Dissertation > Excellent graduate degree dissertation topics show

Study on Large Pressure Sprayer Used in MAP Production

Author: HuLin
Tutor: LiuZhongHai
School: Sichuan University
Course: Chemical Engineering
Keywords: atomization pressure sprayer abrasion mechanism erosion corrosion synergistic mechanism
CLC: TQ440.5
Type: Master's thesis
Year: 2005
Downloads: 117
Quote: 1
Read: Download Dissertation

Abstract


This paper studies the effect of separation factor to the sprayer abrasion process, the erosion-corrosion mechanism of the sprayer material and the atomization effect systematically. Based on those studies, improved structural design parameters and material have been suggested and adopted on new commercial sprayers and much longer life has been achieved with good atomization quality and satisfactory yield.In this paper, a new design of large pressure sprayer used in MAP production is provided, a modified Doumas equation for improved large pressure sprayers is deduced and then, new material, YT15 and SiC that have never been used in MAP production are used to make the sprayers. On site test in the factory are carried out to check the new sprayers’ life and study the factors of atomization effect. Through the experiments in the lab and SEM studies, the abrasion mechanism of the materials is studied systematically and the abrasion mechanism is deduced. The relationship between the discharge coefficient and design parameters, the yield and the sprayer structure, the sprayer structure and abrasion are discussed. Furthermore, improving direction in the future is suggested.Study results indicate that it is necessary to reduce the trend of solid particles to closing the sprayer wall, namely reduce the separation factor. For large pressure sprayers used in MAP production, the abrasion resistance of materials are SiC>YT15>YG6X>YG8. The material abrasion mechanisms of large pressure sprayers are as follows: ① For cemented carbides, the first step is the wipe of the felt metals, then is the wipe of the carbide particles. In this process, there is thesynergistic mechanism of erosion and corrosion, the corrosion speeds the erosion up and the synergistic effect is one of the most important reasons of fast material loses. At the same time, the wide size distribution of the carbide particles and the pores appeared in the material are also the reason of fast material loses. (2) For ceramics, the higher the hardness, the lower the rate of erosion. For ceramics, the denser the material and the smaller the particles, the higher the erosion resistance of the material.

Related Dissertations

  1. Preparation of Micro-Arc Oxidation Ceramic Coating on Mg Alloy and the Research of Galvanic Corrosion,TG174.453
  2. Lifetime Prediction and Channel Wall Erosion Accelerate Test of Hall Thruster,V439.2
  3. Effect of Soil Erosion on Soil Quality in the Cultivated Slope Land on the Loess Plateau, China,S157.1
  4. Lijiang River,RS and GIS - based Soil Erosion Research,S157
  5. Research on Rainfall Erosivity in Jiangsu Province,S157.1
  6. Anti-corrosion Property of Flake Zinc Epoxy Coating Doped with Rare Earth in SRB,TQ630.1
  7. Temperature and Pressure Drop Analysis and Its Application in CO2 Corrosion Evaluation of Subsea Pipeline,TE832
  8. Research on Electrochemical Synthesis and Application of Conductive Polyaniline,O633.21
  9. Investigate of Chromate Conversion Coatings on Aluminum Alloy,TG174.4
  10. Study of the Preparation and Properties of the Trivalent Chromium Black Passivation with Non-cobalt Sulfate System,TG174.4
  11. Study on Chemical Coloring and Sealing Processing of Stainless Steel,TG177
  12. The Development and Corrosion Resistance of Chromium Electroplating Sealing Agent,TG174.42
  13. Preparation and Properties of Reactive Thermal Sprayed Ternary Boride Cermet Coatings,TG174.4
  14. Study on Preparation Technology and Properties of Al2O3-TiB2 Solid-state Reaction Multiphase Ceramic Coating on AZ31B Alloy,TG174.44
  15. Synthesis and Performance Study of Novel Fluorine-containing Epoxy Vinyl Ester Resin,TQ323.5
  16. Prepaation of Hybrid Membrane on Carbon Steel and Anti-corrosion Properties Research,TG174.4
  17. The Comparative Study on Ni-P and Ni-Ce/W-P Electroless Plating and Coating Performance on 27SiMn Steel,TQ153.12
  18. The Effect of Rare Earth Additive on the Structure and Property of the Steel for 25crmoa Sucker Rods,TG142.13
  19. Electroless Ni-Pon the Bulk Nanocrystalline Ingot Iron,TQ153.1
  20. Study on Corrosion Resistance and Condensation Property of Ni-P/Nano SiO2 Composite Coatings,TG174.4
  21. Studies on Hard Films of Stainless Steel by Magnetron Sputtering,TG174.44

CLC: > Industrial Technology > Chemical Industry > The chemical fertilizer industry > General issues > Machinery and equipment
© 2012 www.DissertationTopic.Net  Mobile