Spraying - Dissertation

About 702 item dissertation in line with Spraying query results,the following is 1 to 50(Search took 0.07 seconds)

The Design of5-DOF Spraying Robot,DiMingChun/Huazhong University of Science and Technology,0/21
A Structural Optimization of Spraying Robot Based on the Deformation Errors Control,LiBo/Nanchang University of Aeronautics and,0/16
Study on Forming Process of Corn Straw Pellet Feed and Post Spraying of Liquid Addition Vacuum,DuXiaoYan/Henan University of Science and Technology,0/13
Studies on Dormant Characteristic and Releases from Dormancy of Ziziphus Jujube 'Mizao' bud,ZhouYan/Sichuan Agricultural University,0/17
Effects of Ca²⁺ Treatment on Heat Tolerance of Different Rosa Hybrida Varieties,ChenFangFang/Anhui Agricultural University,0/13
The Research on the the Regulation of Ratoon Sugarcane Yellow Seedling,LiuYaoZuo/Guangxi University,0/13
Research on the Semi-Automitic Wall Putty Spraying Machine,ZhaoHongLi/Changchun University of Science and Technology,0/5
The Research of the Mechanical Properties of Trailing Suction Hopper Dredger Dredging Pipeline,WeiHua/Jiangsu University of Science and Technology,0/4
The Kinematics Modeling and Simulation of Three Bar of Five Degree of Freedom Parallel Platform Laser Coating,WangPengFei/Qingdao Technological University,0/2
Spraying Robots in the Car Body Coating Applicationg and Quality Control Study,LiYaLin/Hunan University,0/69
The Design and Analysis for the the System of the Whole Asphalt Pavement Maintenance Truck and the Rotating Bin,DengHongWei/Chang'an University,0/21
Study on the Precision of Asphalt Binder Spraying and Chip Spreading for Synchronous Chip Sealer,WangZuoTao/Chang'an University,0/18
Research into the Key Technology of Airport Multi-function Spraying Vehicles,LuoCuiFang/Harbin Institute of Technology,0/13
Study on the Failure Analysis and Thermal Spray Remanufacturing for Construction Machinery Shaft Parts,ChenYuan/Tianjin University,0/5
Refractory Material Wet Spraying Machine Hydraulic System and the Device to Optimize the Design of Gunning,ZhangGang/Xi'an University of Architecture and Technology,0/7
Study on the Toluene Waste Gas's Purification in Biotrikling Filters and CT Scan Was Induced to Detect the Filter's Bed,ZhengATuan/Xi'an University of Architecture and Technology,0/8
The Influence of Acid Rain Stress on Chlorophyll Fluorescence Parameters of the4Tree Species in Zhejiang Province,ShenLu/Zhejiang Forestry University,0/29
The Analysis and Research on the Key Technology of the Delivery in Printing Ptess at Home and Abroad,TianXin/Beijing Institute of Printing,0/19
Research on Special Air-supplied Respirator for Spraying Process in Wood Furniture Enterprises,ZhengFenZuo/South China University of Technology,0/10
Study on Effect and Mechanism of Antagonistic Yeast in Combination with Hot Air Treatment on Postharvest Disease of Strawberry,MaoShuBo/Nanjing Agricultural College,0/1
Analysis, Microencapsulation and Properties of Squalene from Seeds of Camellia oleifera Abel,HanLuLu/Chinese Academy of Forestry,0/92
Research on Cavitation Erosion Resistance of NiTi Coating Deposited by Arc Spraying,ZhangZhiPing/Xi'an University of Petroleum,0/0
The Research of Al₂O₃/Ag-Cu-Ti Composite Coating Prepared by Plasma Spraying,YangZhuo/Harbin Institute of Technology,0/20
Study on High-aluminium Bronze Alloy Coating Made by Supersonic Plasma Spraying and Induction-refusion Composite Technology,YangXiaoTian/Lanzhou University of Technology,0/17
