Dissertation > Excellent graduate degree dissertation topics show

Study on Thermoplastic Elastomor by Modifing Polyvinyl Chloride

Author: LiuZan
Tutor: ChenZhanXun
School: Qingdao University of Science and Technology
Course: Polymer Chemistry and Physics
Keywords: Thermoplastic elastomers PVC Polyvinyl alcohol copolymer Powdered nitrile
CLC: TQ334
Type: Master's thesis
Year: 2005
Downloads: 376
Quote: 1
Read: Download Dissertation

Abstract


This paper studied the PVC resin as the matrix , through rubber blending modified PVC thermoplastic elastomer prepared by the method of modified PVC preparing thermoplastic elastomers, this paper carried out to explore three systems : PVC / PVAF, PVC / PNBR and dynamically vulcanized PVC / PNBR. For PVC / PVAF system discussed PVC / PVAF the mass ratio of plasticizer used in conjunction with the quality and the performance impact . The results showed that , PVC / PVAF quality 80 /20 and 20/80 , the blends have better overall performance. 20 /80, the tensile strength up to 21.9MPa, tear strength of 67.SKN / m, permanent deformation of 18 %, 100 % elongation deformation rate of 5%. Kaolin better reinforcement , the tensile strength of 22MPa, tear strength of 68KN / m. Blending of PVC / PNBR system, research of PVC / PNBR the mass ratio of plasticizer quality , degree of polymerization of the polymer size, and filling properties of the blends . Experimental results show that , PVC / PNBR quality 70 / 30, the tensile strength of 10.7MPa, 390% elongation , tear strength 44.5KN / m. PVC high degree of polymerization system has high strength and elongation characteristics , silica-filled system 's overall performance is better. For PVC / PNBR dynamic vulcanization type system , the general amount of sulfur in 0.5phr, good mechanical properties of the system , with the use of accelerators can significantly improve the system 's overall performance. It was found that the dynamic vulcanization can significantly improve the overall performance of materials , such as tensile strength can be increased from 10.6MPa to 16.1MPa, increased by more than 50% , the elongation at break increased by more than 20%. After dynamically vulcanized PNBR of smaller particle size , can be more uniformly dispersed in the continuous phase . Through experiments , PVC / PNBR dynamically vulcanized blends type and static and dynamic heat resistance heat resistance are good. Scanning electron micrographs clearly show , PVC / PNBR system is a typical \The results show that the dynamic mechanical properties , PVC / PNBR system has better flexibility than PVC , better mechanical properties and lower the glass transition temperature, but PVC / PNBR the mechanical loss has increased .

Related Dissertations

  1. Imidazolium ionic liquids selective electrode and its research activity coefficient,O646
  2. Flexible PVC insulation composites based methods and properties of,TQ325.3
  3. Study on Preparation and Characterization of Polyvinyl Chloride Coated Polyester Multifilament,TQ342.2
  4. Basic Study on the Physical-Chemical and Pyrolysis-Incineration Characteristics of Typical Components in Medical Wastes,X799.3
  5. Predictive Control Method on PVC Stripping Process Based on SVM,TQ325.3
  6. Fenton oxidation in the production of PVC Wastewater Treatment Research,X703
  7. Pulp and Paper Pak Nai and PVC foam Composites,TQ325.3
  8. Zibo in Shandong Chemical Co. Ltd. 100, 000 Tons/Year of PVC Project Feasibility Study,TQ325.3
  9. Application of Plastic Products Automatic Production Line Based on PLC,TP278
  10. Experiment Research on Bearing Capacity Ability of Expansive Confined Concrete,TU398.9
  11. Methods of Testing and Evaluating PVC Recyclate,TQ325.3
  12. Research of Special Amines Modified Polyvinyl Chloride,TQ325.3
  13. Preparation of New Porous Hollow Fiber Membranes,TQ340.64
  14. Research on Remote Plasma Surface Modification and Antithrombogenicity of Medical PVC Film,R318.08
  15. Mechanical Properties and Aging Resistance of New High-impact Poly(Vinyl Chloride) Blends,TQ325.3
  16. Study on Wood-Plastic Pomposites Preparation by Wasted PVC Cable Sheath,TQ327
  17. Designing on Production Lines of Non-PVC Multilayer Infusion,TQ460.6
  18. Study on Formulation and Co-extrusion Technology for PVC Foamed Sheets with Double Layers,TQ325.3
  19. Research on Oily Water Treatment and Recycling Technique in the Low-Permeability Oilfields,X703.1
  20. A Study on the Structure and Properties of Poly(Vinly Chloride)/Wood Powder Composites,TQ325.3
  21. Study on the Effect of Pentaerythritol Ester and Its Zinc Salt As Thermal Stabilizers for PVC,TQ325.3

CLC: > Industrial Technology > Chemical Industry > Rubber Industry > Thermoplastic elastomers
© 2012 www.DissertationTopic.Net  Mobile