Dissertation　

About 2100 item dissertation in line with TQ320,General issues query results,the following is 1 to 50(Search took 0.023 seconds)

  1. The Expert System of Injection Mold Based on SolidWroks,SunTao/Dalian University of Technology,0/10
  2. Study on Properties and Mechanism of EVA Chemical Intumescent Flame Retardant,ChenTao/Dalian University of Technology,0/1
  3. Preparation and Properties of the Corn Gluten Meal Biodegradable Plastics,WangGuanYu/Tianjin University of Science and Technology,0/12
  4. Study on Increasing the Compatibility of Incompatible Polymer Systems,LiuKeYong/Dalian University of Technology,0/4
  5. Synthesis and Properties of Fluoroacrylate Copolymer,QiPeng/Dalian University of Technology,0/24
  6. The Preparation of Halogen-free Flame Retardant Polystyrene (PS)/elastomer Nano-composites,HuLinYan/Dalian University of Technology,0/9
  7. Study on Preparation and Properties of Permeability LDPE Composite Film,NieZuoZuo/Tianjin University of Science and Technology,0/61
  8. Study on the Preparation and Properties of HDPE/UHMWPE/HA Composites,ZhangNa/Tianjin University of Science and Technology,0/30
  9. Study on Crystallization and Degradation Properties of P(3HB-co-4HB),WenXing/Tianjin University of Science and Technology,0/27
  10. Study on Composites of Bioplastic P(3HB-CO-4HB)/Wood Flour,PengQuan/Tianjin University of Science and Technology,0/15
  11. Preparation and Properties of Lldpe/Ldpe Blend and Composite Films,QinXiaoMei/Tianjin University of Science and Technology,0/70
  12. Preparation and Application in Plastic of the Permanent Antistatic Agent,XuZuoZuo/Dalian University of Technology,0/19
  13. The Research and Application of LP in the Injection-Molding Shop of C Company,XuJianBo/Zhejiang University of Technology,0/12
  14. Fatigue Failure Analysis of Pinch Valve and Test Platform Design,ZhangYi/Huazhong University of Science and Technology,0/1
  15. Research on the Control Method of Injection Velocity in the Process of Injection Molding,ZhangHongYan/Northeastern University,0/1
  16. Research on the Mechanism of External Gas-Assisted Injection Molding GAS-Packing Stage and Its Simulation,SuMaoYing/Zhejiang University of Technology,0/2
  17. Temperature Fiefd Analysis of Rapid Heat Cycle Injection with Electric Heating,KongYin/Zhejiang University of Technology,0/11
  18. Experimental Study on Effects of Rapid Heat Cycle Molding Process Parameters on Surface Quality of Plastic Products,ChenChuan/Zhejiang University of Technology,0/7
  19. Preparation and Characterizations of Biodegradable Zein/PPC Film,LiXiuMing/Tianjin University of Science and Technology,0/5
  20. Study on Burst Pressure of Plastic Pipe Reinforced by Cross-Winding Steel Wires,RaoJing/Zhejiang University,0/24
  21. Study on Preparation and Properties of LDPE Composite Film,LiYao/Tianjin University of Science and Technology,0/3
  22. An Applide Research for Injection Mold CAD/CAE Based on an Actual Example,GaoMaoTao/Hunan University,0/75
  23. Experimental Research of Machining Nano Structrues on Polymer Surface Based on AFM Tapping Mode,LiuWeiTao/Harbin Institute of Technology,0/25
  24. Study on Injection-compression Moulding of Optical Componets with Complex Structure,ZhaoJinChuan/Harbin Institute of Technology,0/36
  25. Research on Process and Reliability of PHA as Intelligent Card Material,HeHuan/Tsinghua University,0/13
  26. Micro-injection Molding Mechanism and Process Technology for High Aspect Ratio Polymer Elements,WangZuoYu/Tianjin University,0/1
  27. The Research on Conceptual Design of Injection Mold Based on KBE,FengHaiMei/Huazhong University of Science and Technology,0/19
  28. Research and Development on MES Oriented Resource Management System for Injection Molding Production,LiHeng/Huazhong University of Science and Technology,0/5
  29. Modeling and Analysis of Three-dimensional Transient Heat Transfer for Injection Mold,LiZan/Huazhong University of Science and Technology,0/16
  30. Research on Technology of Workshop Production Scheduling for Injection Molding Enterprise,LiuYangYang/Huazhong University of Science and Technology,0/2
  31. Detection Technology Based on Machine Vision in the Plastic Injection Molding Process,YangWei/Huazhong University of Science and Technology,0/19
  32. Method of Core-pulling Mechanism Design in Injection Mold Based on Feature Recognition,MaoQiZhu/Huazhong University of Science and Technology,0/7
  33. Intelligent Design of Plastic Injection Mold Gating System Based on CAD/CAE Integrated,LongHai/Huazhong University of Science and Technology,0/16
  34. Research of Injection Unit and Ejection Unit Control Technology of All-electrical Injection Molding Machine,XuYingPeng/Huazhong University of Science and Technology,0/14
  35. Research of Essential Technologies of the CNC System Used on the All-electric Injection Molding Machine,LiFangFu/Huazhong University of Science and Technology,0/22
  36. NC Incremental Forming for PVC,RenYunXing/Nanjing University of Aeronautics and Astronautics,0/5
  37. Airbag Bracket Injection Molding Simulation and Process Analysis,YanSong/Shanghai Jiaotong University,0/20
  38. Pressure Control and Numerical Simulation of the Microcapillary Formation Within Extruded Plastic Films,CaoJiaPei/Zhejiang University,0/8
  39. Research on Numerical Simulation Analysis and Process Parameters Optimization of Rapid Heat Cycling Molding,DingQingGuo/Kunming University of Science and Technology,0/32
  40. Numericai Simulation of Strengtn of Buried Polyethylene Pipe under Typical Complex Loading,MaJinJin/Zhejiang University,0/22
  41. Research and Design of the Injection Molding Machine Control System,HongXiaoJing/Hefei University of Technology,0/110
  42. Design and Numerical Study of the Thermosetting Plastic Cold Runner Injection Mould,NieYong/Qingdao University of Science and Technology,0/6
  43. Study on Injection Molding Parameter Based on Cavity Pressure Monitoring Technology,ZhangXiaoBin/Huaqiao University,0/2
  44. Study and Design of Wet Resin Batching System Based on PLC and WinCC,ShiYaJuan/Hefei University of Technology,0/41
  45. The Aging Study of Extrusion Processed FLAX/HDPE Composites,YiMing/Northeast Forestry University,0/55
  46. Fabricating Polymer Superhydrophobic Surface by Thermal Microreplica Molding,LinXunLiang/Zhejiang University of Technology,0/24
  47. The Surface Quality Control of Injection Molding for Dashboard of Automobile Based on Cae,ZhuChengBing/Zhejiang University of Technology,0/104
  48. Injection Molding Technic Research of Cable Box Based on Cae,LiJunHu/Zhejiang University of Technology,0/46
  49. Study on Preparation and properties of PVB and PVDF hollow fiber ultrafiltration membrane,ShenJianPing/Shanghai Normal University,0/131
  50. Preparation and Properties of Microencapsulated Phase Change Materials with Acrylic-based Polymer Shells,QiuXiaoLin/Tsinghua University,0/55

Total 42 Pages First Previous 1 2 3 4 5 6 7 8 9 10 Next Last

© 2012 www.DissertationTopic.Net  Mobile