Dissertation > Excellent graduate degree dissertation topics show

Preparation and Property Study of PANI/PPTA Composite Conductive Fiber

Author: LiMin
Tutor: PanZhiJuan
School: Suzhou University
Course: Textile Engineering
Keywords: polyaniline (PANI) aramid conductive fibers in situ polymerization
CLC: TS102.5
Type: Master's thesis
Year: 2013
Downloads: 53
Quote: 0
Read: Download Dissertation

Abstract


As a member of conjugated conducting polymers, polyaniline (PAN1) exhibits unique properties, has high electrical conductivity, be able to be doped, excellent environment stability and low cost. Conductive aramid fibers were prepared by in situ polymerization to form polyaniline layers on the surface of aramid fiber. In order to increase the fastness and uniformity of aniline on aramid fibers, we carried plasma treatment on aramid fibers. The influence factors of in situ polymerization and plasma treatment on aramid fibers was studied.1. Studying the effect of the processing conditions on the electrical conductivity of the fibers, the factors contain the types and concentrations of oxidant and doping acid, content of aniline monomer, reaction time and temperature. The optimal processing paramenters of in-situ polymerization were worked2. The effect of the pressure,power, processing time of low temperature plasma treatment condition on the electrical conductivity of fibers was studied.3. Studied and analyzed the structure and the property of the polyaniline/PPTA compound conductive fiber by using scanning electron microscope (SEM), infrared spectroscopic analysis (FTIR), thermogravimetric analysis (TGA) and tensile test.4. Studied the washing fastness and durability of the electrically conduction fibers. Also, studied the conductivity of fibers when in high temperature and washing with acid-proof and anti alkaliproof.According to the experiments and analysis described in this dissertation, the following conclusions can be made:1. The optimum process is carried out at20℃for2hours with ammonium persulfate25g/L, hydrochloric acid0.6mol/L and aniline monomer16g/L, and the electrical conductivity reached0.47S/cm.2. The three optimal plasma treatment parameters are:processing power is90W, processing time is3min, pressure is40Pa; 3. Comparing with electrical conductive fibers without plasma treatment, electrically conductive fibers with plasma treatment have higher electrical conductivity.4. The analysis of FT-IR indicated that the composite fibers were the mixture of PANI and aramid. The mechanical and thermology properties were as good as before.

Related Dissertations

  1. Preparation and Property Study of Polyaniline/Polyester Composite Conductive Fabric,TS195.6
  2. Studies on the Preparation of 20% Chlorpyrifos CS and Its Analytic Methods,S482.3
  3. Polyaniline / short fiber reinforced natural rubber properties,TQ330.1
  4. Study on the Mechanical Properties of Short Cut Aramid Fiber Reinforced Cement Mortar Composites,TU578.1
  5. Preparation and Research of the PbSe Quautum Dot Doped PMMA Fiber Materials,TB383.1
  6. Study on Structure and Properties of Aramid Spunlaced Nonwovens,TS176
  7. Preparation, Characterization and Preliminary Study for the Application of Shape Memory Polyurethane-silica Hybrids,TB383.1
  8. Properties on Aramid 1313 Fabric and the Compound Silastic Rubber Composite Material with This Fabric,TB332
  9. Study on DNPH and SSS Modified Polyaniline-based QCM Sensors in Cultural Relics Conservation Micro-environment,TP212
  10. Electroless Silver Plating on the Polyester Fibers and Polyamide Fibers Modified by 3-Mercartopropyltriethoxysilane,TQ342.2
  11. The Preparation of Electrophoretic Display Microcapsules and the Building of Y-Shape Micro Channel Reactor,TB383.4
  12. Study on Resins’ Influence on Properties of Porous Aramid Non-Woven Composite,TB332
  13. Development and Study on Relative Practical Properties of Flame-Retardant Mattress Fabric,TS106
  14. Preparation and Properties Research on Polyacrylonitrile/Graphene Oxides Compounds,TQ340.1
  15. Carbon nanotubes doped polyaniline and its application in gas sensors,TB383.1
  16. Functional aramid and polyimide Preparation and structural properties of,TB34
  17. Jasmine fragrance microcapsule Preparation and Application of cotton fabrics,TS195.6
  18. Fire service thermal comfort and thermal protection of research,TS941.15
  19. Preparation and Research of the Organic Polymer/silica Hybrid Materials,TB383.1
  20. The Surface Modification of Aramid Fiber and the Compound Performance between Aramid and Rubber,TQ330.1
  21. Surface Modification of Nano-CaCO3 and Effects on Properties of HDPE,TQ325.12

CLC: > Industrial Technology > Light industry,handicrafts > Textile industry,dyeing and finishing industry > General issues > Textile fibers ( textile material ) > Chemical fiber
© 2012 www.DissertationTopic.Net  Mobile