About 3351 item dissertation in line with TG14,Metallic materials query results,the following is 1 to 50(Search took 0.061 seconds)
- Experimental and Theoretical Investigations on the PLC Effect in Pressed AZ Magnesium Alloy,ZengShaoFeng/Fuzhou University,0/34
- The Control Study of as and Cu Trace Elements in Molten Metal,LuoLinGen/Anhui University of,0/29
- Hot Deformation Behavior of Ti-43Al-9V-Y Alloy,XiongNingNing/Harbin Institute of Technology,0/29
- Synthesis of Silver-based Nanostructures via Laser Chemistry,DaiXiaoLei/Tianjin University,0/4
- Investigation on the Effects of Mean Strain on Low-cycle Fatigue Behavior of Aluminum Alloy7050-T7451,ChenZuoZuo/Zhejiang University,0/41
- Study on Strength-toughness Mechanism of Maraging Stainless Steel,ZhouZuoZuo/Harbin University of Science and Technology,0/6
- Effects of Specimen Thickness and Pre-fatigue Deformation on the Uniaxial Tensile Behavior of Coarse-Grained Pure Aluminum,LuMeng/Northeastern University,0/4
- Investigations on Fatigue Dislocation Structures and Their Thermal Stabilities of AL6XN Super-austenitic Stainless Steel,YiZuoZuo/Northeastern University,0/6
- Study on Microstructures and Mechanical Properties of High-aluminum High-manganese Steels,LiZuoZe/Northeastern University,0/7
- Mechanism of Deformation Induced Plasticity Enhancement on Advanced High Strength Steel,FangGuiLing/Northeastern University,0/11
- The Influence on Microstructure and Mechanical Properties of Aluminum Alloy by Scrap Aluminum,YuanFangLan/Northeastern University,0/7
- Research on Microstructure and Properties of Ti Micro-Alloy Super-High Strength Wear-Resistant Steel,HanJie/Northeastern University,0/16
- Precipitation Behavior of MnS Inclusion in the Steel,LiuXue/Northeastern University,0/23
- Investigation of Thermal Deformation Behavior and Fatigue Properties of TC11Titanium Alloy,KangLei/Northeastern University,0/15
- Study of Microstructure and Mechanical Properties of New Low Alloy Wear-resistant Steel,TianChangLiang/Northeastern University,0/10
- Study on the Superplastic Deformation of Al-12.7Si-0.7Mg Alloy,LiZhuoLiang/Northeastern University,0/4
- Research on Microstructure and Properties of Low-cost Cold-rolled Dual Phase Steel,MaShiCheng/Northeastern University,0/10
- Study on Microstucture and Properties of a New High Temperature Titanium Alloy,HuangDingHui/Northeastern University,0/14
- Research and Development of High Strength Ultra Low Carbon Bainitic Steel,XiaWenZhen/Northeastern University,0/7
- Research on the Superplaticity in Al-Mg-Li Alloy,ZhaoNanNan/Northeastern University,0/5
- Study on Hot Deformation Behavior of2Cr13Steel,YiXiao/Northeastern University,0/9
- Research of High Strength Corrosion-resistant X70Pipeline Steel,LiJing/Northeastern University,0/9
- Study on Microstructures and Properties of Carbide-free Bainitic Steels Subjected to Continuous Cooling,LiuDi/Northeastern University,0/6
- Reseach on Combined Forming Process of Die Casting and Forging of Structural Component of AM60B Magnesium Alloy with Thin Wall and High Strengthening Ribs,WangDaYu/Harbin Institute of Technology,0/14
- Study of the Linear Expansion Coefficient of Gradient Sand Mould for Titanium Alloys,ChenLingJie/Harbin Institute of Technology,0/18
- Porous Nozzle Melt Purification Technology,TanYong/Guangxi University,0/26
