Dissertation > Excellent graduate degree dissertation topics show

The Research on Casing Designing and Casing Running for Extended Reach Well

Author: ChenBin
Tutor: HuangZhiQiang
School: Yangtze University
Course: Petroleum and Natural Gas
Keywords: Extended Reach Wells Casing Strength Casing Running FloatingCoupling
Type: Master's thesis
Year: 2013
Downloads: 155
Quote: 0
Read: Download Dissertation


In recent years, with the development of offshore oil field exploration expands in shallow and deep oil field, the application of extended reach wells becomes widely used for its cost advantage. However, for the complex drilling conditions of extended reach wells, higher requirements in casing string design and casing running technology are required. Because the large deviation angle, long open hole and deep casing point, the load on the casing becomes increasingly heavier and complex. During the casing design process, we should not only consider the influence of friction drag, but also the influence of the bending of the casing produce additional axial force, thermal loading, high temperature in the pit, casing wear, casing corrosion etc. In current design standard of casing strength in petroleum and gas (SY/T5724-2008), force analysis of casing and its string is not quite comprehensive, influencing factors are not systematic, oil and gas casing strength industry the casing stress analysis consider insufficient system, and lack of design method and casing technology for the casing string of extended reach wells.Therefore, aiming at the optimization design and casing running technology for ultra-deep casing string of extended reach wells, to form a set of scientific optimal design and casing running technology can contribute to the security of extended reach wells’cementing string; lower the cost of cementing and meet the growing cementing project needs of extended reach wells.This article comprehensively considers many influencing factors, focuses on the external loading analysis of casing string, calculation of casing strength, theoretical approach of casing strength design in the extended reach wells’ drilling conditions, to put forward suitable design procedures for casing strength of extended reach wells. In addition, the casing running technology of extended reach wells, the casing feasibility of casing running from the perspective of geometry and force, the calculation method for fluctuating pressure of casing running and maximum allowable casing speed, matching technology for casing running by floating and its field application, those are all lucubrately studied in this paper. To form a systematic construction technique for casing running of extended reach wells, and provide technical guidance for the site under the casing construction.

Related Dissertations

  1. Casing Strength Theoretical and Experimental Study of Thermal Recovery Steam Injection Wells,TE931.2
  2. A Research on Load Analysis & Optimized Design of Casing Strings in Oil & Gas Wells,TE21
  3. Strength Satety Analysis for Perforated Casing in High Temperature and High Pressure Deep Well,TE257.1
  4. Research and the Risk Assessment of Casing Burst Strength after Casing Wear,TE931
  5. Inlfuence of Casing Inner High Gas Pressure Wells Bearing on Resisting Pressure Performance,TE931
  6. Effecting Factors Study on Strength and Toughness of N80HFW Casing,TE931.2
  7. Feasibility Study on Case Running of Ultra-Deep Horizontal Wells in Halahatang Block,TE256.2
  8. The Research of Casing String Strength Design in Deep Well,TE931.2
  9. Application of GA in Casing String Optimum Design of Petroleum Engineering,TE931
  10. Casing Running Force Analysis and Float Coupling Design for Extended Reach Well,TE931.2
  11. Perforating the casing strength of research,TE257.1
  12. Research on the Calculation Method of PDF of Casing Strength,TE931.2
  13. Study on the Technology Parameters Optimization of Hydraulic Slotting Casing Perforation,TE257
  14. Mechanical Calculation and Judgement of Casing Failure,TE931.2
  15. The Application of Finite Element Method in the Strength Analysis of Casing after Hydraulic Sand Blast Slotting and the Optimization of Its Technological Parameters,TE931
  16. Casing string design the new method and its software development,TE931
  17. Cementing Design Optimization Method and Application,TE256
  18. Study on Offshore Reverse Circulation MPD Technology Using Dual Concentric Strings,TE52
  19. Research on the Drilling Fluid Density Window and Casing Layers Design in Deep Water,TE52
  20. Dynamic Response Analysis of Riser,TE52
  21. Control Strategy for Subsea Mudlift Drilling System,TE52

CLC: > Industrial Technology > Oil and gas industry > Offshore oil and gas exploration and development > Offshore oil and gas drilling engineering
© 2012 www.DissertationTopic.Net  Mobile