Dissertation > Excellent graduate degree dissertation topics show
The Oxidation and Creep Behaviors of P92 Steel in Steam at 600℃
Author: LangXin
Tutor: XuanFuZhen
School: East China University of Science and Technology
Course: Chemical Process Equipment
Keywords: P92 steel three point bending small specimen creep steam oxidation
CLC: TG142.15
Type: Master's thesis
Year: 2012
Downloads: 124
Quote: 0
Read: Download Dissertation
Abstract
|
The oxidation and creep behaviors of P92 steel in steam at 600℃were investigated by three point bending creep test method with small specimen. The machince was desigened for the creep test with small specimen, more steady and higher precision in different environment. Creep curves were measured from the sample under different forces in air and steam at 600℃. Then steady creep rate vs. force in air was used to evaluate the creep behavior based on Norton parameters B and n. In short time (200 h), slight deformation in oxidation was observed due to the protection of oxidation and thus improved the creep property. The thickness of oxidation under 250 N at 600℃was fitted to extract the steam oxidation rule. The microstructure surface morphologies were observed by SEM. A lot of holes were found as oxidation channels for exchange of metal ion and oxygen. The oxidation at the tensioned side was thicker than the compressed surface. The oxidation scale consisted of four distinctive layers including Fe3O4 as outer layer, CrFe2O4 as inner layer and two narrow transition layers. And the steam oxidation process mechanism were investigated. The theoretical formula was established for oxidation and creep model in order to predict the creep rate of oxidation. The matrtial parameters were fitted in terms of test data.
|
Related Dissertations
- A Study on Thermal-Mechanical Damage Behaviour of 60Si2Mn Steel,TG142.15
- The Study on the Creep Resistance Property of Ultra-High Molecular Weight Polyethylene Fiber,TQ342.61
- The Research of Concrete Shrinkage and Creep Experiment,TU528
- Research and Design on Control System of 4-D Gripper Based on Creep Characteristics Model of IPMC,TP273
- Mechanical Properties and Creep Effect of FRP Tube Filled Concrete-Concrete Slab Composite Beam,TU398.9
- Mechanical Property of Composite Beams of Concrete-filled Steel Tubular and T-beam and the Analysis of Concrete Creep Effect,TU398.9
- Research on Adaptive Inverse Control for the Hysteresis and Creep Characteristics of IPMC,TP273.2
- Uniform deformation laminate interlaminar stresses Numerical simulation and high-temperature creep behavior of 40Cr steel,TB33
- Four -step braided composites under different stress levels bending fatigue behavior,TB332
- Lacustrine soft soil physical and mechanical properties and the creep characteristics of,U212.22
- The Effect of Direct Electric Resistance Heat Treatment on the Mechanical Properties of Orthodontic NiTi Archwires,R783.5
- Based on creep properties of soil slope stability studies,TU43
- The Analysis of Subgrade Settlement after Construction Considering Rheology in Soft Soil Area,U213.1
- Design of Testing System and Study of Mechanical Properties of Small-scale Materials,TB301
- Investigations on Microstructures and Fracture Behavior of Layer-structured Biological Shells,TB39
- Study on Preparation and Properties of Aluminum Foam Sandwich by Mixing Elemental Powder Rolling,TB383.4
- The railway slope stability analysis considering soil creep,U213.13
- Mechanical Behaviors of Zr-based and Ti-based Amorphous Alloys,TG139.8
- Experimental Study on Fracture and Durability of Recycled High Performance Concrete,TU528
- Research on the Adhesion Control Mehtods Based on the Optimal Creep Rate,U211.5
- Evaluation of Bond Characteristics between Porcelain and Ti2448 Alloy,R783
CLC: > Industrial Technology > Metallurgy and Metal Craft > Metallurgy and Heat Treatment > Metallic materials > Steel > Microstructure and properties of steel > Analysis of the steel test
© 2012 www.DissertationTopic.Net Mobile
|