Dissertation > Excellent graduate degree dissertation topics show

Preparation and Properties of Multilayered Low Temperature Cofired PZT-PMS-PZN System High-Power Piezoelectric Ceramics

Author: ChenJing
Tutor: WangYiPing
School: Nanjing University of Aeronautics and Astronautics
Course: Materials Science
Keywords: High-power Piezoelectric ceramics Low temperature cofired PZT-PMS-PZN Tape-casting Multilayer
CLC: TM282
Type: Master's thesis
Year: 2013
Downloads: 12
Quote: 0
Read: Download Dissertation

Abstract


More than half of the actually used piezoelectric ceramics are high power piezoelectric ceramics. Recently, low temperature cofired high power piezoelectric materials have received a great deal of attention in order to lower the driving voltages of piezoelectric ceramics, to shorten their response time, to improve their overall performance and stability during applications, and to strengthen their ability to resistant high temperature, high humidity, attack and vibration.0.90Pb(Zr0.52Tio.48)03-0.05Pb(Mn1/3Sb2/3)03-0.05Pb(Zn1/3Nb2/3)03(0.90PZT-0.05PMS-0.05PZN) quaternary piezoelectric ceramics have excellent electrical properties(d33=369pC/N,Qm=1381,kp=64%,tanδ=0.44%, ε33T=1600), and thus is the ideal material of high power piezoelectric ceramics in application. Based on this system, the effects of the addition of Li2CO3with different contents on the properties of low temperature sintering of this material have been investigated. The results indicated that Li2CO3can reduce the sintering temperature, and the material added03wt%Li2CO3and sintered in900℃have the best electrical properties:d33=276pC/N, Qm=700, KP=46.1%, tanδ=0.24%, ε33T=1033. As well, the effects of adding sintering additives Li2CO3and CuO were also compared on the low temperature sintering properties of the material. The results showed that although the addition of Li2CO3improves the electrical properties of ceramics wore than CuO but certain vibration performances better than CuO.Secondly, the specific tape-casting technology to make0.90PZT-0.05PMS-0.05PZN+lwt%CuO piezoelectric materials were also studied,various parameters of technologies were optimized, and the optimum technology was finally proposed. The experimental results indicated that the performances of the ceramics made through tape-casting technology were better than that through solid-state reaction method.Finally, the technology to make0.90PZT-0.05PMS-0.05PZN+1wt%CuO multilayered low-temperature cofired ceramics was explored. Eventually, the process of the silk screen printing, the silver paste suitable for low temperature cofired technology and the best technology of exhaust glue, sintering and polarization were determined. The properties of the multilayer and single layer ceramics made in the technology proposed here were also compared. The results showed that there are no significant differences between multi-layer and single-layer ceramics in properties of dielectric loss. Though the mechanical quality factor of the multi-layer ceramics reduced with increased layer number,but their piezoelectric coefficient and dielectric constant increased linearly with layer number. Moreover, the multi-layer ceramics exhibited a better performance of vibration than the single-layer ceramics during vibration experiments. Therefore, compared to single-layer ceramics, multi-layerceramics have more advantages for the miniaturization and integration of function components.

Related Dissertations

  1. Synthesis and Characterization of BiFeO3/La0.7Sr0.3Mo3 Multi-layer Film,TB383.2
  2. Micro- array filter connector plate moments chip design,TN402
  3. Dali construction tender BOQ electronic evaluation system design and implementation,F284
  4. Capital settlement enterprise project management system design and implementation,TP311.52
  5. Research on Survivability of Key Technologies in Multi Domain and Multi Layer Optical Network,TN929.1
  6. Study on the Technique for Transmission-zeros of LC Filters Constructed on Multilayer Substrates,TN713
  7. Study on Stacked-lc Bandpass Filters Constructed on Multilayer Substrates,TN713.5
  8. A Novel Multiport Matching Network Model of an Indoor MIMO System,TN919.3
  9. Study on the Technique for Stacked-Multistage Cascaded LC Band-pass Filters on Multilayer Substrates,TN713.5
  10. Magnesium alloy arc ion plating metal nitride thin films,TG174.444
  11. Fire service thermal comfort and thermal protection of research,TS941.15
  12. Tunable Magnetic Anisotropy of Cobalt-based Magnetic Nanowire Arrays,TB383.1
  13. Research on Preparation and Magnetic Properties of NdFeB/Mo Multilayered Films,TM273
  14. Research of Image Segmentation Based on Improved Fast Watershed Algorithm,TP391.41
  15. Research and Practice of the intelligent Web - based courseware publishing platform,TP311.52
  16. Study on Band-pass Filters Based on Triangle SIW Resonators,TN713.5
  17. Research on Propagation of Ultrasonic in Multilayer Structure with Dissimilar Materials,TG115.285
  18. Hardness and Optical Transmittanee of Ti/TiN Multilayer Films Deposted by Magnetron Sputtering,TB383.2
  19. Digital Campus Design and Implementation of School,TP311.52
  20. Investigation of the Microstructure and Properties of Ti(C,N) Films Deposited by Reactive Magnetron Sputtering,TG174.44
  21. Study on Structure-Properties-Processing of PA/EVOH Multilayer Co-Extruded Barrier Films,TQ320.721

CLC: > Industrial Technology > Electrotechnical > Electrical materials > Electric and ceramic materials > Piezoelectric ceramics
© 2012 www.DissertationTopic.Net  Mobile