Dissertation > Excellent graduate degree dissertation topics show

Study on Selection of Cross-linkers and Templating Methods in Molecular Imprinting Technique

Author: ZaoReGuLi·NuEr
Tutor: TuErHong·MaiMaiTi
School: Xinjiang University
Course: Chemistry
Keywords: molecularly imprinted polymer cross-linker solid-phase extraction highperformance liquid chromatography dummy template method sacrifice templatemethod immobilized template method
CLC: O631.3
Type: Master's thesis
Year: 2012
Downloads: 175
Quote: 0
Read: Download Dissertation

Abstract


In this research, preparations of molecularly imprinted polymers (MIP) were studied, and an effective method, rational selection of the cross-linker in MIP design, was proposed. The dummy-template MIPs for Zidovudine were synthesized and used as solid-phase extraction sorbents, and then the SPE profile was optimized and used in the serum sample pretreatment. Utilizing dummy template and sacrificial template method, MIPs were prepared and the comparison was made. Immobilized template method was also used for the preparation of MIPs to study the amount of cross-linking agent on the imprinting effect. The main contents include:1. The best functional monomer and cross-linker were selected for zidovudine molecularly imprinted polymer by computer modeling. Choosing trimethylolpropane (TRIM), ethylene glycol dimethyl-acrylates (EGDMA), divinyl benzene (DVB) as cross linker and MAA as functional monomer, zidovudine molecularly imprinted polymers were prepared by dummy template method, and using4VP as functional monomer, nitrophenol molecularly imprinted polymers were prepared by traditional method. As well as, under the same experimental conditions, the corresponding control polymers (CP) were prepared using the three cross-linkers above without functional monomer. The binding constants, imprinting factors, adsorption capacities of all polymers in static adsorption and dynamic adsorption experiment were calculated. The imprinting effect was compared and proposed an effective method of rational selection of the cross-linker in MIP design. The results showed that DVB-based polymer had advantageous performances compared with the other two cross-linker based polymers for the preparation of AZT-imprinted polymer. And TRIM-based polymer had advantageous performances compared with the other two cross-linker based polymers for the preparation of4NP-imprinted polymer. For the CP, DVB was found as more inert towards zidovudine. TRIM was found as more inert towards nitrophenol. Finally, we proposed an effective method of rational selection of the cross-linker in MIP design; it proved that a cross-linker, which is most inert toward the template molecule, could be considered as the best for the preparation of molecularly imprinted polymer. It is possible to suggest that highly-specific molecularly imprinted polymers could be designed using computational modeling which selects the functional monomer with highest binding energies and a cross-linker with lowest binding energy towards the template.2. The dummy-template molecularly imprinted polymer of Zidovudine was used as solid-phase extraction sorbents, after optimization of SPE profile used in the serum sample pretreatment. It was determined that the best imprinting effect were obtained with loading in1mL of K-phosphate buffer pH=7, washing with1mL of2%(V/V)acetonitrile/phosphate buffer, eluting with hydrochloric acid:methanol=10:90. MIP and NIP showed high binding capacity in the buffer in breakthrough curve, and their capacity are9.10mg and1.77mg of drug/lg of adsorbent respectively. The dummy-template molecularly imprinted polymers were tested with zidovudine ester and lamivudine by adsorption experiment and showed comparatively high selectivity for AZT. The SPE eluent of AZT in spiked human serum was determined by HPLC, and recoveries of the analyte on MISPE and NISPE were99.3%and13.2%respectively. It was concluded that the dummy template MIP can be used for selective extraction of AZT serum sample without template bleeding.3.Using dummy template and sacrificing template method AZT and4-NP molecular imprinting polymer were prepared.Through the static adsorption experiment,the comparativity on the adsorption capacity of each polymers was studied.results show that,the imprinting efects and binding abilitys of the sacrificial spacer method molecularly imprinted polymers higher than Dummy-template molecularly imprinted polymers.4.Using immobilized template mathod the AZT mip was prepared with different ratio of cross-linker,the binding constant, imprinting factor, adsorption capacity for all polymers in static adsorption experiment were calculated and the amount of crosslinking agent on the imprinting effect was evaluated.results show that,use the immobilized template,significantly reduced the amount of crosslinking agent still can get better imprinting efficiency of molecularly imprinted polymer.

Related Dissertations

  1. Preparation, Evaluation, and Application of Several Natural Product Molecularly Imprinted Polymers,R284.1
  2. The Application of Eggshell Membrane for Solid-phase Extraction and the Determination of Trace Metal Elements in Environment Water,X832
  3. Study on Separation、 Preconcentration and Analysis of Trace Elements with Carbon Nanometer Materials,TB383.1
  4. Study of Solid-Phase Extraction Coupled with Atomic Spectrometry for Separation and Preconcentration of Trace Metal Ions with Microcrystalline Anthracene,X832
  5. Molecularly Imprinted Polymer Microspheres and Evaluation,O631.3
  6. For drug ingredients isolated molecularly imprinted polymer microspheres preparation , properties and application of testing,O631.3
  7. Imprinted Polymer Preparation and application of solid-phase extraction,O631.3
  8. Preparation and Characterization of Magnetic Molecularly Imprinted Polymer Microsperes,O631.3
  9. Preparation and Application in Solid-phase Extraction of Molecular Imprinted Polymeric Microspheres,O631.3
  10. Preparation and Performance Study of Nicotinic Acid-Imprinted Polymers with Silica Gel as Sacrificial Carrier,O631.3
  11. Study on the Regeneratable Gel Systems of Degrated Glactomannan and Its Rheological Properties,O631.3
  12. The Construction of Engineering Bacteria for Degradating Erythromycin and Application in Source Water BAF Pretreatment,X703
  13. Preparation of Molecularly Imprinted Polymers Using Melamine as the Template and Its Application in Milk Powder,TS252.7;R155.57
  14. Preparation and properties of chlorogenic acid molecular imprinting system computer simulation and composite membranes,TB383.2
  15. Preparation of Dummy Template Imprinted Polymers at Surface of Silica Submicroparticles for the Selective Extraction of Trace Bisphenol a from Water Samples,X832
  16. Preparation of Quinolones Molecularly Imprinted Polymer Microspheres and Study of Its Specific Adsorption Performance,O631.3
  17. Research on the Synthesis and Properties of EGCG-molecularly Imprinted Polymer,O631.3
  18. Preparation of Molecularly Imprinted Polymers Via Atom Transfer Radical Polymerization,O631.3
  19. Study on Preparation and Application of estradiol-imprinted Microspheres Using Modified Precipitation Method,O631.3
  20. Synthesis and Molecular Recognition of Flavonoids Functional Factors of Traditional Chinese Medicines-Imprinted Polymer,O631.3
  21. Study on the Preparation Methods and Recognition Properties of Fluoroquinolones-Molecularly Imprinted Sol-Gel Sorbents,TQ424

CLC: > Mathematical sciences and chemical > Chemistry > Polymer chemistry ( polymer ) > Polymer physics and physical chemistry of polymers > The chemical nature of polymers
© 2012 www.DissertationTopic.Net  Mobile