About 52 item dissertation in line with flow channel query results,the following is 1 to 50(Search took 0.078 seconds)

  1. The Design of Flow Channel for Full Amount of Valve and Performance Analysis,WangHeLong/Harbin University of Science and Technology,0/6
  2. Study of the Electro-thermal Stability of3kA Single Flow Channel Cold Dielectric YBCO High Temperature Superconducting Cable,WangYaSen/Huazhong University of Science and Technology,0/6
  3. Numerical Simulation of the Three-dimensional Flow Field in the Current Regulator Based on the Moving Mesh,QiYongZuo/Xinjiang Agricultural University,0/5
  4. Based on Composite Lumped Parameter Method in Research on Dynamic Characteristics of Superheater,LiZhiHe/Tohoku Electric Power University,0/22
  5. Numerical Simulation of Magnetohydrodynamic Laminar Flow in Duct with Flow Channel Insert,XuTianNeng/Hangzhou University of Electronic Science and Technology,0/23
  6. Performance Analysis and Structural Optimization of S-shaped Flow Channel Liquid-cooling Plate,DiNiNa/Xi'an University of Electronic Science and Technology,0/31
  7. Injection Molding Defects Analysis with Flow Channel Optimization and Molding Process Optimization Based on Moldflow,QianSiQiang/Xiangtan University,0/23
  8. Visualization of Water Distribution and Removal in the Cathode of Proton Exchange Membranes Fuel Cells,MaHaiPeng/Dalian Institute of Chemical Physics,1/357
  10. Research and Application of Filtering Grid Scale and Meshing Adaptive-control Strategy for Large Eddy Simulation,ZhangBin/Shanghai Jiaotong University,1/267
  11. Numerical Simulation and Performance Research of Flow-Path in a Ram-Rotor,HanJiAng/Harbin Institute of Technology,6/209
  12. Untreated Sewage Turbulent Characteristics and the Research on Heat Pumps Using Untreated Sewage as the Heat or Cold Source,QinNa/Tianjin University,1/68
  13. PIV Measurements and Direct Numerical Simulation of Turbulence Modification in a Horizontal Particle-laden Channel Flow,LiJing/Huazhong University of Science and Technology,4/328
  14. Shape Optimization Design of Siphon Channel Based on Computational Fluid Dynamics,PengZhiWei/Hunan University,1/252
  15. The Designing and Experimental Research of the Cylinder-Shape ER-Valve,XueXianLong/Jilin University,0/86
  16. Study on Layout of Passenger Station in Junction Terminal and Transport Capacity of Passage,YuanMinHong/Beijing Jiaotong University,12/802
  17. The Flow Channel Design and Rock Breaking Characters of Suction Pulse Jet,ZhangYong/China University of Petroleum,2/169
  18. Study on the Hydraulic and Anti-clogging Performance of Emitters,WangJianDong/China Agricultural University,34/217
  19. Study on Permeability of Fiber Perform in LCM,TianZhengGang/Wuhan University of Technology,7/254
  20. Lateral flow axial piston Research,ZhuGeHui/Southwest Jiaotong University,8/172
  21. Research on Axial Flow Passage of Axial Piston Pump,SunMingZhi/Southwest Jiaotong University,12/234
  22. Dual Screw Refiner structure and flow field analysis,FengZhenHua/Beijing University of Chemical Technology,2/142
  23. Study on Flow Field in Extrusion Die for Plastics Window Profile,BianXiaoMing/Beijing University of Chemical Technology,2/86
  24. Research on Modeling of Flows in Inflow and Outflow Conduits Based on Fluent Software,HuYuXian/Wuhan University,12/1055
  25. Profile Die Design and Flow Analysis of PVC/wood Composite,WangZhe/Beijing University of Chemical Technology,6/472
  26. Flow visualization methods, techniques and its application in the design flow pump Application,ChengYing/Yangzhou University,1/208
  27. Temperature Field Simulation and Parameter-Optimization of Way of Flowing Gas in the High-Power Transverse-Flow CO2 Laser,HanYouZhen/Wuhan University of Technology,1/118
  28. Simulation of Flow in Kneading Block in Intermeshing Co-Rotating Twin Screw Extruder,LiPeng/Beijing University of Chemical Technology,4/150
  29. Research of Function Block Structure in Plastic Profile Extrusion Die CAD System,FengLin/Hefei University of Technology,2/43
  30. Numerical Simulation and Optimization of Flow Field of Proton Exchange Membrane Fuel Cell for Vehicles,WangChuanBin/Chongqing University,0/145
  31. Means of Design to Double Channel Impeller Pulp Pump,ZhouFangMing/Huazhong University of Science and Technology,1/65
  32. Passenger traffic channel capacity through research,LiPengAo/Beijing Jiaotong University,1/178
  33. The Glutenite Bodies Depositional Stage Fine Division of the upper Fourth Member of the Sha He Jie Sand Formation in Yan Jia-Yong an Zone,ShiNing/Ocean University of China,3/146
  34. Simulation Study of Discrete Element Method on Granular Flow and Heat Transfer,LengTaoTian/Dalian University of Technology,0/235
  35. Flow Field Numerical Simulation and Structural Optimization of Tooth Shape Labyrinth Flow Channel,NieJing/Xinjiang Agricultural University,0/50
  36. Oilfield water injection wells with the design and research,ChengXuBo/Xinjiang University,0/108
  37. Asymmetrical flow valveless piezoelectric pump Theoretical and Experimental Study,TaoWeiWei/Jilin University,0/80
  38. Bipolar Plate Design and Optimization Based on Novel Biometric Method in PEMFC,QiaoYunQian/Wuhan University of Technology,1/84
  39. S- Type Runner Simulation and Fin Structural Optimization of the Cold-plate,DongFeng/Xi'an University of Electronic Science and Technology,0/62
  40. Turbine Last Stage Performance of variable conditions and to improve the design flow,LeiFengLin/Zhengzhou University,1/149
  41. CAE Analysis of Unbalanced Filling Induced by Shearing in Natural-balanced Runners,XuJianWei/Zhengzhou University,1/36
  42. Double-channel Sewage Pump Flow Analysis and Design Method of the Research,DanZuoZuo/Lanzhou University of Technology,1/52
  43. Study on Structure Design and Performance Analysis of the Solar Thermal Thruster,XingBaoYu/National University of Defense Science and Technology,0/20
  44. Flow Simulation of Micro Tubing Extrusion Die and Study of Micro Tubing Processing,GongZuo/South China University of Technology,2/104
  45. Numerical Simulation on High Suction Double-Stage Centrifugal Pump Components,DingXiNing/Xi'an University of Technology,0/38
  46. Parametric Design of Foamed Sheet Die and CAE Analysis,WuDianLi/Suzhou University,1/44
  47. The Design and Theoretical Ansalysis of an New Melt-Distribution Structure in Extrsion Die,ZhangXiaoPing/Beijing University of Chemical Technology,1/67
  48. The Optimum Structural Design of Spiral Wound Membrane Module,ZhangZhengFu/Beijing University of Chemical Technology,0/24
  49. Research on Continel Gravity Flow Deposits in No.1 Member and No.2 Member of Nenjiang Formation of Central Depression in the North Songliao Basin,SunLiMei/Northeast University of Petroleum,0/78
  50. Structured surface of the abrasive flow path constraint distribution and dynamics research group,ZhongJiaQi/Zhejiang University of Technology,0/19

Total 2 Pages First Previous 1 2 Next Last

© 2012 www.DissertationTopic.Net  Mobile