Dissertation > Excellent graduate degree dissertation topics show

The Simulation of the Production Line for Sheet Metal Parts Based on QUEST and Its Development

Author: ZhangLi
Tutor: LiuChun
Course: Aviation Aerospace Manufacturing Engineering
Keywords: simulation QUEST production line
CLC: TG385.9
Type: Master's thesis
Year: 2011
Downloads: 53
Quote: 0
Read: Download Dissertation


With the restructuring of global manufacturing, a large number of advanced manufacturing technology concepts have been proposed. As one of advanced manufacturing technology, production system simulation is widely used. Many problems are effectively solved through the use of the technology, for example: a real production line testing will destroy the normal operation, it is difficult to change parameters as expected or to get the required test conditions, test time is too long, the cost is too much or the experiment is dangerous etc. As an excellent production system simulation platform, QUEST gives users both a graphical user interface (GUI) for fast model-building and a powerful programming language for robustness and accuracy, supporting simulation analyses at every level of detail and user expertise.In this paper, the production line for sheet metal parts is simulated with Quest. First, geometric modeling techniques were applied to sheet metal production line, SCL simulation language was used for the process logic and rout logic, the batch programs was developed combined with the SCL and BCL simulation language for part creation , deletion and process information , the simulation of the production line for the sheet metal parts was realized finally. Then the capacity was assessed, the utilization of equipment and personnel was quantified, the output of the simulation data was analyzed. On this basis, the improved scheme was proposed and the original simulation model and logic and were adjusted to achieve an improved simulation program. At last the improvement program is simulated and compared with the previous.

Related Dissertations

  1. The Setting Bases of Working Pressure in LNG Systems and Orthogonal Experiment Design of Heat Exchangers,TQ051.5
  2. Study on Springback of High-Strength Steel Stamping,TG386
  3. Numerical Simulation and Experiment on Hydroforming of Cups with Controllable Radial Pressure,TG386
  4. Research on Technology and Mechanism of Joining Cemented Carbide to Carbon Steel,TG454
  5. Satellite Attitude Determination Based on Gyro and Star Sensor,V448.2
  6. Numerical Simulation of Film Cooling in Turbine Cascade with Non-Axisymmetric Endwall Method,V231.3
  7. High Speed Aerodynamic Convection and Coupled Heat Transfer of Complicated Bodies,V215.4
  8. The Analysis on Characteris of Vibration Source about Vertical Vibration of Surrounding Environment Induced by Rail Transit,U211.3
  9. Simulation Analysis on Temperature Stress of RCC Arch Dam and Its Construction Joints Design Research,TV642.2
  10. Study on the Heat Transfer Characteristics of Particle Cluster in Circulating Fluidized Bed,TK124
  11. Numerical Simulation of SNCR Process of a 600MW Utility Boiler,TK222
  12. Numerical Simulation of Biomass Direct Reburning,TK16
  13. Numerical Simulation on Pulverized Coal Combustion Process in a 670T/H Tangential Firing Furnace,TK224.11
  14. Numerical Simulation on the Combustion Process in the Furnace of a 1000MW Lignite-Fired USC Boiler,TK224.11
  15. Study on Gas-Solid Two-Phase Flow in Spouted Beds,TK173
  16. Experimental Study and Numerical Simulation on Aerodynamic Field of Tangential Bias Swirl Burner,TK223.23
  17. Characteristic Study of Combustion in Central Reverse Flame Chamber,TK223.21
  18. Numerical Simulation and Contrastive Analysis of Labyrinth Seals and Leaf Seals,TK263.2
  19. Scene Modeling for Simulation of Hyperspectral Remote Sensing System,TP72
  20. Design the Control System of Ocean Wave’s Simulation Table Based on Theory of Fuzzy Turning PID,TP273.4
  21. Numerical Study on Phosphorus Distribution in Water Environment of the Three Gorges Reservoir,X832

CLC: > Industrial Technology > Metallurgy and Metal Craft > Metal pressure processing > Cold stamping ( sheet metal processing) > Cold punching machinery and equipment > Cold stamping automation
© 2012 www.DissertationTopic.Net  Mobile