Dissertation > Excellent graduate degree dissertation topics show

The Experimental Research of Boiling Heat Transfer with TiO2Nanotubearrays Surface on Titanium

Author: WangXinLiang
Tutor: ShiXiaoPing
School: Hebei University of Technology
Course: Chemical Process Equipment
Keywords: TiO2 nanotube arrays enhanced heat transfer anodic oxidation
CLC: TQ134.11
Type: Master's thesis
Year: 2013
Downloads: 7
Quote: 0
Read: Download Dissertation

Abstract


More and more heat transfer enhancement techniques are used in the industry,However, with the progress of science and technology, high integration, great heat flow,micro system put forward new requirements to heat transfer. It is imperative to exploit moreefficient heat transfer enhancement techniques. Thus, nano heat transfer enhancementtechnology arises as the times require, and soon become the hot area all over the world.TiO2Nano-film surface with advantages of gas-sensitivity, humidity-sensitivity, dielectriceffect, photovoltaic effect, high catalytic activity are widely used in solar cell, self-cleaningmaterials, photocatalytic degradation and gas sensor, etc. TiO2nanotube array film surfaceas a new form of TiO2nano-film surfaces, which is ideal enhanced boiling heat transfersurface comparing with others, has the bigger specific surface area and better adsorptionproperty. Thus studying heat transfer enhancement of TiO2nanotube array film surface isvaluable in engineering.Two kinds of TiO2nanotube array film with different structure of tube arrays wereprepared respectively on the heat transfer surface of titanium heat exchanger plate and tubein inorganic and organic electrolytes via anodic oxidization. Taking deionized water asworking fluid, boiling heat transfer properties of nanotube array film surface （modifiedsurface） were studied in pool boiling and flow boiling respectively. The resultsdemonstrated that the boiling heat transfer coefficient of modified surfaces whether poolboiling and flow boiling were both higher than that of smooth, and the boiling heat transfercoefficient of modified surface （P1） prepared in organic electrolyte was higher than that ofmodified surface （P2） prepared in inorganic electrolyte. In the pool and flow boiling, theycould be increased80%110%and40%90%times respectively, meanwhile, the flowpressure drops of modified surface and smooth surface were little difference, modifiedsurface didn’t significantly increase the pressure loss due to changes of surface morphology,and mass velocity had little effect on heat transfer enhancement of modified surfaces.Through observing with the CCD, we found that the bobble detachment radius ofmodified surface was smaller than that of smooth surface, and the bubble’s density anddetachment frequency became higher. It also reflect principle of modified surface enhancedboiling heat transfer, that many nano holes in film layer significantly improved the liquidboiling vaporization core number, consequently enhanced the efficiency of the boiling heat transfer.In this pape, using the least square method and revising coefficient of Gungor model’sinhibiting factor, we obtained pipe flow boiling heat transfer coefficient formula ofmodified surface, this formula were in good agreement with experimental data and the erroris within20%.

Related Dissertations

  1. Studies on the Synthesis and Technology of Dipentaerythritol and Its Derivative,TQ223.164
  2. The Study of Preparation and Photocatalytic Activity of TiO2 by Electrospinning,O614.411
  3. Of Bi N Co-doped TiO \u003csub\u003e 2 \u003c/ sub\u003e of the preparation and performance,O614.411
  4. Investigation of Fabrication, Characterization and Property of Fuctional Titanium Dioxide Nanoporous Materials,TB383.1
  5. Investigation of Preparation and Properties of Ordered Porous TiO2,TB383.2
  6. Preparation and Performance of V2O5-WO3/MOx/Cordierite Catalyst Modified with Cu、Mn、Ce for DeNOx,X701
  7. Nano LaFeO 3 Controllable Synthesis and TiO 2 bridged construct composite photocatalyst,O643.36
  8. Study on Modification of ZnO-TiO2 Composite Catalyst and Its Photocatalytic,X703
  9. Modification and its impact on TiO 2 surface photovoltaic properties of the mechanism,O614.411
  10. Preparation of TiO2 Microspheres and the Study of Their Properties,O614.411
  11. Photocatalytic Bactericidal of Er3+-Yb3+-Fe3+ Tri-doped TiO2 under Visible Light,O643.36
  12. Preparation of Titania Photocatalyst Supported on Carbon Fiber and Its Photocatalytic Activity under Visible Light,O643.36
  13. Preparation of Inorganic Nanometer Antibacteria Agent and Their Antibacterial Mechanism in the Natural Fabric,TS195.2
  14. The Study of Preparation and Photocatalytic of Compound Nanomaterials TiO2/SnO2,O643.36
  15. Visible oxide catalyst with high activity and mechanism of Design and Synthesis,O643.36
  16. Study on Adsorption of Sn （Ⅳ） and Ce （Ⅲ） on TiO2 Nanoparticles,O647.32
  17. Antibacterial plastic with silver coating developed,TQ637
  18. Preparation of Platinum Loaded TiO2 Nanotubes and Its Photocatalytic Performance,TB383.1
  19. Efficient Hydrogen Production by Modified TiO2 Photocatalysis,TQ116.2
  20. Hydrogen Evolution Process of Water Electrolysis Assisted by TiO2 Nanotubes and TiO2/ZnO Nanorodes Assembled on Ni Substrate,TQ116.21
  21. Nano- TiO 2 Photocatalytic Preparation and characterization of composite films,TB383.2

CLC: > Industrial Technology > Chemical Industry > Inorganic compounds, the chemical industry of the metal elements > Section IV metals elements inorganic compounds > Inorganic compounds of the element titanium vice family ( IV B family) > Inorganic compounds of titanium
© 2012 www.DissertationTopic.Net  Mobile