Dissertation > Excellent graduate degree dissertation topics show

Method Research on the Progressive Generation and Transformation of the Mould and Die BOM

Author: ZhuDeKui
Tutor: ChenQingXin
School: Guangdong University of Technology
Course: Mechanical and Electronic Engineering
Keywords: Mould & Die rule reasoning progressive compare method
Type: Master's thesis
Year: 2006
Downloads: 92
Quote: 0
Read: Download Dissertation


Nowadays, because of increasing market competition and rapid change of customer’s requirements, people in Mould & Die manufacturing enterprises have been searching how to modify the traditional paradigm of design and production to improve the efficiency of product development by fully using the current resource of Mould & Die enterprise. To attain this aim, Product Data Management(PDM) and Enterprise Resource Planning(ERP) came forth. With the development of enterprise information technology, Mould & Die manufacturing enterprises have pressed for that PDM could be extended to the entire life cycle of Mould & Die. As the bridge of information integration between PDM and ERP system, BOM(Bill of Material) management is becoming very important.This paper firstly analyzes the process of progressive generation and transformation of Mould & Die BOM. Aiming at the characteristic of progressive generation and transformation of Mould & Die BOM, combining principle of expert system, representation method for product is adopted to express the transforming rules. And then reasoning technology and precise matching method are used to come true the right transformation on Mould & Die BOM. An example has indicated that the method of the transformation is efficient. It doesn’t need any factual fault cases, can easily build the rudiment of the reasoning system by gaining some expert experiences. And then it is the workable way at the beginning of setting up the transform system. This paper secondly analyzes the characteristic of process of Mould & Die MBOM progressive add. And then researches the method of Mould & Die MBOM progressive add based on width research strategy. Finally, aiming at version control problem ofMould & Die MBOM progressive generation, this paper researches compare method of Mould & Die MBOM.At last, as the verification to the forward researching, the system, focused on the progressive generation and transform of Mould & Die BOM, is developed using GUI tool — Visual C#.net on Windows 2000 platform. The operation examples of basic of rule reasoning Mould & Die BOM transform and compare of Mould & Die MBOM management system are given.

Related Dissertations

  1. Analysis of Steel Frame with a Key Column Destroyed,TU391
  2. Study on Related Factors and Serum Il-1β, IL-6 Levels in Patients with Progressive Cerebral Infarction,R743.3
  3. The Error Analysis of Progressive Complex Sentences of Korean Students,H195
  4. Mechanism Analysis of Masonry Buildings with Bottom Frames under Blast Loading,O383.2
  5. An Analysis of Crack Growth Simulation and Crack Arrest in Integrally Stiffened Panel,O346.1
  6. The triangular grid progressive compression algorithm,TP391.41
  7. 3D model simplification algorithm demo platform,TP391.41
  8. Research on Cremin’s Ecology of Education,G40
  9. Empirical Study of Neutralizing Monoclonal Antibodies of Anti-GBM Antibody Against Established Anti-GBM Glomerulonephritis in Rats,R692.3
  10. Adjustment Disorder (SCL-90) and Cognition Ability Among Male and Female Tibetan Hanzu and Zangzu Freshmen and Association with Serum Oxytocin, Cortisol and Immunoglobulin,R33
  11. Intelligent Control System for Brushless DC Motor Used in Direct-Drive Progressive Cavity Pump,TM33
  12. Dynamic Response and Progressive Collapse of Reinforced Concrete Frame to Explosive and Impact Loads,TU375.4
  13. Study in Monofactorial Stratifications and Change of Nitric Oxide Level in Serum of Patients with Progressive Ischemic Stroke,R743.32
  14. On the classification system and a progressive system,D926.7
  15. Research on All Phase Biorthogonal Transform and Its Applications in Image Coding,TP391.41
  16. Research on the Shear Failure Mechanism of Frame Beam on the Process of Reinforced Concrete Frame Collapsing,TU375
  17. A Intervention Study on Fatigue and Anxiety of Young Cyclist in Suzhou,G804.8
  18. Studies on the Agricultural Technology Progresses to Agriculture Industry Restructure Influence,F321
  19. The Technical Research of Emergent Event’s Auto-process Based on Rule Reasoning,TP311.52
  20. Space Grid Structure’s Criterion of Failure Modes and Design Improvement,TU393.3
  21. Mold offer decision support system,TP399

CLC: > Industrial Technology > Metallurgy and Metal Craft > Cutting tools, abrasives,abrasive tools,fixtures,molds and hand tools > Mold
© 2012 www.DissertationTopic.Net  Mobile