- Key Metallurgical Technology of High Heat Input Welding Shipbuilding Steel,XiaWenYong/Iron and Steel Research Institute,0/120
- Study on Microstructure and properties of Al-Mg-Mn-Sc-Zr alloy sheet,ChenQin/Central South University,0/21
- Study on thermal stability of TC11 titanium alloy and high temperature creep behavior,QiYanLing/Central South University,0/25
- Al-Zn-Mg-Zr alloy containing Sc homogenization and thermal deformation behavior of,ZhangZhiYe/Central South University,0/17
- Design and preparation of high modulus of rare earth magnesium alloy,HuJiLong/Central South University,0/1
- Al-Cu-Mg- (Ag) study on Microstructure and thermal properties, fatigue properties of the alloy.,GuYanXia/Central South University,0/8
- Microstructure and Properties and Deformation Simulation of Ti-48.5Al-6Nb-6V-0.25Y Alloy,ZhengBeiBei/Harbin Institute of Technology,0/25
- Study on Corrosion Resistance of Nonisothermal Aged7050Aluminum Alloy,XiaoWenQiang/Harbin Institute of Technology,0/24
- Simulation of Temperature Field and Formation of Craters Irradiated by High Current Pulsed Electron Beam,LuoDian/Harbin Institute of Technology,0/15
- Numerical and Experimental Study on Direct-reverse Quick Gas Blow Forming of Magnesium Alloy Sheet,ZhangZhiPeng/Harbin Institute of Technology,0/11
- Molecular Dynamics Study on Intrinsic Mechanics Behaviour of Tungsten Nanoscale Single Crystal,ZhouHuanHuan/Harbin Institute of Technology,0/18
- Microstructure and Properties of Y2O3Dispersion Strengthened Fe-Cr-Al Sheet Prepared by EBPVD,SuHongNa/Harbin Institute of Technology,0/15
- Preparation of Mg-Zn-Ca Alloy with Y Element and Research of Its Thin-walled Tube Extruding-drawing Process,HanJie/Harbin Institute of Technology,0/18
- The Process Optimization on Current Auxiliary Forming of Titanium Bellows,ZhangLeTao/Harbin Institute of Technology,0/57
- The Study of the Effect of Surface Step and Void on the Initial Plasticity Yield of Single Crystal Copper,SiMengLi/Harbin Institute of Technology,0/11
- SPF/DB Processing and Assessment for Multi-sheet Structure of TA15Titanium Alloy,DuZhiHao/Harbin Institute of Technology,0/21
- Process on Levitation Cold Crucible Continuous Casting and Directional Solidfication of Tial-based Alloy,LiMingLiang/Harbin Institute of Technology,0/29
- Study of Processing, Microstructure and Properties of T15Powder High Speed Steel,ChenNianLian/Harbin Institute of Technology,0/33
- Study on Microstructure and High Temperature Mechanical Properties of Mg-4Y-3Nd-0.5Zr Alloy,WangHao/Harbin Institute of Technology,0/9
- Effect of Addition Elements on the Microstructure, Mechanical Properities and Interfacial Reaction of TiAl-based Alloys,WangZhiBin/Harbin Institute of Technology,0/22
- Microstructure and Mechanical Properties of a High Temperature Alloy for Short-term Use at700℃,ZhangHuiLiang/Harbin Institute of Technology,0/50
- Microstructure and Mechanical Properties of Rapid Solidified Al-Fe-Cr-Ti Elevated Temperature Alloy,WuJing/Harbin Institute of Technology,0/54
- Study on the Microstructures and Mechanical Properties of Mg-Zn-Y-Zr-xSb Alloys,ZhangXiaoHui/Harbin Institute of Technology,0/14
- Research on Grain Growth and Mechanical Training Process in Polycrystalline Ni-Mn-Ga Alloys,LiYongHua/Harbin Institute of Technology,0/13
Total 68 Pages First Previous 1 2 3 4 5 6 7 8 9 10 Next Last
© 2012 www.DissertationTopic.Net Mobile
|