Dissertation > Excellent graduate degree dissertation topics show

Study on the Process and Properties of Electroless Deposition La-Co-P Magnetic Alloy Film

Author: DiJinFang
Tutor: WangJianChao
School: Qinghai Normal
Course: Inorganic Chemistry
Keywords: chemical plating rare earth element magnetic alloy performance study
CLC: TQ153.2
Type: Master's thesis
Year: 2011
Downloads: 27
Quote: 0
Read: Download Dissertation

Abstract


The chemical plating, as a new kind of treatment technique on metal surface, has advantages, for instance, plating evenly, electroless, simple technology and costless, is used widely. The chemical plating become a new tend in the fields, as to it can raise the corrosion-resistance and working life of product in the protective properties and improve magnetic, wear resistance and hardness of product in functional aspect. Alloy film with rare earth elements joined has excellent properties. In this thesis, La-Co-P alloy films were prepared by chemical plating. Formation, microcosmic topography and composition were analyzed, and the electrochemical mechanism was studied.Introduction and experiment are mainly parts in this thesis. The chemical plating, properties and application of the rare-earth elements, current situation and research purpose were discussed in introduction; Technology, the electrochemical mechanism, microcosmic and composition of La-Co-P magnetic alloy film were researched in experiment; thesis is summarized in the last chapter.Experiment procedure and test methods were introduced in chapter two.Technology and electrochemical mechanism were studied in chapter three. The best plating solution recipe of La-Co-P magnetic alloy film was acquired by orthogonal test (L16(44)). Effect of factors on plating velocity and Co contents were discussed. LK2005 electrochemical workstation was used to study the cathodic polarization and CV curve about La-Co-P alloy film. Electrochemical mechanism was explained by Ep,ip,deposition potential and polarizability. Results show the right quantity of the composition of plating solution is beneficial for deposition.Formation, microcosmic topography and composition of La-Co-P magnetic alloy film are studied in chapter four. Research show by EDS, mass percent of La in alloy film increase with La(NO3)3 concentration improved in plating solution. Results show by SEM, crystalloid of alloy film is wee and evenly. The corrosion-resistance of film measured by two methods. One is soaking experiment, another is electrochemical experiment, the later mainly tested the anodic polarization and taffy curve. Results show corrosion-resistance of film improved with La(NO3)3 concentration improved in plating solution. Results show by VSM, magnetic property improved with percent of La in alloy increased.

Related Dissertations

  1. Biological Effect of Rare Earth Element and Genetic Transformation on Arnebia Euchroma(Royle) Johnst.Cell,S567.239
  2. Performance Study and Structural Optimization on Heat Exchanger with Helical Baffles,TK172
  3. Study on the Prepration and Performance of Electrode Catalyst for Low Temperature Fuel Cell,TM911.4
  4. Recrystallized and Structure Conversed Study of Re Heavy Rail Steel in the Course of Hot Rolling,TG111.7
  5. Effects of Cofactor and Episomal Plasmids on the Production of Vitamine C,TQ466.3
  6. Preparation of Three Stationary Phases in High Temperature Gas Chromatography and Their Chromatographic Performance Evaluation,O657.7
  7. The Surface Treatment on the LaMg2Ni2.7Co2.1Mn2.7Cu1.5 Hydrogen Storage Alloy and There Electrochemical Properties,TG139.7
  8. Study on Irradiation Effects of Iron-Based Soft Magnetic Alloys,TG132.271
  9. Research on the Processing and Properties of the Rare-earth Y Element-C194 Alloy,TG146.11
  10. Effect of Laser Irradiation and External Magnetic Field on Microstructure and Properties of Fe-Cr-Co Alloy,TM273
  11. AZ31 magnesium alloy direct electroless nickel-phosphorus alloy,TG174.44
  12. The Influence of Magnetic Properties Caused by Non Magnetic Metal Materials Located in the Magnetic Circuit,TH133.3
  13. Preparation and Properties of Chitosan-based Wound-dressing,R318.08
  14. An Investigation on the Preparation and Performance of the RE-Mg-Ni Based AB3.8 System Hydrogen Storage Alloys,TG139.7
  15. C, O impurities , grain size and heat treatment cooling metal injection molding Fe-50% Ni alloy magnetic,TF124.3
  16. Preparation and Characterization of Nano Ce-TiO2 Films on Different Supporters,TB383.2
  17. Surface Treatment of Magnesium Alloy with High Strength and Toughness,TG174.4
  18. High Frequency and Broadband EMI Supression Material,TB34
  19. Effects of Rare Earth Elements on Microstructure and Conductivity of Pure Copper,TG146.11
  20. The Study on the Thermal Properties and Corrosion Resistance of Vacuum Sintering Ni-based Cermet Composite Coating with Rare Earth Joined,TG174.4

CLC: > Industrial Technology > Chemical Industry > Electrochemical industries > Electroplating industry > Alloy plating
© 2012 www.DissertationTopic.Net  Mobile