Dissertation 

About 1081 item dissertation in line with Finite element simulation query results,the following is 301 to 350(Search took 0.029 seconds)

  1. Finite Element Simulation of Roll Forging for the Automobile Rear Axle Housing and Semi-axle Shaft Sleeve,ZhiFuZuo/Jilin University,0/53
  2. Head Face Throat Defect of Round Billet Large Forgings during Stretching Process,ZhangZhenChao/Yanshan University,0/51
  3. Optimizing and Die Life Prediction of Hot Forging Die Based on Wear,ChenKeWei/Chongqing University,0/210
  4. Roll Forming Simulation of Variable Section Beam,YaoKai/North China University of,0/10
  5. Metal Strip Disc Blade Slitting Fracture Analysis and Slitting Process Numerical Simulation,HuangJia/Guangdong University of Technology,1/83
  6. The vibrational rotary forging force detection compaction experiment based on,ZhaoXiaoHui/Jiangxi University of Technology,0/25
  7. Research on Constrained Groove Pressing of Pure Al/Cu Sheet,LiangPing/Shandong University,0/27
  8. Research on Stretch Bending Forming Process for Large Curvature Profile by Numerical Simulation,ZhangZuo/Jilin University,0/61
  9. Research on the Technology and CAPP System for Foming the Large Diameter Longitudinal-seam Submerged ARC Welded Pipes with JCOE Process,QuXiaoYang/Yanshan University,0/90
  10. Key Factors Numerical Analysis of Ultra-high-strength Boron Steel Hot Stamping,FanGuoWen/Jilin University,0/105
  11. Finite Element Simulation and Experiment of Tensile Properties of Q235,ZhangLei/Jilin University,0/394
  12. Study on the Best Strain Rate Superplasticity and Application of TA15Titanium Alloy,ChenXiaoJie/Nanchang University of Aeronautics and,0/99
  13. Experiment and Finite Element Analysis on Micro Hot Embossing Process of Zr-based Amorphous Alloy,ZhengXia/Huazhong University of Science and Technology,0/25
  14. The Deformation of Vit1Bulk Metallic Glass under High Pressure Torsion,LiNaiPeng/Yanshan University,0/32
  15. The Research on Manufacturing and Mechanical Properties of GH99High Temperature Alloy Honeycomb Plate,LiuYanHui/Nanjing University of Aeronautics and Astronautics,0/105
  16. Studies on Laser Shearographic NDT of Honeycombsandwich Structure,TuJun/Nanchang University of Aeronautics and,0/68
  17. Metal Plate Detection Technology Research Based on the Electromagnetic Ultrasonic Surface Wave,WeiHongBo/Shenyang University of Technology,0/157
  18. Study on the Stability and Control Project of the Eastern Slope of JDC Mining Field,LiuJun/Chang'an University,0/17
  19. Technological Studies on Preparation by the Means of MFT and Fe Simulation of Compression Performance,DaiChaoLin/Yanshan University,0/67
  20. Finite element simulation of mechanical properties of aluminum foam,WangLing/Taiyuan University of Science and Technology,0/423
  21. Study on Producting Copper-Nanostructured Materials by Large Deformation Machining,LiuXu/Jiangsu University,0/9
  22. Research on Producing Nanostructured Materials by Machining Al6061 with Large Strain,HuangJun/Jiangsu University,0/21
  23. Compressive Damage Simulation of 3-dimensional Braided Composites,LiuLin/Nanjing University of Aeronautics and Astronautics,0/56
  24. Preparation and Properties of Cu-based Composite Material Based on Superplastic Deformation of Amorphous,ZhangLi/Nanchang University,0/67
  25. Finite Element Simulation of Solid-liquid Bimetal Composite,LiuJuanJuan/Northeastern University,0/95
  26. The NDT Technology for Impact Damage of Carbon Fiber Reinforced Resin Matrix Composite,WangDan/Nanchang University of Aeronautics and,0/148
