Study on Optimum Design of Tank Washing System Heated with Thermal Oil

Abstract

Related Dissertations

1. The Design Calculation and Numerical Simulation of 300MW Unit Low Pressure Heater,TK223.528
2. Major component characteristics of the web opening degree Kong Houqiang,U661.43
3. Analyzing for Couping Feature and Optimization for the Complex Product Configuration Model and Its Application in High-End CNC Industry,TG659
4. Applied Research of Numerical Simulation Method for Gas Flow Distribution of Straight-through Bag Filter,X701.2
5. Study on the Hydraulic Characteristics at the Side Inlet/outlet of the Upper Reservoir of Pumped Storage Plant,TV743
6. Numerical Simulation on Three Dimensional Heat Transfer and Flow of Supercritical Hydrocarbon Fuel,TK124
7. The Numerical Simulation and Analysis of Air-distribution in Big Air-Conditioning Room,TU831
8. Theoretical and Experimental Cycle Performance of Natural Working Fluids for Moderate/High Temperature Heat Pump,TK115
9. A Bi-Level Programming Model for Vehicle Allocation of Bus Lines (Network),U492.2
10. Fluid Flow Distribution in Plate-Fin Heat Exchangers,TK172
11. Research and Application of blast furnace surface area temperature characteristics of intelligent extraction method,TF53
12. The Sutdy on Performance of Sprinkling Plate Heat Exchanger in Sewage-Source Heat Pump System,X505
13. Numerical Simulation and Optimization of Bend-Type Ice Removal in the Diversion Water Channel of Powerhouse,TV133
14. Calculation and Research for Roller Pressure of Roller Mills,TQ172.63
15. A typical cable-stayed steel box girder longitudinal rib stiffeners Design Method,U448.213
16. Research and Design of the Terminal-Intigration Origainted Network Session Control and Key Service Engines,TN915.09
17. The Analysis of Excavator Working Device Hydraulic System,TU621
18. Study on the Impact about Flow Distribution Method to the Reliability and Economic of the Pipeline Network,TU991.33
19. Multi- drum inside the extraction parameters of the drum openings,TQ051.8
20. Parameter optimization of plate heat exchanger and heat transfer performance of,TK172
21. Research on Strength Failure Design for Compliant Mechanisms with Topology Optimization,TH112