cutting performance - Dissertation

About 86 item dissertation in line with cutting performance query results,the following is 1 to 50(Search took 0.050 seconds)

Study on the Preparation and Cutting Performance of Micro-nano Composite Gradient Self-lubricating Ceramic Tool,XuXiuGuo/Qilu Industrial University,0/35
Al₂O₃Based Micro-nano-composite Ceramic Tool Material and Its Cutting Performance,LiuWeiMin/Shandong University,0/167
Research on Edge and Surface Conditioning Based on Micro-abrasive Water Jet,ChenZhongMin/West China University,0/14
Study on Cutting Performance and Tribological Behavior of Al₂O₃-base Ceramic Tool with Water Vapor as Coolant and Lubricant,YangFan/Lanzhou University of Technology,0/122
Research on the Microstructure, Properties and Cutting Performance of Ultrafine-grained Ti(C, N)-based Cermets,ZhanBin/Hefei University of Technology,0/162
The Impact of Supercooling Degree on Iron and Copper Alloys and the Research on Iron and Copper Alloys Cutting Machinability,ZhangHongWei/Harbin University of Science and Technology,0/7
Research on Dynamic Characteristics of Continuous Miners and Optimization Design of Continuous Miners's Structure,CaoYanLi/Liaoning Technical University,0/10
Study on the Typical Biological Soft Tissue Cutting for Needle Biopsy,GaoLiYing/Shandong University,0/94
Study on Development of Al₂O₃-TiC Micro-laminated Composite Ceramic Tool Materials and Cutting Performance,ZhaoYan/Shandong University,0/24
Research on the Cutting Tool Materials of Ti(C,N)-based Cermets and the Cutting Performance,TangHuiLan/Hefei University of Technology,0/84
Cutting Behavior of ZrO₂Based Nanocomposite Ceramic Tool,ZhangPeng/Shandong Institute of Light Industry,0/92
Study on the Cutting Performance of Alumina Based Nanocomposite Ceramic Cutting Tool,ZhouQiFen/Shandong Institute of Light Industry,0/96
Study on TiB₂-Ti（C, N） Composite Ceramic Tool Materials and Cutting Performance,LiuLin/Shandong University,1/85
Study on Titanium Diboride Matrix Composite Ceramic Tool Materials and Tool Failure Mechanisms,SongJinPeng/Shandong University,1/175
Study on Fabrication and Cutting Performance of Al₂O₃-TiC-TiN Ceramic Cutting Tools,FeiYuHuan/Shandong University,0/320
Fabrication and High Speed Cutting Performance of Sialon-Si₃N₄Graded Nano-composite Ceramic Tools,ZhengGuangMing/Shandong University,0/415
Experimental Research and Cutting Property Analysis on Turn-Chasing Combined Machining,LiChengYao/East China University of Science and Technology,0/21
Analysis of Cutting Performance for AZ91D Magnesium Alloy,LiuZeKang/Jilin University,0/46
Experimental Research on Cutting Performance of Titanium Alloys with Different Microstructure,LiuMin/Shanghai Jiaotong University,0/77
Study on Development of TiB₂-（W,Ti）C Composite Ceramic Tool Materials and Cutting Performance,YangTongChun/Shandong University,0/46
Study of Preparation and Properties of Nitrides/Tantalum Multilayer Films,ShangHongFei/Research Institute of Mechanical,0/116
Effect of Boronizing Treatment on Microstructure, Thermal Shock Resistance and Cutting Performance of Cermets,LiBinBin/Hefei University of Technology,0/39
The Research of a Newly Developed Cold Work Cast Die Steel,ZhuLei/Jilin University,0/59
Research on the Microstructure and Properties of Fine Grade Ti(C,N) Based Cermets,ZhangXiaoBo/Hefei University of Technology,0/363
Research on Cutting Performance and Wear Failure Mechanism of Graded Coating HSS Tools,XiaoJiMing/Xi'an University of Technology,5/718
Research on Ultra-fine Ti(C, N) Based Cermet Cutter and Its Cutting Behavior,ChenWenLin/Hefei University of Technology,1/532
Study on Magnesium Matrix Interpenetrating Composites Reinforced by TiAl₃ Network Structure,WangShouRen/Shandong University,1/591
Study on Advanced Titanium Diboride Matrix Composite Ceramic Tool Materials and Cutting Performance,GuMeiLin/Shandong University,3/507
Research on Abrasive Suspension Jet Technology and Its Mechanism,LiuXiaoJian/Shanghai University,2/301
Study on Advanced Self-Toughening Silicon Nitride Matrix Nanocomposite Ceramic Tool Materials and Properties,ZouBin/Shandong University,10/568
Study on Development and Cutting Performance of High Mechanical Property Cermet Tool Materials,WangSuiLian/Shandong University,6/811
Study on the Fabrication and Cutting Performance of Ceramic Tool Materials Based on Multi-phase and Multi-scale Nanocomposites,LiuHanLian/Shandong University,12/624
Computer Aided Alloy Design of High Performance Prehardened Mold Steel for Plastic,HeYanLin/Shanghai University,7/436
Study on High-Performance Ultra-fine Ti(C,N)-based Cermets for Tool Materials,XiongJi/Sichuan University,3/603
Research on Cutting Performance of Shearer Drum and Cutting System Dynamics,LiuSongYong/China University of Mining and Technology,3/360
Multi-Constrained Analysis in Optimization of Metal Cutting and Its Application,LiuGang/Shanghai Jiaotong University,0/252
Study on the Fabrication of Diamond Coated Tools and Applications,MaYuPing/Shanghai Jiaotong University,0/228
Fabrication and Properties of Al₂O₃ Based Graded Nanocomposite Ceramic Cutting Tools,LiYanZheng/Shandong University,0/133
Wear Characteristic and Performance of Cutting Tool in High-efficiency Machining Ti6Al4V,FanYiHang/Harbin University of Science and Technology,0/414
Development of Zirconia Matrix Nano-Ceramic Tool and Die Materials and Its Application Research,ZhangRongBo/Shandong Institute of Light Industry,7/213
Research on Fabrication and Machining Performance of Boron-Doped Diamond Coated Tools,YaoChengZhi/Shanghai Jiaotong University,4/252
Research on the Influence of Temper Temperature of Austenite to High-speed Cutting Properties of Austempering Ductile Iron (ADI),WuShaoHua/Suzhou University,0/191
A high-strength cutting zinc alloy extruded profiles developed,XiaoXian/Central South University,3/83
Matrix of of coated carbide organization and performance,WangSheQuan/Central South University,2/228
K24 nickel-base superalloy cutting performance test,ZuoZhiFeng/Dalian University of Technology,7/395
FEA of Metal Cutting Process Based on Ti(C, N)-based Cermets Cutter,LiWei/Hefei University of Technology,1/241
Study on Fabrication and Cutting Performance of Nano-Scale Zirconia Toughening Alumina Matrix Ceramic Tool Materials,ZhongJinBao/Shandong University,5/494
Research on Cutting Performance of Coated Tools under Dry Drilling Al-Si Alloy,JiaZuo/Xi'an University of Technology,2/162
Research on Deposition of High Quality Diamond Film on Cutting Tools with Complex Shape and Their Cutting Performance,XueHongGuo/Shanghai Jiaotong University,3/209
Research on High Speed Face Milling Cutter and Its Cutting Performance,SunYongJun/Harbin University of Science and Technology,2/312