  27. Research of Inner and Outer Surface Defect Identification Technology via Eddy Current Pipeline Internal Inspection,GuoXiaoZuo/Shenyang University of Technology,0/77
  28. Research and Application of the Speed-effect of Magnetic Flux Leakage Pipeline Detector,YuanXiPing/Shenyang University of Technology,0/72
  29. Reliability Analysis and Parameters Optimization of High-pressure Injection Mud Pump,SunBaoXian/Chongqing Jiaotong University,0/75
  30. Based on Ansys Software of Research of Temperature Field of Steam Heating Conveyor Belt Hot Plate,ManNingNing/Qingdao University of Science and Technology,0/21
  31. Research on Microstructure Evolution and Properties of Polypropylene via Equal Channel Angular Extrusion,WangZuoLan/East China University of Science and Technology,0/71
  32. Study of Rheological Behavior and Mechanism in Extrusion and Extensional Processes for Polyethylene and Its Blend Melt,YangJia/South China University of Technology,1/176
  33. Fatigue Analysis and Structure Optimization of PET Preform Mold Cavity,SongZuo/South China University of Technology,0/14
  34. The Research of Plastic Mould’s Failure Mechanism and Cladding’s Reproducing Technology,YuanLiuJie/Guangxi University of Technology,0/89
  35. Recycled Coarse Aggregate Concrete Pressed Stress-Strain Curve Experimental Research after High Temperature and Finite Element Heat Exchange Analysis,HuYueFeng/Guangxi University,0/51
  36. The Study of the Dynamic Properties and Damage of High Strength Concrete,ZhangZuo/Guangzhou University,0/128
  37. Research on the Process of Rotary Ultrasonic Grinding Machining for Si3N4Ceramics,WeiShiLiang/Harbin Engineering University,0/52
  38. Research on Experiment and Finite Element Simulation of Temperature Field for Cutting of Al2O3Ceramic Used the Ording PDC Cutter,PanZhan/Hunan University,0/60
  39. The Soft Base of the Pearl River Delta Settlement Analysis Report,ZhangZhuo/Changsha University of Science and Technology,0/75
  40. 2D Modeling and Inversion of Cross-hole Resistivity Imaging Research and Application,BaoXun/,0/63
  41. Research on Three Dimensional Tectonic Stress Field and Tectonic Fracture Forecasting in the Damintum Depression,GuoPeng/Liaoning Technical University,0/82
  42. Studies on Seismic Characteristics and Dynamic Mechanisms of Great Earthquakes,XueYan/China Seismological Bureau, Institute of Geophysics,0/220
  43. Research of Stress Magnetic Measurement Techniques on Marine Riser System,DengRui/Ocean University of China,0/141
  44. Coupled finite element model of photochromic liquid crystal elastomer 2D beam power and light induced bending characteristics analysis,LinYin/Fudan University,0/25
  45. Finite Element Simulation of Laser Crystal TSSG Growth Process,ZhuZhiWei/Changchun University of Science and Technology,0/58
  46. Research on Automatic Cooling System Using Temperature-Sensitive Magnetic Liquid,ZhangXuLe/Hebei University of Technology,0/35
  47. Experimental and Simulation Study of Pulsed Laser Milling on Ceramic Materials,ZhuYinBo/Jiangsu University,0/45
  48. Investigation on Mechanisms and Rules about Lapping & Polishing Process for End-faces of Optical Fiber Connectors,LiuDeFu/Central South University,1/444
  49. The Effect of Micro Motion on Electric Contact Failure and Method Discussion,HeZhanPing/Beijing University of Posts and Telecommunications,3/164
  50. Large Deformation Behaviors of Aluminium Alloy Welded Joints and the Basic Components for Automobile,QiaoJiSen/Lanzhou University of Technology,2/537

Total 22 Pages First Previous 3 4 5 6 7 8 9 10 11 12 Next Last

© 2012 www.DissertationTopic.Net  Mobile