Dissertation > Excellent graduate degree dissertation topics show

Study on Wearable System with a Monitoring Function

Author: HeFuXiang
Tutor: RenLiHong
School: Donghua University
Course: Pattern Recognition and Intelligent Systems
Keywords: intelligent garment RFID CAN bus identification GSM/GPS
CLC: TP277
Type: Master's thesis
Year: 2010
Downloads: 115
Quote: 0
Read: Download Dissertation

Abstract


Intelligent Clothing as a new care carrier has taken more and more attention, even past medical care model concepts are gradually changed as the new technology developed. Hostpital care as the center was changed to the object as the center, and on-duty monitoring gradually change to the intelligent unmanned monitor.Therefore, this paper analysist the requirements of the system, and designed a wearable monitoring system for the elderly people with the intelligent clothing as the background that combined with RFID and CAN bus technology. On the basis of the specific implementation method that variety of the related devices and wireless communications such as field bus, recongnition technology, we present a GPS-GSM-Field Bus network architecture.The design of the system requirements are divided into two modules, identification module and position module, identification module is mainly used to assist user in the district tralling. Positioning moduel is mainly used to provide position information for the friends or his guardians. First, according to the chatacteristics of the identity module, we combined with RFID and field bus technology, design the hardware structures using AT89C52 as the central processor, and design a RS232/CAN converter structure for different network structures, and on this basis, the main peripheral circuit designed.Then, the whole identification system is divided into three major modules according to the hardware design, monitoring system, CAN communication network and RFID reader. Wearable monitoring guardian of the clothing contains the identity id, card ID, contacts and other health care information. RFID reader constitutes the next crew of the identity, responsible for reading the card and sending the control signals to the upper, while accepting the host computer instructions. CAN bus is composed the nodes that responsible for the communication of the information.Finally, for the GPS-GSM-Field bus of the wearable network that proposed at the begin of the paper, according to the characteristic of GPS system for intelligent garment, this paper presents a strategy of GPS data processing by removing redundant information and shifting the combination codes. Its compressed result is analyzed by comparing with direct data compression and Huffman coding. At the same time we complete its wireless data transmission.This paper is designed to provided a new perspective for smart clothing applied research related through RFID, GSM and Bus technology, expand the scope of smart clothing and Solve some practical problems of living.

Related Dissertations

  1. Development of GJB1188A Bus Signal Monitoring and Recording Device,V248.2
  2. Temperature Drift Modeling and Compensation of Fiber-Optic Gyroscopes,V241.5
  3. The Design and Optimization of Locomotive Signal Testing System Based on ARM9,U284.91
  4. Study on the Locomotive Dynamic Supervision System,U284.48
  5. The Inductive Load Based Vehicle Body Network Control System,U463.6
  6. The Study of Control Algorithm for Automotive Power Window Based on Lin Bus,U463.6
  7. Simulation and Analysis about Switched Reluctance Generator Power Supply System,TM31
  8. Research on Vector Control System of Induction Motor Based on DSP,TM346
  9. Research on Induction Motor Vector Control System Adapting Multi-Bus Communication Mode,TM346
  10. Compensation Methods of Different Speech Coding for Speaker Recognition,TN912.34
  11. Research on High-Performance Computer I/O Bus,TP336
  12. The Software Component Modeling Method Based on Feature and Its Application in VMI Management System,TP311.52
  13. Study on RFID Techniques in the Manufacture of Used in Automobile Ignition Coils,TP391.44
  14. Research on the Control and Remedy of Nanopositioning Stage Drived by Piezo Material Lead Zirconate Titanate,TP273
  15. The Study on Rhinoceros Horn and Its Imitation,TS932.2
  16. Animal products quality safety and security regulation of RFID systems,TS201.6
  17. Studies on the Methodology for Resistance Identification of Rice Cultivar to Rice Black-Streaked Dwarf Disease and the Susceptible Growth Stages of Rice to Rbsdv,S435.111.4
  18. Isolation and Identification of Photosynthetic Bacteria and Preliminary Study of Proteinase Secreted from Rubrivivax Gelationsus,Q93
  19. F enterprises with RFID data capture products to improve i Research and Application,TP274.2
  20. CAN bus technology in the meteorological monitoring System Research and Implementation,P409
  21. Study on Risk Identification and Evaluation of Manufacturing Green Products R & D,F205;F224

CLC: > Industrial Technology > Automation technology,computer technology > Automation technology and equipment > Automation systems > Monitoring, alarm,fault diagnosis system
© 2012 www.DissertationTopic.Net  Mobile