Dissertation > Excellent graduate degree dissertation topics show

Study of Flicker Detection and Flicker Transfer Characteristics Based on Dynamic Phasors Method

Author: KangJian
Tutor: ZhangPeiMing
School: Fuzhou University
Course: Motor and electrical
Keywords: Voltage flicker Transfer coefficients Dynamicphasors Induction motor Frequency characteristics Electricarc furnace
CLC: TM712
Type: PhD thesis
Year: 2010
Downloads: 20
Quote: 0
Read: Download Dissertation

Abstract


With the rapidly increase of impulse loads in power system, the voltagefluctuations and flicker of some areas have reached a very serious level. It ismeaningful for calculation of flicker limit,location and governance of flickersource to study flicker propagation.An improved detection algorithm of flicker value was proposed firstly asflicker detection was the basis of flicker analysis. The algorithm can solve theproblem that the measurement errors increased with higher flicker frequencies.A calculation method of flicker transfer factors based on dynamic phasorsmethod was proposed to study flicker transfer in power system. The existingmethods adopted calculation methods of steady circuit or steady power flow todescribe flicker propagation rules, lacking special study method of flickerpropagation rule.The dynamic phasor models of the general components of powersystem which are suitable in flicker study were established by dynamic phasorsmethod. With the Kirchhoff’s voltage and current law in dynamic phasor domain，the dynamic phasor models of the electric power grids were established and asimplified flicker transfer regularity were derived finally. The above flickertransfer regularity was compared with the current flicker transfer calculationmethods. The analysis shows that the current flicker transfer calculation methodsare more accurate only when the impedance angle of various impedances of powersystem are close and the method proposed in this paper is more generic.To study the effect of induction motor on flicker transfer,the dynamic phasemodel of three-phase induction motor applicable for flicker study was established.The basis of the model was the voltage equations, electromagnetic torque equationsand basic equations of motion. In the case of fluctuant source voltage, the modelrealized the quantitative calculation of stator current inter-harmonics componentsand variation quantity of rotor mechanical angular velocity of induction motors. Onthe basis of that, the frequency characteristics of flicker transfer under motor loadswere deeply studied. The study shows that when induction motors exist in powersystem, the flicker transfer from the source to the motor shows obvious frequencycharacteristics and the flicker transfer coefficients are concerned with the distribution of various flicker frequency components. The analysis also shows thatfor most flicker frequencies the induction motors help attenuation of flicker.To study the mechanism of voltage flicker caused by arc furnace operation, annew arc furnace model was proposed. The new model was dynamic model of arcfurnace described by multiple value volt-ampere characteristic curves, reflectingthe actual influence of arc length variation on volt-ampere characteristic curves. Onthe basis of that, the influencing factors of arc furnace flicker were furtheranalyzed.

Related Dissertations

  1. Based on single-phase induction motor control MCU,TP273.5
  2. The Research of Hydraulic Shock Absorber for the Anti-earthquake of Nuclear Power Plant,TB535.1
  3. Research on Sensorless Control of Induction Motor Based on Full-order Observer,TM343
  4. Control Technology for Square-wave Voltage Driven Multi-phase Induction Motors,TM343
  5. Research on Instrument for Measurement of Voltage Flicker,TM933.2
  6. The Research on Induction Motor VVVF Speed Regulation in Electric Traction,TM343
  7. Control Strategy Optimization of Induction Motor for Fuel Cell City Bus,TM343
  8. Analysis of Wind Characteristics and Wind Effects on A Cable-stayed Bridge Based on Field Monitoring,U448.27
  9. Two-motor Synchronous Speed-regulating System Based on Neural Network Control,TP273.5
  10. Six-phase Induction Motor Vector Control System Based on DSP,TM346
  11. Calculation and Analysis of the Electromagnetic and Temperature Fields in Off-grid Wind Generator under Different Conditions,TM315
  12. Analysis and Calculation of Iron Loss and Electromagnetic Force for High-voltage Induction Motor with High Efficiency,TM346
  13. Research on Transient Process of Winding Model with Subsection and Layer Structure under Narrow Pulse Voltage,TM595
  14. Simulation and Design of AC Motor Controller Used in Pure Electric Bus,U463.6
  15. Research on Micrometeorology Characteristics in the Surface Layer in Xiaotang of the North Taklimakan Desert,P404
  16. Research on the Dynamics of Lim Vehicle with Independently Rotating Wheels,U270.33
  17. Study on the Optical Fiber Acoustic Emission Detection and Location,TH878
  18. Stator Resistance Observation of Induction Motor DTC System Based on Adaptive Technology,TM346
  19. Research on Direct Torque Control of AC Drive System for Electric Vehicle,TM921.51
  20. Research on the Control for Linear Induction Motor Using Direct Thrust Control Based on DSP,TM346
  21. The double-tube type linear piston compressor control system,TH457

CLC: > Industrial Technology > Electrotechnical > Transmission and distribution engineering, power network and power system > Theory and Analysis > Power system stabilizer
© 2012 www.DissertationTopic.Net  Mobile