Dissertation > Excellent graduate degree dissertation topics show

Numerical Simulation of Huck Series Fastener Mechanics Action in Heavy Load Wagon

Author: WangYong
Tutor: MiXiaoZhen
School: Dalian Jiaotong University
Course: Materials Processing Engineering
Keywords: The Huck Series connector Finite Element Elastic-plastic Numerical simulation
CLC: U272
Type: Master's thesis
Year: 2005
Downloads: 52
Quote: 0
Read: Download Dissertation

Abstract


In order to improve the capacity of China's railway transport , freight trains have been in the direction of the \With the load capacity increases , the use of aluminum to reduce vehicle weight of steel and aluminum hybrid structure of heavy vehicles came into being. With increasing deadweight between the various components of the trucks bear the load also increases, which put forward higher requirements for the connection overloaded truck parts . Plate connection method commonly used in modern industrial production , riveting , screw , spot welding . But these connections because of their own shortcomings and limitations , can not meet the requirements of overloaded trucks , and therefore need to adopt a new connection . The Huck 's connector plastic deformation plate closely, able to meet the requirements of heavy trucks , has been a large number of applications . However, the size and scope of design when used because after the installation is complete connector connecting portion generated residual stress , pressure -affected zone is not clear , it is difficult to determine the number and distribution of Huck series connector installation in order to ensure security of the connection , use only the Multiple connectors, resulting in unnecessary waste . In addition, the plate allowable stress , vehicle plate not only by the stress imposed by the outside world , but also by the residual stress of the Huck series connectors . Sheet must be used to meet the sum of the externally imposed stress and residual stress is less than the allowable stress . Do not know the size of the residual stress connected to the rear panel , is bound to impact on the design of vehicle reliability . In order to solve the above problems , based on non-linear finite element software MARC Huck series connectors commonly used BOM and C50L connector Numerical Simulation of the mechanical behavior . Modeling technology to create the elastic-plastic model based on the contact . The results of numerical simulation reveals both the connector plastic molding law provides a numerical basis , not only to determine the connector pressure coverage is also overloaded trucks scientifically Huck Series connector provides an important reference .

Related Dissertations

  1. The Setting Bases of Working Pressure in LNG Systems and Orthogonal Experiment Design of Heat Exchangers,TQ051.5
  2. Research on the Mainframe System of Powder Mixed EDM and the Craft Experiment,TG661
  3. Study on Springback of High-Strength Steel Stamping,TG386
  4. Numerical Simulation and Experiment on Hydroforming of Cups with Controllable Radial Pressure,TG386
  5. Research on Technology and Mechanism of Joining Cemented Carbide to Carbon Steel,TG454
  6. EDM Electrode Wear Mechanism and Control Research,TG661
  7. Research on the Structure and Characteristics of Permanent Magnetic Coupling,TH139
  8. Finite Element Analysis and Structure Optimal Design for Combined Seal at Normal Temperature and Low Temperature,TH136
  9. Numerical Simulation of Film Cooling in Turbine Cascade with Non-Axisymmetric Endwall Method,V231.3
  10. High Speed Aerodynamic Convection and Coupled Heat Transfer of Complicated Bodies,V215.4
  11. The Analysis on Characteris of Vibration Source about Vertical Vibration of Surrounding Environment Induced by Rail Transit,U211.3
  12. Simulation Analysis on Temperature Stress of RCC Arch Dam and Its Construction Joints Design Research,TV642.2
  13. Simplified Analysis of Semi-Rigid Steel Frames under Vertical Loading,TU391
  14. Based on Nonliner Finite Element Analysis of the Infilled Wall Frame Structure,TU323.5
  15. Study on the Heat Transfer Characteristics of Particle Cluster in Circulating Fluidized Bed,TK124
  16. Numerical Simulation of SNCR Process of a 600MW Utility Boiler,TK222
  17. Numerical Simulation of Biomass Direct Reburning,TK16
  18. Numerical Simulation on Pulverized Coal Combustion Process in a 670T/H Tangential Firing Furnace,TK224.11
  19. Numerical Simulation on the Combustion Process in the Furnace of a 1000MW Lignite-Fired USC Boiler,TK224.11
  20. Study on Gas-Solid Two-Phase Flow in Spouted Beds,TK173
  21. Experimental Study and Numerical Simulation on Aerodynamic Field of Tangential Bias Swirl Burner,TK223.23

CLC: > Transportation > Rail transport > Vehicle Engineering > Truck
© 2012 www.DissertationTopic.Net  Mobile