Dissertation > Excellent graduate degree dissertation topics show

Research on the Equipment and Technology of Compact Spinning

Author: LiuLinBing
Tutor: GaoWeiDongï¼›XieChunPing
School: Jiangnan University
Course: Textile Engineering
Keywords: Compact Spinning Hairiness Spinning Triangular Space Structure Lattice Apron
CLC: TS103.33
Type: Master's thesis
Year: 2005
Downloads: 135
Quote: 3
Read: Download Dissertation

Abstract


Compact spinning is a new technique developed to reduce the hairiness ofyarn. Compact spinning technique makes drafting,compacting and twistingseparated adopting compact set. Compact spinning can reduce spinningtriangular space to minimum,decrease yarn hairiness,improve yarn breakstrength and break elongation ,improve the resultant yarn quality. Theprinciple of compact spinning technique and the structure of compact spinningsystems are introduced. According to different compact methods, the compactspinning systems are classified. The systems are separated with air-compactand airless-compact spinning systems, and air-compact spinning systems areseparated with roller-compact, leather roller-compact, apron-compact andlattice apron-compact systems. At the meantime, the performance andcharacteristic of compact spinning systems are analyzed and compared.An actual compact spinning system is made according to EJM128K spinningframe. Spinning experiments are carried out to discuss compact spinningtechnology. Based on experiments, we have some conclusion.The self-made compact spinning system belongs to air-compact spinningsystem, it can reduce spinning triangular space to minimum,decrease yarnhairiness, especially long hairiness. The compact effect and resultant yarnquality are affected by draft multiple, air negative pressure and nip linepressure. Draft multiple should be in the range of 1.01 to 1.07. Suctionpressure should be in the range of 80 mm to 90 mm hydraulic pressure. The yarncrosses the nip line of block roller and is twisted. The pressure of nip shouldrange from 70 N to 80 N. Adopting air guide palte can improve the utility ofair flow and strong compact effect.

Related Dissertations

  1. Synthesis, Structure and Properties of PBO/SWNT Composite Fibres,TQ340.64
  2. Hydrothermal Synthesis of Oxide Hollow Spheres,TB383.4
  3. Research on the Mainframe System of Powder Mixed EDM and the Craft Experiment,TG661
  4. Investigations of Structure and Glass Forming Abilty of Amorphous Alloys,TG139.8
  5. Technology of Filling Clearance and Optimizing the Bonds during Ultrasonic Brazing,TG454
  6. Research on the Structure and Characteristics of Permanent Magnetic Coupling,TH139
  7. Finite Element Analysis and Structure Optimal Design for Combined Seal at Normal Temperature and Low Temperature,TH136
  8. The Study on Structural Calculation and Analysis Method of Lattice-type Crane with Variable Cross-section Boom,TH21
  9. Based on Nonliner Finite Element Analysis of the Infilled Wall Frame Structure,TU323.5
  10. Influence of over Fired Air on Gas-Solid Flows in a W-Shaped Flame Boiler,TK229
  11. Simulation Research on Compound-Structure Permanent-Magnet Synchronous Machine System Used in Hybrid Electric Vehicles,TM341
  12. Research on an Axial/Radial-Axial Flux Compound-Structure Permanent-Magnet Synchronous Machine Used for Hybrid Electric Vehicle,TM341
  13. Hong'an dialect syntax research,H146
  14. Adjust the structure of higher education in Yunnan Strategy Study,G649.2
  15. Research on Stability of Hierarchical Sattellite Network,TN927.23
  16. Research on Autamatic Music Structrue Analysis,TN912.3
  17. Research and Design of High Layer Protocol in DMR Trunking System,TN929.52
  18. Research on Structure Transition Technology for SMT,TP391.2
  19. Research on Attitude Control Law of Endo-Atmospheric Missile,TJ765.23
  20. Study on Nonlinear Variable Structure Guidance Law,TJ765
  21. Sliding Mode Variable Tructure Control for Separating-Mirror System and Inhibit Chattering,TP273

CLC: > Industrial Technology > Light industry,handicrafts > Textile industry,dyeing and finishing industry > General issues > Textile industry machinery and equipment > Weaving equipment > Loom
© 2012 www.DissertationTopic.Net  Mobile