Dissertation > Excellent graduate degree dissertation topics show

Research on Improving Service Life of MgO-C Bricks for LF Furnace Slag Line by Changing Composition of LF Slag

Author: QuSuJun
Tutor: LiZhiJian;ZhangShiPing
School: Liaoning University of Science and Technology
Course: Materials Engineering
Keywords: LF furnace Slag line MgO-C brick Pulverizing slag Chromium oxide
CLC: TF065.12
Type: Master's thesis
Year: 2007
Downloads: 112
Quote: 0
Read: Download Dissertation


The wear mechanism of MgO-C bricks is analyzed particularly based on the working conditions of MgO-C brick for LF slag line.Aimed at wear of MgO-C bricks for LF furnace slag line by reason of LF slag’s pulverizing,the cause of LF slag’s pulverizing are analyzed and also the effect of pulverization of LF slag on the series damage of Mg-O brick are analyzed.The effect of putting wasted chromite sand into the LF furnace’s reduce slag on inhibiting the pulverization of LF slag is investigated.And also its influences to the service life of MgO-C brick for LF slag line and the quality of billets are studied in this paper.The main conclusions as follows:1.Stabilizer with Cr2O3 can inhibit the pulvefizating of LF slag effectively.The damage of MgO-C bricks caused by pulverization of LF slag can be lessen and the lifetime of the refining ladle can be increased 17.5%by reason of forning a layer of non-pulverizing slag on the working surface of the MgO-C brick of refining ladle,so the consumption of refractory material can be decreased.2.Pulverizating of LF slag can be inhibited if the additiveamount of stabilizer with Cr2O3 be controlled between 4%-5%in testing conditions.The more stabilizer are put,the viscosity of slag willlll get higher and refining effect will get worse. 3.The reason of LF slag’s non-pulverized is that Cr2O3 dissolving intoα’—C2S formed a kind of solid solution which prevent the crystalline transformation of fiomα’ C2S toγ—C2S.4.There is no influences to the chemical composition of the steel liquid and the quality of the internal quality of continuous casting billets when putting the stabilizer with Cr2O3 into the slag,and also it can meet the standard.5.The stabilizer is a kind of wasted chromite sand.Recycling and utilization of it can decrease the cost of production.

Related Dissertations

  1. Research of Increase the Slag Resistance Function of Magnesia Carbon Brick by Changeding Graphite,TQ175.1
  2. Study on the Refining Technique of Ladle Furnace in Tonghuasteel,TF769
  3. Investigation on Behavior of Inclusions in Heavy Rail Steel (U71Mn),TF777
  4. Solution-based Synthesis and Characterization of Inorganic Nanomaterials,TB383.1
  5. The Research on Strengthen Reduction during LF Refining Process and EAF Flow Rhythm,TF769
  6. Study of Chromium Recycling from Stainless Steel Sludge to Product Chromium Trioxide,X756
  7. One kind of ladle furnace control system design and implementation,TP273.5
  8. Level 2 Automation System Design of Jigang LF Refining Furnace,TP29-A4
  9. Research and Implemation of Temperature Prediction Model of Molten Steel in LF and Alloy Model,TF769
  10. The Study on Ladle Furnace Control Technologies in PANGANG Corporation,TP29
  11. Research and Application of Refining Slag Containing Barium in LF,X757
  12. Based on Genetic Algorithm and BP Neural Network Prediction of LF end temperature,TF769
  13. Alumina sintering waste steelmaking slag refining,X758
  14. Research on Improving Property of MgO-MgO·Al2O3 Bricks Adhibited by the Cement Kiln Coating,TQ175
  15. Erosion Mechanism of Large Ladle Slag Lining Brick,TF063.4
  16. LF Process Computer System of Pangang Group,TP273
  17. Study on Prescription Optimization and Metallurgic Characteristic of Refining Slag in LF Furnace of Chongqing I&S Co,TF769
  18. Temperature Prediction and Controlling Model in LF Refining Process,TF769
  19. The Erosion Mechanism of Ladle Slag Lining Brick with Different Slagging Condition,TF703.6
  20. Characterization of Growth and Mechanical Properties of Chromium Oxide Coating Deposited by RF Magnetron Sputtering,TB383.2

CLC: > Industrial Technology > Metallurgical Industry > General issues > Metallurgical furnace > Masonry and repair of metallurgical furnaces > Refractories and other method of building materials > Massive refractory
© 2012 www.DissertationTopic.Net  Mobile