid advances in laser technology, especially the chirper pulse amplification technique. In this dissertation, laser-induced damages mechanism in the transparent medium was systematically studied by femtosecond and picosecond laser. The main are as the following:1) We investigated the optical micrograph of laser-induced damage spots on the surface of the fused silica irradiated by femtosecond and picosecond laser pulses at different intensites, respectively. These results showed that femtosecond laser pulses was better than picosecond laser pulses for micro-machining, and highly reproducible microchannels in the fused silica could be built with the diameter of about 33um and the length of 22~254um with Tr.sapphire femtosecond laser, and it was found that the damage diameter, depth and volume increased with the laser intensity increasing.2) The absorption, fluorescence and XRD spectra of Ti: Sapphire were measured and analyzed, and the optical damage of Ti:saphire by femtosecond and picosecond laser pulses were investigated, respectively. It was found the surface and the stress in the crystal had effects on the damage morphology, and the damage mechanisms including the bulk damage and the surface damage, was discussed and analyzed.

Related Dissertations

  1. Stability of Polymer Monomer Bpa, 1,4-BD, TPA in Super/sub-critical Water,O631.3
  2. Research on a Novel Combined Fused Silica Cylinder Shell Vibrating Gyroscope,TH703
  3. Research on the Key Processing Factors That Influence the Machining of the Fused Silica with Reactive Atmospheric Pressure Plasma,TG664
  4. Research on Large-scale Fine Fused Silica Ceramic Rollers,TQ174.6
  5. Fused silica sub - surface defects induced laser damage FDTD,O441.4
  6. Low dielectric constant of fused silica ceramic materials,TQ174.1
  7. Research on Processing Technology of Fused Quartz Material with Atmospheric Plasma,TG664
  8. Preparation of fused silica ceramic technology and performance testing and characterization,TQ174.1
  9. CO_2 laser damage growth inhibition of fused silica,TN249
  10. Fused silica vacuum growth of injury and damage,TN249
  11. Fused Silica UV laser initial damage morphology,TN249
  12. Fused silica sub- surface scratches preliminary study of laser damage induced,TN249
  13. Sub- surface defects induced damage mechanisms and experimental research,TH744.5
  14. Study on Laser Induced Damage of Optical Thin Film Coatings and Damage Testing Using Scattering Light Techniques,O484
  15. High density of fused silica ceramic,TQ174
  16. Fabrication and Mechanical Properties of 2D-SiO2f/SiO2-BN Ceramic Matrix Composites,TB332
  17. Influence of Vitreous Silica and ρ-Al2O3 on the Performance of the Magnesian Slag Trap in Tundish,TG113.14
  18. Array of ultra-high pressure sensor manganese copper film studies,TP212
  19. Study on Mechanical Characteristics and Interferometric Sensoring Characteristics of Photonic Crystal Fibers,TN253
  20. Study on Properties of Alumino-silicate Castables for Burnt Stove Door,TQ522.15
  21. Femtosecond laser volume grating optical fiber sensors and new experimental study,TN253

CLC: > Industrial Technology > Radio electronics, telecommunications technology > Photonics technology,laser technology > Laser technology, the maser
© 2012 www.DissertationTopic.Net  Mobile