Dissertation > Excellent graduate degree dissertation topics show

Research on Microstructure Simulation and Properties of Continuous Cast-rolling Lead Anode Plate

Author: JiangHongFeng
Tutor: LiJianPing
School: Central South University
Course: Mechanical Engineering
Keywords: Lead anode plate Continuous cast-rolling Microstructure Properties
CLC: TG335
Type: Master's thesis
Year: 2012
Downloads: 63
Quote: 0
Read: Download Dissertation

Abstract


The lead alloy strips are widely used in the copper and zinc electrowinning, whose electrochemical and mechanical properties have direct impact on the energy consumption and the service life of anodes. In order to effectively reduce the energy consumption and increase the service life of anodes, there are a lot of research on the compositiones of lead alloys, but less on the molding process. It’s the first case that continuous cast-rolling method is used for the preparation of the lead anode plate. As we all know, cast-rolling is a very complex process, there are varieties of influencing factors in it. It’s difficult to find the matching relationship between the various process parameters simply through a number of experiments. In this paper, the finite element simulation is used to study the characteristics of solidification of cast-rolling lead anode plate and the impact of the change of process parameters on solidification structure. The simulation results were verified by practical experiments. The verification results show that simulation and experimental results are good consistency.The related properties of the lead anode plate prepared by continuous cast-rolling method were studied through the devices of Leica DMI5000M metallurgical microscope, JSM-6490LV scanning electron microscope, QJ19one-twinned brachial electric bridge, CSS-44100electronic universal testing machine, HW-187.5Brinell hardness tester and so on. Concrete work are as follows: I The finite element simulation theory of heat transfer, liquidity, the nucleation and growth are used to build the Temperature-Flow-Structure coupling finite element model of the solidification process of lead anode plate. The model was simplified through appropriate assumptions and then the boundary conditions of the simulation was determined.II The CAFE module in the Procast and Deform-3D was used to simulate and analyze the solidification structures of cast-rolling lead anode plate. The nucleation and growth of the lead alloy were the focus of the study. The impactes of cast-rolling speed and pouring temperature on the solidification structures were analyzed systematically, which provides the theoretical basis for both the optimization of the processing parameters and the control of the solidification structure and strip quality.Ⅲ Based on the results of finite element simulation analysis, the continuous cast-rolling experiments of lead anode plate were carried out. The microstructure and properties of roll casting quaternary Pb-Ag-Ca-Sr alloys before and after subsequent rolling were investigated through anodic polarization stable potential, corrosion rate, surface morphology before and after polarization, conductivity, tensile properties and hardness. The result show that:the corrosion resistance is1.48times as that of the original lead anode plate; the ultimate tensile strength σb and yield strength σp0.2increase by28.5%and79.4%, respectively; the hardness also increases2.8HBS.

Related Dissertations

  1. A Research on Factors of the Establishment American Family Properties Decalaration System,D771.2
  2. The Preparation and Thermoelectric Properties of Rare Earth Subsituted Ag Composite Ca3Co4O9-Based Oxides,TQ174.1
  3. Synthesis, Structure and Properties of PBO/SWNT Composite Fibres,TQ340.64
  4. Preparation and Tribological Properties of TZ3Y20A-SrSO4 Ceramic Matrix Composites,TB332
  5. Reactive Hot-Pressing and Mechanical Properties of （ZrB2-ZrO2）/BN Composites,TB332
  6. Research on Welding Characteristics of CO2 Laser-GMA Hybrid Welding for Ultra-Low Carbon Bainitic Steel,TG456.7
  7. Microstructure and Mechanical Properties of Mg-Zn-Y-Zr Alloys,TG146.22
  8. Investigation on Microstructure and Properties of Cadmium-Free Silver-Based Intermediate Temperature Filler Metals,TG425.2
  9. Research on Technology and Mechanism of Joining Cemented Carbide to Carbon Steel,TG454
  10. Simulation and Experimental Study on the Scattering Properties of Two Dimensional Rough Surfaces,TP391.41
  11. Urothermal Synthesis, Structure and Characterization of Functional Coordination Polymers,O631.3
  12. Effects of the Exotic Invasive Plant Solidago Canadensis L. on the Community Structure of Soil Anmals,S451
  13. Purification of Endogenous Proteases from (Litopenaeus Vannamei) Shrimp Head and Their Enzymology Properties,S985.21
  14. Rock-fill Concrete Experiments on Comprehensive Properties and Studies on Thermal Stress,TU528
  15. Effects of Enzyme/Chemical Agents on Refining of Plant Fiber,TS713
  16. Study on Preparation and Properties of Protein Isolates from Tilapia,TS254.4
  17. The Investigations on the Characteristics and Mechanism of NIR Emission from Bi-doped Silicophosphate Glasses,TQ171.1
  18. Study on the Recycling of Post-Consumer Polyester Textiles,X791
  19. Research and Development of Wear Resistance for Physically Disabled Men Jackets,TS941.2
  20. Fabricationand Properties of SiC-AlN Multiphase Ceramics Prepared by Gelcasting,TQ174.62
  21. Flexible,rigid,Synthesis and characterization of mixed ligand complexes,O621.1

CLC: > Industrial Technology > Metallurgy and Metal Craft > Metal pressure processing > Rolling > Rolling process
© 2012 www.DissertationTopic.Net  Mobile