The Study on HVOF Sprayed Cr₃C₂-NiCr Coating,JiangWei/Shanghai University of Engineering Science,0/4
Influence of Remelting Process on Thestructure and Performance of the Iron-based Composite Coating by Flame Spraying,ZhangBo/Liaoning Technical University,0/4
The Research for Process of Preparing Micro-metallurgical Bonding Coating by Arc Spraying,ChengLiang/Tianjin University,0/0
AM5O Magnesium Alloy Surface Flame Spraving Al-Si-Fe Alloy Coating Organization and Performance Study,JiangXinLiang/Liaoning Technical University,0/5
The neural network in the supersonic plasma spray applied coating tribological analysis of,HaoGaoJie/Jiangxi University of Technology,0/17
The Research of Plasma Spraying with Liquid Material Injection by FLUENT,LvZuo/Huazhong University of Science and Technology,0/14
Study on Microstructure and Properties of Plasma Remelted Fe-based Coatings Deposited by Supersonic Arc Spraying,ChenWenQi/Huazhong University of Science and Technology,0/18
Research on Performance of Quasicrystalline Coating for Active Magnetic Bearing System,XueJianGang/Nanjing University of Aeronautics and Astronautics,0/5
Preparation and Mechanism of BaTiO₃Ceramics Coating for Remanufactured Parts,LuXiaoLiang/Hebei University of Technology,0/3
The Influence of Post-fusing Time and Different Coating Thickness on Fatigue Performance of Flame Thermal Spraying Components,ZhaoZhiPing/Lanzhou University of Technology,0/105
Study of Nickel-based Coatings Prepared by Spraying and Remelting Process on Aluminum Bronze,HanFuHui/Chongqing University of Technology,0/45
Plasma Spraying Liquid Zinc Corrosion Resistance Mo and Mo/Al₂O₃-TiO₂Composite Coatings Technology Research,XiaoYue/Jiangsu University of Science and Technology,0/1
The Research of Molten Zinc Corrosion-Resistant Coating,HaoYan/Jiangsu University of Science and Technology,0/2
Study on Preparation and Tribological Properties of Nano Ceramic Coating Applying to High-speed Conditions,WangYanYan/Henan University of Science and Technology,0/13
Research on Preparing Metallurgy Diffusion Layer on Magnesium Alloy Surface by Electric Arc Spraying Pure Aluminium,LiHuiMin/Taiyuan University of Technology,0/30
An Experimental Study on Inner Cladding Casting,WangYaJun/Chongqing University,0/20
Study of Preparation and Corrosion Property of Glass-ceramic Coating on the Metal Surface,ChenPingHu/Nanhua University,0/104
Study on the Microstructure and Properties of Plasma-spraying/Plasma Spray Welding Coating on Copper Alloy,KeDeQing/Wuhan University of Science and Technology,0/34
Research on cavitation erosion resistance of NiTi coating,ZhangJun/Xi'an University of Petroleum,0/0
Preparation and Microstructure of Porous NiTi Coating,LiJie/Xi'an University of Petroleum,0/1
The Structure Innovative Design and Study of the Atomization Lacquer Material Spraying Machine with Nozzles,LiuWen/Xiangtan University,0/38
Tribological and Corrosion Properties of Plasma Spraying Al₂O₃/Al₂O₃-TiO₂Reinforced Aluminum and Nickel-based Coatings,YiXiang/Harbin Institute of Technology,0/151
Structure Optimization and Insulation Properties of Plasma Sprayed At/Al₂O₃Composite Coating,GuoRui/Yanshan University,0/3
Research on the Preparation of Medium Thickness Hard Coatings,XuXinJun/Donghua University,0/40
Preparation, Performance Characterization and Mechanism Research of Coating on High Efficient Continuous Casting Crystallizer Copper Surface,LiHui/Jiangsu University,0/20
Preparation and Properties of UHMWPE Coating on the Surface of Carbon Steel by Flame Spraying,WangXiaoYan/University of North,0/2