Dissertation > Excellent graduate degree dissertation topics show

Fabrication of Limiting-current Type Oxygen Sensors by a Technology of Multilayered Lamination

Author: ShenJie
Tutor: JianJiaWen
School: Ningbo University
Course: Communication and Information System
Keywords: limiting current oxygen sensor multilayered cofiring AC impedance
CLC: TP212
Type: Master's thesis
Year: 2009
Downloads: 155
Quote: 0
Read: Download Dissertation

Abstract


Solid electrolyte oxygen sensor has been popularly used in automotive industry and planar limiting-current oxygen sensor is valued for its characters of high precision, quick response, durability and no reference air, which make up the core component of oxygen device. According to the relevant research at home and abroad, the oxygen sensor was studied from the aspects of Solid electrolyte material, structural design, screen printing, stacking hot pressing and sintering process. Further more, the signals of sensor were detected in detail.In the experiment, 5mol% yttrium stabilized zirconia ceramics and 8mol% yttrium stabilized zirconia ceramics, which had been sintered, were investigated by shrinkage rate, thermal expansion instrument, digital microscope and AC impedance. Furtherly the resistance of Grain boundary and resistance of Grain were calculated by the AC impedance spectroscopy below 550℃. Meanwhile, activation energy of grain and Grain boundary were gained in the fitting curve of Arrhenius.A thin-film limiting-current type oxygen sensor using 5mol% yttrium stabilized zirconia (5YSZ) was developed successfully through the technology of tape casting. It was made from tape-casting layers by screen printing, stacking hot pressing and multilayered cofiring process. Meanwhile the physical characteristics were investigated by SEM and digital microscope. The response time and I-V curve of oxygen sensor sample were tested at 923K in a mixture of the N2-O2 with the oxygen concentration between 1100ppm and 90%. Further more, the influence of the ambient pressure and the temperature of solid electrolyte were also developed. Finally, two test systems of oxygen sensors were introduced with their different applications in detection. The result distinctly shows that stable current platforms of the sensor prepared by multilayered cofiring are formed in the scope of the oxygen concentration mentioned previously, and a good linear relationship between the limiting current and oxygen concentration is illustrated according to Normal diffusion model; Simultaneously it is indicated that the sensor has good repeatability at 923K with the oxygen concentration varying from 5.06% to 21.24% and the response time is within 1 second,which is able to meet the need of basic application in oxygen detection.

Related Dissertations

  1. The Study on the Electrical and Optical Properties of Sm3+ Doped CeO2 Ion Conductor with Different Dopant Concentration,TM911.4
  2. Synthesis and Properties of Polymeric Dissolved Oxygen Sensor Based on Porphyrin Unit,TP212.2
  3. Compatibility Study of Interface between Na~+ Conductive Ceramic and Na,TQ174.1
  4. Research on Rapid Corrosion Meter Based on Electrochemical Impedance Principle,TG174.3
  5. Resistant chromium poisoning , high-performance solid oxide fuel cell cathode materials research,TM911.4
  6. Research on the Dielectric Properties of La2-xSrxNiO4-δ,TM215
  7. Research on Preparation of Miniature Ceramic Heater,TB657.5
  8. Preparation and Characteristic of Sol-gel Oxygen Sensing Thin Film,TB43
  9. MIC to do with limiting current density diffusion layer of the oxygen sensor,TP212.2
  10. Testing Data Analysis System for Dissolved Oxygen in Water Based on Grails, Spring Framework and Hibernate,X832
  11. The copper electrowinning new lead-based alloy anode Preparation and properties of,TF811
  12. Study on Preparation and Performance of Polypyrrole/Carbon Nanotube Composites,TB383.1
  13. The Study of Closed-loop Control Strategy for FAI Motorcycle,U483
  14. Study on the Preparation of Yttria Stabilized Zirconia Nanoparticles and Its Oxygen Sensing Properties,TB383.3
  15. Multi-Channel Zirconia Oxygen Analyzer,TH83
  16. Study on Thick-film Oxygen Sensor of SrTiO3,TP212
  17. Synthesis and Electrical Properties of (La1-xSrx)2(Mo1-yMy)2O9-α(M=Al3+,Sc3+) and YSZ,TM911.4
  18. Study on the Preparation of ZrO2（MgO） Solid Electrolyte Powder,O614.412
  19. Study on Control of Oxygen in Environment Simulation Chamber,TP273
  20. The Prepration of Solid Electrolyte in Planer Oxygen Sensor of Automobile and the Research of Its Water Aging,TQ174.1
  21. Numerical Analysis of Thermal Structure Fields for Cold Start of Oxygen Sensor on Finite Element,TP212

CLC: > Industrial Technology > Automation technology,computer technology > Automation technology and equipment > Automation components,parts > Transmitter ( converter),the sensor
© 2012 www.DissertationTopic.Net  Mobile