Dissertation > Excellent graduate degree dissertation topics show
Studies on Interfacial Electronic Structures of Transition Metal Oxide-based Intermediate Connectors in Tandem Organic Light-emitting Diodes
Author: BaoQinZuo
Tutor: LiYanQing;TangJianXin
School: Suzhou University
Course: Materials Science
Keywords: Transition metal oxide Intermediate connector Tandem OLED Energy level alignment
CLC: TN383.1
Type: Master's thesis
Year: 2011
Downloads: 81
Quote: 2
Read: Download Dissertation
Abstract
|
Tandem organic light-emitting diodes (OLEDs) have recently drawn considerable attention because of their superior current efficiency, luminance and operational lifetime compared to a conventional OLED. In a tandem OLED, multiple electroluminescent (EL) units are electrically connected in series via intermediate connectors. Under an applied electric field, the intermediate connector should be capable of charge generation, and be required to facilitate effective hole and electron injection into the adjoining EL unit. Therefore, the favorable intermediate connector is of critical importance for designing high-performance tandem OLEDs. For example, tandem structure with a transition metal oxide (TMO)-based intermediate connector has been used to achieve high-efficiency OLEDs due to TMO’s high work function, optical transparency and operational stability.In this thesis, the interfacial electronic structures and energy level alignments of TMO (WO3 and MoO3)-based intermediate connectors were studied via ultraviolet and X-ray photoemission spectroscopies (UPS and XPS), and their working mechanisms for charge carrier generation and injection process were also explored. In addition, the impact of constituent materials and structure on the performance of intermediate connectors were discussed. The details of research work are as following:(1) The interfacial electronic structures and energy level alignments of WO3-based intermediate connectors, including (a)NPB/WO3/Mg:Alq3, (b)NPB/WO3/Alq3, (c)NPB/Mg:Alq3 and (d)NPB/Alq3 were studied via UPS and XPS. The derived energy level alignments were applied to explore the working mechanism of WO3-based intermediate connectors and to explain the performance of these corresponding tandem OLEDs. Moreover, the function of the interlayer WO3 and Mg:Alq3 in the intermediate connector was analyzed. (2) The interfacial electronic structures and energy level alignments of MoO3-based intermediate connectors instead of WO3 were also studied via UPS and XPS. The related intermediate connectors were (a)NPB/MoO3/Mg:Bphen/Bphen, (b)NPB/MoO3/Bphen, (c)NPB/Mg:Bphen and (d)NPB/Bphen. It was found that MoO3-based intermediate connectors had the same working mechanism with that of WO3-based intermediate connectors. Next, to investigate the impact of electron transport material (ETM) on the functional effectiveness of TMO-based intermediate connector, Alq3 was used as ETM instead of Bphen. The conclusion revealed that the NPB/TMO/Mg:ETL/ETL is a high-performance intermediate connector.(3) On the basis of Mg:ETL/TMO, the intermediate connectors with double-doped structure, MoO3:NPB/Cs2CO3:Bphen and MoO3:NPB/MoO3/Cs2CO3:Bphen, were studied via UPS and XPS. According to their energy level alignments, the corresponding intermediate connectors can generate carrier charge and inject into the neighboring EL unit more effectively, compared to the Mg:ETL/TMO intermediate connector.(4) Inverted device and double-insulated devices with TMO intermediate were fabricated, and their IV and capacitance properties were characterized, respectively. On the basis of the experimental result, the thermal stimulation model for TMO-based intermediate connectors was proposed.Finally, we preliminarily explored the function of TMO in the middle electrode of tandem solar cell.
|
Related Dissertations
- Structure and Property of Transitional Metal Oxides Substituted-Cordierite Infrared Radiation Materials,TU561.61
- Soft Chemical Synthesis and Characterization of Transition Metal Oxide Nanocrystals,TB383.1
- Electrochemical Characterization of Three Dimensional Nanofibers Electrode Fabricated by Electrospinning,TB383.1
- Light attenuation of the organic / inorganic surfaces, interfaces, and organic light emitting devices,TN383.1
- Mesoporous transition metal oxides Controllable Preparation and Catalytic Activity,O643.3
- Study on Li~+ Extra Transition Metal Oxide Cathode Materials for Lithium Ion Cell,TM912
- Complexes of transition metal oxides and oxygen cryogenic matrix isolation infrared spectroscopy and theoretical calculations of,O641.4
- Preparation and Physicochemical Properties of Mesoporous Metal Oxides MO_x (M=Cr, Fe, Co, Sm, Eu),O643.36
- Study on the Catalytic Effect of Transition Metal Oxides on the Thermal Decomposition of Ammonium Perchlorate,O643.32
- Preparation and Catalysis of Supported Nano Iron-based Catalyst for Water-gas Shift Reaction,O643.3
- Transition metal oxide crystals materials preparation method,TB383.1
- Photochromic materials New Progress,TB34
- Effect of Transition Metal Oxides and Chemical Bleaching Process on the Whiteness of Kaolins,TD985
- Preparation and Properties for the Energy-saving Infrared Radiant Coatings,TQ630.7
- Iron / cobalt oxide ion and Theoretical Study of the Reaction Mechanism of propane,O643.12
- Study on Composition and Properties of Boron-fluorine-free Fiberglass,TQ171.1
- Electrochemical synthesis of nano- grinding transition metals and transition metal oxide electrochemical performance of,TM912
- Microwave-assisted Solution-based Synthesis of Transition Metal Oxides and Characeterization,TB383.1
- Interfacial Electronic Structures in Organic Photovoltaic Cells,TM914.4
- Matrix Isolation Infrared Spectroscopic and Theoretical Study of Noble Gas-Transition Metal Oxide Complexes,O641.4
- Dehydrogenation of Ethylbenzene to Styrene in the Presence of Carbon Dioxide,TQ241
CLC: > Industrial Technology > Radio electronics, telecommunications technology > Semiconductor technology > Light-emitting devices >
© 2012 www.DissertationTopic.Net Mobile
|