Dissertation > Excellent graduate degree dissertation topics show

Research and Application of the Tandem Pulsed Coordination Controller on DC Welding Power Source

Author: CuiJia
Tutor: LiHuan
School: Tianjin University
Course: Materials Processing Engineering
Keywords: heat-affected zone micro-controller unit double-wire pulsed controller high speed photograph electric signal sampling
CLC: TG434
Type: Master's thesis
Year: 2006
Downloads: 116
Quote: 2
Read: Download Dissertation

Abstract


As the modernized industry developing, efficient welding technique is great pushed forward. High-efficiency of welding has become an exigent request. However, the tenacity will decline and the size of grains will increase with the overheating coarse grain zone expanding in the heat-affected zone (HAZ), it will have poor shaping. Therefore, the quality of welding drops down. In order to assure quality as well as high-efficiency, Tandem double-wire pulsed MIG welding is put forward in this paper, and the controller for it is developed.The pulsed controller, with micro-controller unit (MCU) as the core, light emitting diodes (LED) and keyboard as the man-machine communication interface, has been designed and developed in combination with electronic technology, automation theory and MCU technology. The controller can make the voltage change in frequency and amplitude on the base of a certain value. Hence, it can both control the heat input, which achieves refinement of HAZ structure and improve the tenacity, and shake the molten pool regularly to broken the grain. Furthermore, the controller is designed for duplex output according to push-pull mode, which can be applied for double-wire welding.During the welding process, photoelectric signal testing and analyzing system is applied for electric signal sampling such as welding current, voltage waveform and so on. Besides, high speed photograph is used in step of electric signal sampling, to analyze the droplet transition, arc behavior and its effect on welding current and voltage.Experiments prove the function and reliability of the controller. Welding parameters are optimized by adjusting the peak and base voltage value, pulse frequency, duty ratio and so on. It can be guide of high-efficient welding method and new double-wire pulsed welding machine.

Related Dissertations

  1. Research of Control for the Measuring and Adjusting System in the Eccentric Injection Well,TE937
  2. LED Display Screen System Design and Proteus Software Simulation Based on Single-Chip Microcomputer,TN873
  3. Study on On-Line Photoelectricity Detection System of Register Mark of Unit Photogravure Press,TS835
  4. Research on Control Methods for Shunt Active Power Filter,TN713.8
  5. The development of the new type of semiconductor laser power,TN248.4
  6. Study on Controller of Transmutative Fin Stabilizer Based on Embedded System,U664.72
  7. The Research of Microencapsulated Electrophoretic Displays,TN873
  8. Fast Readout in Holographic Storage Based on Photopolymer,TP333.4
  9. Development of new eddy current sensor,TP212.1
  10. Research on Water & Fertilizer Coupling Irrigation Control System,S277.9
  11. Design of Portable Colorimeter Base on Double-Mode USB Interface,TH83
  12. Research and Application for Subdividing for Moire Fringes,TH74
  13. Research and Analysis of a Spherical Particle Rising in the Liquid,O359
  14. Research on Influence of Laser Cutting Parameters on Cutting Quality for TC1 Alloy Slab,TG485
  15. Research of the Double Wire AC-DC Pulsed Arc Synergic Control,TG444
  16. Interaction of Femtosecond Laser Pulses with Metal Materials,TN249
  17. Research on a Motion Control System Based on ATmega128 Micro Controller Unit,TP368.12
  18. The Effect of High Temperature Precipitation on the Stress Corrosion Cracking of Al-Zn-Mg Alloy and Its Welding Heat Affected Zone,TG172.9
  19. The Design of Low Reactive Power Compensation of Smelting Electric Furnace,TM761
  20. Research and Design of 8 Bit MCU Based on RISC,TP332
  21. 400MPa grade low alloy high strength steel welding consumables and organizational performance research,TG42

CLC: > Industrial Technology > Metallurgy and Metal Craft > Welding, metal cutting and metal bonding > Welding equipment > Arc welding equipment
© 2012 www.DissertationTopic.Net  Mobile